In recent years, quantum technology has attracted attention in inertial navigation, especially due to its extreme sensitivity to inertial forces and strong immunity to drifts, which plague conventional sensors. There are multiple groups around the world working on cold atom interferometry aiming to develop high sensitive inertial sensors for very high accuracy autonomous navigation. Recent advancements in micro-fabrication technologies have helped in development of robust and miniaturized atom interferometry based high performance inertial systems. These, in future, will pave way for autonomous satellite inertial navigation sensors based on cold atoms. Here we discuss the achievements towards realizing cold atom inertial sensors and their indomitable role as inertial sensors for future satellites. A detailed survey on the initiatives taken by different space agencies, their achievements and their plans to explore its potential in space are also discussed.
Through the use of a high-flux rubidium beam source with sub-Doppler temperatures in three dimensions, we have demonstrated an inertially sensitive atom interferometer featuring high contrast, low noise, and continuous measurement with high bandwidth. We describe the cold-atom source and the optical design that optimizes interferometer contrast. Finally, we demonstrate useful features enabled by this architecture, such as continuous phase shear readout and rapid reversal of inertial sensitivity. This demonstration may enable future cold-atom sensors that measure with both high sensitivity and high bandwidth.
Cold-atom inertial sensors target several applications in navigation, geoscience and tests of fundamental physics. Reaching high sampling rates and high inertial sensitivities, obtained with long interrogation times, represents a challenge for these applications. We report on the interleaved operation of a cold-atom gyroscope, where 3 atomic clouds are interrogated simultaneously in an atom interferometer featuring a 3.75 Hz sampling rate and an interrogation time of 801 ms. Interleaving improves the inertial sensitivity by efficiently averaging vibration noise, and allows us to perform dynamic rotation measurements in a so-far unexplored range. We demonstrate a stability of
3×10−10 rad.s
−1, which competes with the best stability levels obtained with fiber-optics gyroscopes. Our work validates interleaving as a key concept for future atom-interferometry sensors probing time-varying signals, as in on-board navigation and gravity-gradiometry, searches for dark matter, or gravitational wave detection.