Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Research on optimization schemes about physical layer security of RFID system with multiple antennas

Song Huiying, Gao Yuan-yuan, Sha Nan

Published Jan 1, 2018• 0 citations
Publisher

Abstract

In recent years, Radio Frequency Identification(RFID) serves as a critical technology of "Internet of things" and attracts tremendous attention, and how to guarantee its communication security has become a challenge. Based on the physical layer, this paper does some researches on security performance of a passive RFID system equipped with multiple antennas. The paper adopts the technique of Artificial Noise(AN) and puts forward two different safety optimization schemes called "power minimization scheme" and "Signal to Interference and Noise Ratio(SINR) maximization scheme", and two related "null space schemes" are proposed. Then using the mathematical method called semi-definite relaxation and convex optimization to optimize those schemes,simulations proves that security performance of the schemes that adopt AN are better than that without using AN, and achieve the purpose of power saving and SINR maximizing as well. The works really make a great impact on the power limited and cost constrained RFID systems.

DOI
10.16157/j.issn.0258-7998.171201

Related papers

On the physical layer security of backscatter RFID systems

Walid Saad, Zhu Han, H. Vincent Poor

Securing radio frequency identification (RFID) systems against malicious attacks such as eavesdropping is a highly challenging task due to the resource constrained nature of such systems. In fact, the modest computational and storage capabilities of RFID tags makes it impossible to adopt classical cryptographic techniques. While existing work has mostly focused on lightweight cryptographic techniques, in this paper, the first analysis on the adoption of physical layer security techniques in an RFID system is presented. First, the secrecy rate of ultra high frequency (UHF) RFID backscatter systems is characterized. Then, a novel approach is proposed for maximizing this secrecy rate by exploiting the nature and features of the RFID backscatter channel. To explore these features, the proposed approach allows the RFID readers to append artificial noise signals to their continuous wave (CW) signals which then propagate via the backscatter channel hence inducing interference at the eavesdroppers. For enabling the readers to optimally allocate power between their CW signals and artificial noise, a noncooperative game is formulated using which the readers can decide on their optimal power allocations so as to maximize their overall secrecy rates, given the ensuing inter-reader interference. For solving this game, a best response algorithm is proposed using which the readers can reach a Nash equilibrium. Simulation results show that the proposed approach yields significant performance gains, in terms of the average secrecy rate per RFID reader, of at least 17% relative to the classical RFID operation.

International Symposium on Wireless Communication Systems•Aug 1, 2012•9 citations

An Effective Method of Improving Security Performance of RFID System Physical Layer

SONG Huiying,GAO Yuanyuan,SHA Nan

The information in the traditional Radio Frequency Identification(RFID) system during the communication process may be intercepted by malicious users,resulting in the leakage of confidential information.Therefore,a method of improving the security performance of the physical layer of RFID system is proposed.Using security capacity as an evaluation index,two different scenarios are analyzed:When eavesdropper information is known,the security of the communication is ensured through relay selection,which maximizes the security capacity,when the eavesdropper information cannot be known,manual interference is used to reduce the eavesdropper’s ability geting the best power distribution scheme.Simulation results show that this method can greatly improve the system security capacity with minimal interference power.

•May 1, 2018•0 citations

A distinctive method to improve the security capacity of backscatter wireless system

Huiying Song, Yuanyuan Gao, Nan Sha +2 more

Backscatter communication system is the backbone of many low cost and low power distributed wireless systems. This paper studies the physical layer security (PLS) performance of a backscatter system which contains several relays and an eavesdropper. We discuss the conditions for a positive secrecy rate of the system in two different situations. First, in the case of known information of eavesdropper, we use a sub-optimal relay selection method to secure backscatter communication and maximize the secrecy rate. The simulation results prove the suboptimal scheme with low complexity achieves the same effects as the optimal one. But the transmission rate is very low due to the difference between the main channel and eavesdropper channel is too little, so we put forward the second distinctive method. Second, without knowing any information of eavesdropper, we adopt the artificial noise (AN) technique to reduce the received signal to interference noise (SINR) of eavesdropper, and came to a conclusion that under the condition of the same system model, adding a weak AN greatly improves the secrecy rate compared to situation one, and it doesn't required to obtain any information of eavesdropper. In small power of this type of communication system, this method is also effective.

IEEE Advanced Information Technology, Electronic and Automation Control Conference (IAEAC)•Mar 1, 2017•11 citations

Safeguarding RFID Wireless Communication Against Proactive Eavesdropping

Zhao Bing-qing, Hui‐Ming Wang, Peng Liu

Passive radio-frequency identification (RFID) communication raises new transmission secrecy protection challenges, since passive tags stored information lack effective information protection mechanisms. Due to constraints of passive tags, such as limited computation and storage capabilities, security solutions based on the physical-layer security (PLS) are promising candidates compared to those based on conventional lightweight cryptography. Unlike existing endeavors on PLS of RFID wireless communication, we consider an RFID system in the presence of a special proactive eavesdropper, which is able to both enhance the information wiretap and interfere with the information detection at the RFID reader simultaneously by broadcasting its own continuous-wave (CW) signal. To defend against proactive eavesdropping attacks, we propose a wiretap-channel-conscious artificial-noise (AN)-aided secure transmission scheme for the RFID reader, which first estimates both legitimate and wiretap channels and then superimposes an AN signal on the CW signal to confuse the proactive eavesdropper. The transmit power and power allocation between the AN signal and the CW signal are optimized to maximize the secrecy rate. Furthermore, we model the attack and defense process between the proactive eavesdropper and the RFID reader as a hierarchical security game and prove it can achieve the equilibrium. The simulation results show the superiority of our proposed scheme in terms of the secrecy rate and the interactions between the RFID reader and the proactive eavesdropper.

IEEE Internet of Things Journal•Jun 1, 2020•29 citations

Physical Layer Security via MRT Beamforming with Null-Space Artificial Noise in 4-Antenna MISO Wiretap Channels

Mukesh Jangid, Pramod Sharma

Wireless communication is susceptible to interception due to open nature of radio medium. Traditional security relying on cryptographic encryption at higher layers faces difficulties in key management and high computational overhead for resource constrained Internet of Things devices. Physical layer security has recently emerged as alternative paradigm that exploits randomness of wireless propagation to achieve confidentiality without secret keys. This Paper investigates artificial noise aided precoding technique for enhancing secrecy in multiple antenna wiretap channel. The considered network consists of source Alice equipped with multiple antennas, legitimate destination Bob and passive eavesdropper Eve. Alice employs maximum ratio transmission to focus confidential signal towards Bob while simultaneously radiating artificial noise confined to null subspace of legitimate channel matrix. Such construction ensures that intended receiver remains unaffected by noise while eavesdropper experiences additional interference due to independent channel statistics. Sharing of total power between data and noise is optimized to maximize achievable secrecy throughput. Performance evaluation is carried out through Monte Carlo simulation in Rayleigh fading environment. Metrics such as average secrecy rate, outage probability and bit error rate are examined versus signal to noise ratio, power sharing coefficient and number of transmit antennas. Obtained results demonstrate that noise injection improves secrecy throughput by more than 150 percent compared to conventional transmission without noise at 20 dB signal to noise ratio. Optimal power sharing is observed around 0.7, indicating 70 percent power for data and 30 percent for noise.

International Journal for Research Trends and Innovation•Jun 1, 2026•0 citations

Robust artificial noise aided transmit designs for physical layer security

Tang Yanqun, Wei Jibo, Zhang Xiaoying +1 more

For the cases of imperfect channel state information (CSI) on the main channel in the physical-layer-security communications, we study the artificial-noise-aided robust transmit designs. We consider two optimization problems for the multi-input single-output single-antenna eavesdropper (MISOSE) and multi-input multi-output multi-antenna eavesdropper (MIMOME) systems. Under the deterministic uncertainty model (DM), the optimization problem aims to minimize the total transmit power while guaranteeing the probabilistic constraint for the signal to interference and noise ratios (SINR) at the eavesdropper, and the SINR constraint at the legitimate receiver. For the stochastic uncertainty model (SM), the optimization problem is also to minimize the total transmit power under the probabilistic constraints for the SINRs at the legitimate receiver and the eavesdropper. These problems are hard to be solved directly. We transform the optimization problems into a single-variable optimization problem with solving a sequence of semidefinite programs. By comparison, we propose another low-complexity method based on the expectation value. Finally, we verify the performance for the proposed robust transmit designs by the simulation results.

National Doctoral Academic Forum on Information and Communications Technology•Jan 1, 2013•0 citations
In recent years, Radio Frequency Identification(RFID) serves as a critical technology of "Internet of things" and attracts tremendous attention, and how to guarantee its communication security has become a challenge. Based on the physical layer, this paper does some researches on security performance of a passive RFID system equipped with multiple antennas. The paper adopts the technique of Artificial Noise(AN) and puts forward two different safety optimization schemes called "power minimization scheme" and "Signal to Interference and Noise Ratio(SINR) maximization scheme", and two related "null space schemes" are proposed. Then using the mathematical method called semi-definite relaxation and convex optimization to optimize those schemes,simulations proves that security performance of the schemes that adopt AN are better than that without using AN, and achieve the purpose of power saving and SINR maximizing as well. The works really make a great impact on the power limited and cost constrained RFID systems.
Securing radio frequency identification (RFID) systems against malicious attacks such as eavesdropping is a highly challenging task due to the resource constrained nature of such systems. In fact, the modest computational and storage capabilities of RFID tags makes it impossible to adopt classical cryptographic techniques. While existing work has mostly focused on lightweight cryptographic techniques, in this paper, the first analysis on the adoption of physical layer security techniques in an RFID system is presented. First, the secrecy rate of ultra high frequency (UHF) RFID backscatter systems is characterized. Then, a novel approach is proposed for maximizing this secrecy rate by exploiting the nature and features of the RFID backscatter channel. To explore these features, the proposed approach allows the RFID readers to append artificial noise signals to their continuous wave (CW) signals which then propagate via the backscatter channel hence inducing interference at the eavesdroppers. For enabling the readers to optimally allocate power between their CW signals and artificial noise, a noncooperative game is formulated using which the readers can decide on their optimal power allocations so as to maximize their overall secrecy rates, given the ensuing inter-reader interference. For solving this game, a best response algorithm is proposed using which the readers can reach a Nash equilibrium. Simulation results show that the proposed approach yields significant performance gains, in terms of the average secrecy rate per RFID reader, of at least 17% relative to the classical RFID operation.
The information in the traditional Radio Frequency Identification(RFID) system during the communication process may be intercepted by malicious users,resulting in the leakage of confidential information.Therefore,a method of improving the security performance of the physical layer of RFID system is proposed.Using security capacity as an evaluation index,two different scenarios are analyzed:When eavesdropper information is known,the security of the communication is ensured through relay selection,which maximizes the security capacity,when the eavesdropper information cannot be known,manual interference is used to reduce the eavesdropper’s ability geting the best power distribution scheme.Simulation results show that this method can greatly improve the system security capacity with minimal interference power.
Backscatter communication system is the backbone of many low cost and low power distributed wireless systems. This paper studies the physical layer security (PLS) performance of a backscatter system which contains several relays and an eavesdropper. We discuss the conditions for a positive secrecy rate of the system in two different situations. First, in the case of known information of eavesdropper, we use a sub-optimal relay selection method to secure backscatter communication and maximize the secrecy rate. The simulation results prove the suboptimal scheme with low complexity achieves the same effects as the optimal one. But the transmission rate is very low due to the difference between the main channel and eavesdropper channel is too little, so we put forward the second distinctive method. Second, without knowing any information of eavesdropper, we adopt the artificial noise (AN) technique to reduce the received signal to interference noise (SINR) of eavesdropper, and came to a conclusion that under the condition of the same system model, adding a weak AN greatly improves the secrecy rate compared to situation one, and it doesn't required to obtain any information of eavesdropper. In small power of this type of communication system, this method is also effective.
Passive radio-frequency identification (RFID) communication raises new transmission secrecy protection challenges, since passive tags stored information lack effective information protection mechanisms. Due to constraints of passive tags, such as limited computation and storage capabilities, security solutions based on the physical-layer security (PLS) are promising candidates compared to those based on conventional lightweight cryptography. Unlike existing endeavors on PLS of RFID wireless communication, we consider an RFID system in the presence of a special proactive eavesdropper, which is able to both enhance the information wiretap and interfere with the information detection at the RFID reader simultaneously by broadcasting its own continuous-wave (CW) signal. To defend against proactive eavesdropping attacks, we propose a wiretap-channel-conscious artificial-noise (AN)-aided secure transmission scheme for the RFID reader, which first estimates both legitimate and wiretap channels and then superimposes an AN signal on the CW signal to confuse the proactive eavesdropper. The transmit power and power allocation between the AN signal and the CW signal are optimized to maximize the secrecy rate. Furthermore, we model the attack and defense process between the proactive eavesdropper and the RFID reader as a hierarchical security game and prove it can achieve the equilibrium. The simulation results show the superiority of our proposed scheme in terms of the secrecy rate and the interactions between the RFID reader and the proactive eavesdropper.
Wireless communication is susceptible to interception due to open nature of radio medium. Traditional security relying on cryptographic encryption at higher layers faces difficulties in key management and high computational overhead for resource constrained Internet of Things devices. Physical layer security has recently emerged as alternative paradigm that exploits randomness of wireless propagation to achieve confidentiality without secret keys. This Paper investigates artificial noise aided precoding technique for enhancing secrecy in multiple antenna wiretap channel. The considered network consists of source Alice equipped with multiple antennas, legitimate destination Bob and passive eavesdropper Eve. Alice employs maximum ratio transmission to focus confidential signal towards Bob while simultaneously radiating artificial noise confined to null subspace of legitimate channel matrix. Such construction ensures that intended receiver remains unaffected by noise while eavesdropper experiences additional interference due to independent channel statistics. Sharing of total power between data and noise is optimized to maximize achievable secrecy throughput. Performance evaluation is carried out through Monte Carlo simulation in Rayleigh fading environment. Metrics such as average secrecy rate, outage probability and bit error rate are examined versus signal to noise ratio, power sharing coefficient and number of transmit antennas. Obtained results demonstrate that noise injection improves secrecy throughput by more than 150 percent compared to conventional transmission without noise at 20 dB signal to noise ratio. Optimal power sharing is observed around 0.7, indicating 70 percent power for data and 30 percent for noise.
For the cases of imperfect channel state information (CSI) on the main channel in the physical-layer-security communications, we study the artificial-noise-aided robust transmit designs. We consider two optimization problems for the multi-input single-output single-antenna eavesdropper (MISOSE) and multi-input multi-output multi-antenna eavesdropper (MIMOME) systems. Under the deterministic uncertainty model (DM), the optimization problem aims to minimize the total transmit power while guaranteeing the probabilistic constraint for the signal to interference and noise ratios (SINR) at the eavesdropper, and the SINR constraint at the legitimate receiver. For the stochastic uncertainty model (SM), the optimization problem is also to minimize the total transmit power under the probabilistic constraints for the SINRs at the legitimate receiver and the eavesdropper. These problems are hard to be solved directly. We transform the optimization problems into a single-variable optimization problem with solving a sequence of semidefinite programs. By comparison, we propose another low-complexity method based on the expectation value. Finally, we verify the performance for the proposed robust transmit designs by the simulation results.