Sensors

Constructing Grith Eight GC-LDPC Codes Based on the GCD FLRM Matrix with a New Lower Bound

Kun Zhu, Hongwen Yang

Published Sep 27, 2022• 8 citations

Abstract

By connecting multiple short, local low-density parity-check (LDPC) codes with a global parity check, the globally coupled (GC) LDPC code can attain high performances with low complexities. The typical design of a local code is a quasi-cyclic (QC) LDPC for which the code length is proportional to the size of circulant permutation matrix (CPM). The greatest common divisor (GCD)-based full-length row multiplier (FLRM) matrix is constrained by a lower bound of CPM size to avoid six length cycles. In this paper, we find a new lower bound for the CPM size and propose an algorithm to determine the minimum CPM size and the corresponding FLRM matrix. Based on the new lower bound, two methods are proposed to construct the GC-QC-LDPC code of grith 8 based on the GCD based FLRM matrix. With the proposed algorithm, the CPM size can be 45% less than that given by sufficient condition of girth 8. Compared with the conventional GC-LDPC construction, the codes constructed with the proposed method have improved performance and are more flexible in code length and code rate design.

DOI: 10.3390/s22197335

Related papers

Full-Length Row-Multiplier QC-LDPC Codes With Girth Eight and Short Circulant Sizes

Juhua Wang, Jianhua Zhang, Quan Zhou +1 more

As a special case of a quasi-cyclic (QC) low-density parity-check (LDPC) code, a full-length row-multiplier (FLRM) QC-LDPC code is described by a compact exponent matrix based on two sequences of integers. The codes designed by a framework known as greatest-common-divisor (GCD) method, belong to a salient class of FLRM QC-LDPC codes, which can eliminate cycles of length up to six by carefully selecting a special sequence subject to a set of simple inequalities. However, the GCD method ensures the absence of these cycles only if circulant sizes are larger than a certain threshold. By combining the existing GCD method, novel sequences and a new analysis method (based on new lemmas of circulants and integers) for modulo equations, a group of novel FLRM QC-LDPC codes free of 4-cycles and 6-cycles are explicitly proposed for column weights from three to five in this paper, which possess circulant sizes much smaller than the forgoing threshold. Simulations show that the new FLRM QC-LDPC codes with shorter lengths perform almost the same as the existing FLRM QC-LDPC codes with longer lengths, and that the novel FLRM QC-LDPC codes noticeably outperform their counterparts with (nearly) identical lengths.

IEEE AccessJan 1, 202310 citations

Construction of Girth-Eight QC-LDPC Codes from Greatest Common Divisor

Guohua Zhang, Rong Xia Sun, Xinmei Wang

For any column weight J and any row weight L, a novel framework is proposed such that a girth-eight (J,L) quasi-cyclic low-density parity-check (QC-LDPC) code with any block length above a lower bound can be constructed via a simple inequality in terms of greatest common divisor (GCD). The main advantage is that the construction of a class of (J,L) girth-eight QC-LDPC codes is transformed into a rather simple task, searching for J integers satisfying the so-called GCD constraint for L. Combining the new method with masking matrices, a class of type-1 QC-LDPC codes is presented with girth at least eight. Simulation results show that the type-1 codes perform better than the random QC-LDPC codes and quadratic-congruence-based QC-LDPC codes for moderate block lengths and low code rates.

IEEE Communications LettersJan 2, 201347 citations

Automatic Verification of GCD Constraint for Construction of Girth-Eight QC-LDPC Codes

Guohua Zhang, Yi Fang, Yuanhua Liu

As a general method to yield constructions for quasi-cyclic (QC) low-density parity-check (LDPC) codes with girth eight, the greatest-common-divisor (GCD) framework heavily relies on verifying a type of inequalities, referred to as GCD constraints. An algorithm is developed in this letter to automatically verify GCD constraints without conducting any manual analysis, by bounding from above the GCD of a fixed integer and an integer in the form of linear function. As an application of the algorithm, a set of novel constructions based on GCD framework is proposed. From these new constructions, four novel bounds on the size of circulant permutation matrices (CPMs) are formulated, such that girth-eight QC-LDPC codes always exist for any CPM size greater than or equal to the bounds. The new bound for column weight of 6 slightly improves the existing best one, and those for column weights from 7 to 9 significantly strengthen the state-of-the-art ones by decreasing from essentially a cubic or biquadratic power of row weight to a quadratic power of row weight.

IEEE Communications LettersJun 28, 201911 citations

Quasi-Cyclic Spatially Coupled LDPC Codes Construction with Girth Eight

Shikui Guo, Guohua Zhang

Small cycles in spatially coupled low-density paritycheck (SC-LDPC) codes have a detrimental effect on the error floor. Recently, an explicit simple method has been proposed to construct a class of 4-cycle free SC-LDPC codes by partitioning a spreading matrix into a number of component matrices. Using a quasi-cyclic (QC) lifting, we propose a component matrices construction method to obtain QC-SC-LDPC codes with a girth eight in this paper. The component matrices of the new method are completely defined by a spreading matrix and an exponent matrix. The spreading matrix is constructed from a finite sequence of integers, and the exponent matrix is constructed from the greatest common divisor (GCD) framework. The novel construction method demonstrates the capacity to entirely eliminate 6-cycles. Compared to the recently proposed explicit structural design, the proposed code achieves a girth of eight and exhibits better bit-error rate (BER) performance.

IEEE/CIC International Conference on Communications in China (ICCC)Aug 10, 20250 citations

New Construction of QC-LDPC Codes Based on Full-Length Row-Multiplier

Ke Jia, Yu Qin, Mei Li

This paper proposes a new explicit construction method for quasi-cyclic (QC) low-density parity-check (LDPC) codes without 4-cycles and 6-cycles with large column weights. Two integer sequences entirely define the exponent matrix of the new method. The first sequence is an arithmetic sequence starting from 0 with a tolerance of 1, and the second sequence is a special sequence composed of integers that meet the constraint of the greatest common divisor (GCD). The existing explicit method can only provide a variety of row weight types with large circulant size. Compared with the recently proposed symmetric structure method based on computer search, the new explicit construction method has better decoding performance, extremely low description complexity, and does not require computer search.

IEEE International Conference on Communication Technology (ICCT)Oct 18, 20240 citations

Design and performance evaluation of low complexity encoding methods for LDPC codes

Ambar Bajpai, Lunchakorn Wuttisittikulkij, Piya Kovintavewat

There is an important breakthrough in the field of forward error correction techniques, low-density parity-check (LDPC) codes. These codes have potential to approach the Shannon limit with reliable performance on a given channel, known as the channel capacity. Recently, researchers pay much more attention towards LDPC codes because its performance is better than Turbo codes. However, the LDPC code is the best when it is an irregular code and uses with a very large block-length. Although, the short block-length LDPC codes perform not so well, they are easy to implement in various practical applications. Therefore, there is still a demand of new development on the encoding side of LDPC codes for various ranges of code rate and code length so as to capable of using in many applications.This thesis proposes the development of quasi-cyclic (QC) LDPC codes for column weight 3. In the first part of this thesis, we propose a new construction algorithm of QC-LDPC codes for medium to large block-length by combining QC-LDPC codes of small block-length as their component codes, via Chinese remainder theorem (CRT). Such component codes were constructed by permuting each column block sequentially to attain the desire local girth. After combining all component codes to generate an expanded parity-check matrix, the resulting girth is greater than or at least equal to the maximum girth of the component codes. Simulation results show that our proposed construction method of the parity-check matrix significantly outperforms the other well-known existing methods in terms of low error-floor, simple structure, high performance, and can reduce encoding complexity.In addition, this thesis also proposes two new construction methods for QC-LDPC codes, namely a base matrix method and a subtraction based method. A base matrix based method is a simple, less computational complexity method for constructing the exponent matrix (3, K) of girth 8, 10 and 12 of QC-LDPC codes. Another method is a subtraction method, which has a similar exponent matrix as a base matrix method and has a girth at least 8. Results indicate that the LDPC codes constructed from these two methods have flexibility for arbitrary block-column length K and have a similar BER performance if compared to existing methods.

Jan 1, 20150 citations