Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Spectral Hole-Burning and Related Spectroscopies: Science and Applications

Room-Temperature Persistent Spectral Hole Burning of Sm2+ in Disordered Fluorite-Type Single Crystals α-MALnF6 (M=Ca, Sr;A=Na, K, Rb;Ln=Y, La, Gd)

Nobuhiro Kodama, S. Hara, Yuka Inoue, Toru Seita, Kimihiko Hirao

Published Jan 1, 1994• 0 citations
Publisher

Abstract

Persistent spectral hole burning (PSHB) is expected to be a mechanism for future ultrahigh density multi-wavelength optical memory whose density can be higher than the conventional optical memory by 10 to 104 times. PSHB optical memories are mainly studied for dye-doped polymers, but the hole burning temperatures for such poleymers are limited to tempertures lower than 140 K [1], Recently room-temperature PSHB has been observed in Sm2+ doped halide crystals [2-4] and glasses [5], and borate glasses [6]. The halide crystals are not bulk single crystals but polycrystals.

DOI
10.1364/shbs.1994.wd22

Related papers

Room Temperature Hole-Burning in Sm2+-doped Borate Glasses

Kimihiko Hirao

Recently, the interests in optical memory based on persistent spectral hole burning (PSHB) are increased because of its possibility of the application to high density optical memory. PSHB was observed for an organic dye doped in polymer and rear earth or transition metal doped in inorganic crystal or glasses up to now. Since PSHB was observed by two Russian groups (Gorokhovskii et al. and Kharlamov et al.) for free base phthalocyanine in a n-octane Shpol'skii matrix1 and for perylene and 9-aminoacridine molecules in glassy ethanol matrix2, PSHB materials are studied primarily for the polymer doped with an organic dye. But such materials can make hole only at very low temperature. Room temperature PSHB phenomena were observed on Sm2+ doped fluoride crystals3-5 and glasses6 recently, however these materials' Гih(inhomogeneous line width)/Гh(homogeneous line width)'s which are the parameters of data multiplicity in PSHB optical memory are an order of unity. For the application of PSHB materials to optical memory, high operating temperature, high Гih/Гh, and rapid reaction rate are wanted. Glass has a superiority on the view point of optical memory application because of its broad inhomogeneous line width and productivity. Our group has discovered room temperature PSHB for Sm2+ in borate glass systems whose Гih/Гh is 24.7 PSHB for rear earth metal in glass matrix has not been studied seriously, yet. It is thought that the study of the relationship between the optical hole and glass structure is necessary.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1994•0 citations

Room-temperature persistent spectral hole burning of Sm2+ in disordered fluorite-type single crystals α-MALnF6 (M = Ca, Sr; A = Na, K, Rb; Ln = Y, La)

Nobuhiro Kodama, Shinichi Hara, Yuka Inoue +1 more

Journal of Luminescence•May 1, 1995•7 citations

Room-temperature persistent spectral hole burning of Sm/sup 2+/ in silicate-based fiber

Kentarou Nouchi, Tsuneo Mitsuyu, Kimihiko Hirao +2 more

Summary form only given. Persistent spectral hole burning (PSHB) of rare-earth-doped inorganic materials has attracted much attention in view of application to high-density optical memories. In particular, it seems that the glass materials are advantageous for application in wavelength-selective optical devices, as well as the memory devices, because of their large inhomogeneous linewidth. The wavelength-selective devices are key components in the wavelength-division multiplexing system, which is important for the next-generation optical communication technology. The problem for practical application lies in the fact that PSHB of rare-earth ions in glasses is usually observed only at temperature below 20 K. However, room-temperature PSHB has been observed recently for Sm/sup 2+/-doped crystals and glasses.

Conference on Lasers and Electro-Optics•Jan 20, 2003•0 citations

Room temperature spectral hole burning observed in Sm-doped mixed crystals

Zhiqiang Jin, B.Y. Yu, Hyun Sook Bae +4 more

For next generation high density optical storage, extensive studies on persistent spectral hole burning (PSHB) have been performed, because they have a large potential for a high density frequency-domain optical data storage. PSHB has been observed at room temperature in Sm-doped crystals and glasses. Among them, glasses are considered to be more favorable than single crystals, due to their wide inhomogeneous line width and easy process for mass production. In the study, we developed a new glass mixture which shows room temperature PSHB with a inhomogeneous line width broadened up to 70 cm/sup -1/. The PSHB was characterized by investigating the time decay pattern of fluorescence and the excitation spectra.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Jan 20, 2003•0 citations

Wavelength Dependence of Persistent Spectral Hole Burning in Sm2+-Doped Fluoride Glasses

Atusi Kurita, Masanori Tanaka, T. Hiyama +2 more

We reported the first observation of room-temperature persistent spectral hole burning in Sm2+-doped fluoride glass in the last conference [1]. Room-temperature hole burning had been also observed in Sm2+-doped crystals [2]. We found considerable differences in the hole-burning characteristics between Sm2+-doped glasses and Sm2+-doped crystals: The burning-laser-intensity dependence is approximately linear, and no antihole is observed around the hole burned in Sm2+-doped glasses [3]. More detailed experimental studies are needed to clarify the mechanism of the hole burning in this glass and to explore more efficient hole-burning systems. In this paper, we report several experimental results related to wavelength dependence of the hole burning process.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1994•0 citations

Spectral Hole-Burning Between 2 K and Room Temperature in Sm2+ Doped Substitutionally Disordered Microcrystals

Keith Holliday, Changjiang Wei, Mauro Croci +1 more

Photon gated spectral hole-burning was first observed in a samarium doped crystal, BaFCl:Sm2+ [1]. This material was of interest to the developement of optical memories as the holes were found to be stable to room temperature thermal cycling. Holes could be burnt at liquid helium temperatures but as the temperature was raised the line quickly became homogeneously broadened. The addition of bromine to the melt succeeded in broadening the inhomogeneous linewidths to about 2 nm through substitutional disorder [2] and persistent holes were observed at 77 K [3]. Subsequently, a study of the parameters for spectral hole-burning in a BaFCl0.5Br0.5:Sm2+ crystalline powder was performed [4] and the highest temperature for which persistent hole-burning had been observed was raised to 133 K. Here we report spectral hole-burning at room temperature (figure 1) in a related compound, Sr0.5Mg0.5FCl0.5Br0.5:Sm2+.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1991•0 citations
Persistent spectral hole burning (PSHB) is expected to be a mechanism for future ultrahigh density multi-wavelength optical memory whose density can be higher than the conventional optical memory by 10 to 104 times. PSHB optical memories are mainly studied for dye-doped polymers, but the hole burning temperatures for such poleymers are limited to tempertures lower than 140 K [1], Recently room-temperature PSHB has been observed in Sm2+ doped halide crystals [2-4] and glasses [5], and borate glasses [6]. The halide crystals are not bulk single crystals but polycrystals.
Recently, the interests in optical memory based on persistent spectral hole burning (PSHB) are increased because of its possibility of the application to high density optical memory. PSHB was observed for an organic dye doped in polymer and rear earth or transition metal doped in inorganic crystal or glasses up to now. Since PSHB was observed by two Russian groups (Gorokhovskii et al. and Kharlamov et al.) for free base phthalocyanine in a n-octane Shpol'skii matrix1 and for perylene and 9-aminoacridine molecules in glassy ethanol matrix2, PSHB materials are studied primarily for the polymer doped with an organic dye. But such materials can make hole only at very low temperature. Room temperature PSHB phenomena were observed on Sm2+ doped fluoride crystals3-5 and glasses6 recently, however these materials' Гih(inhomogeneous line width)/Гh(homogeneous line width)'s which are the parameters of data multiplicity in PSHB optical memory are an order of unity. For the application of PSHB materials to optical memory, high operating temperature, high Гih/Гh, and rapid reaction rate are wanted. Glass has a superiority on the view point of optical memory application because of its broad inhomogeneous line width and productivity. Our group has discovered room temperature PSHB for Sm2+ in borate glass systems whose Гih/Гh is 24.7 PSHB for rear earth metal in glass matrix has not been studied seriously, yet. It is thought that the study of the relationship between the optical hole and glass structure is necessary.
Summary form only given. Persistent spectral hole burning (PSHB) of rare-earth-doped inorganic materials has attracted much attention in view of application to high-density optical memories. In particular, it seems that the glass materials are advantageous for application in wavelength-selective optical devices, as well as the memory devices, because of their large inhomogeneous linewidth. The wavelength-selective devices are key components in the wavelength-division multiplexing system, which is important for the next-generation optical communication technology. The problem for practical application lies in the fact that PSHB of rare-earth ions in glasses is usually observed only at temperature below 20 K. However, room-temperature PSHB has been observed recently for Sm/sup 2+/-doped crystals and glasses.
For next generation high density optical storage, extensive studies on persistent spectral hole burning (PSHB) have been performed, because they have a large potential for a high density frequency-domain optical data storage. PSHB has been observed at room temperature in Sm-doped crystals and glasses. Among them, glasses are considered to be more favorable than single crystals, due to their wide inhomogeneous line width and easy process for mass production. In the study, we developed a new glass mixture which shows room temperature PSHB with a inhomogeneous line width broadened up to 70 cm/sup -1/. The PSHB was characterized by investigating the time decay pattern of fluorescence and the excitation spectra.
We reported the first observation of room-temperature persistent spectral hole burning in Sm2+-doped fluoride glass in the last conference [1]. Room-temperature hole burning had been also observed in Sm2+-doped crystals [2]. We found considerable differences in the hole-burning characteristics between Sm2+-doped glasses and Sm2+-doped crystals: The burning-laser-intensity dependence is approximately linear, and no antihole is observed around the hole burned in Sm2+-doped glasses [3]. More detailed experimental studies are needed to clarify the mechanism of the hole burning in this glass and to explore more efficient hole-burning systems. In this paper, we report several experimental results related to wavelength dependence of the hole burning process.
Photon gated spectral hole-burning was first observed in a samarium doped crystal, BaFCl:Sm2+ [1]. This material was of interest to the developement of optical memories as the holes were found to be stable to room temperature thermal cycling. Holes could be burnt at liquid helium temperatures but as the temperature was raised the line quickly became homogeneously broadened. The addition of bromine to the melt succeeded in broadening the inhomogeneous linewidths to about 2 nm through substitutional disorder [2] and persistent holes were observed at 77 K [3]. Subsequently, a study of the parameters for spectral hole-burning in a BaFCl0.5Br0.5:Sm2+ crystalline powder was performed [4] and the highest temperature for which persistent hole-burning had been observed was raised to 133 K. Here we report spectral hole-burning at room temperature (figure 1) in a related compound, Sr0.5Mg0.5FCl0.5Br0.5:Sm2+.