Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Bi-directional superluminal ring lasers without crosstalk and gain competition

Zifan Zhou, Ruoxi Zhu, Nicholas J. Condon, Devin J. Hileman, Jason Bonacum, M. S. Shahriar

Published Jun 20, 2022• 4 citations
Publisher

Abstract

In this paper, we present the experimental observation of simultaneous bi-directional superluminal lasing in a triangular ring cavity without gain competition and crosstalk as needed for realizing a gyroscope based on the Sagnac effect. The gain spectrum for each of the lasers is tailored to be a narrow dip on top of a broad gain using two stable isotopes of Rb. Specifically, we make use of 85Rb to produce a broad gain spectrum via the optically pumped Raman gain process and 87Rb to produce a narrow absorption spectrum via the optically pump Raman depletion process. A separate gain cell is used for the laser in each direction. Inferred from the simulation, the spectral sensitivity enhancements of the clock-wise and counter-clock-wise superluminal ring lasers are ∼362 and ∼505, respectively, with the imbalance attributed to differences in pump powers.

DOI
10.1063/5.0093164

Related papers

Realization of Bi-directional Superluminal Ring Lasers Using Adjacent Transitions in Two Isotopes of Rubidium

Zifan Zhou, Nicholas J. Condon, Devin J. Hileman +2 more

We present the experimental realization of simultaneous bi-directional superluminal lasing in a triangular ring cavity. The sensitivity enhancements of the superluminal ring lasers, inferred from simulation, are 505 and 362 at the two-photon resonance frequency.

Frontiers in Optics•Jan 1, 2021•1 citation

Electromagnetically induced transparency in Raman gain for realizing a superluminal ring laser

Yael Sternfeld, Zifan Zhou, Jacob Scheuer +1 more

We describe an approach for realizing a superluminal ring laser using a single isotope of Rb vapor by producing electromagnetically induced transparency (EIT) in Raman gain. We show that by modifying the detuning and the intensity of the optical pump field used for generating the two-photon population inversion needed for generating Raman gain, it is possible to generate a dip in the center of the gain profile that can be tuned to produce a vanishingly small group index, as needed for making the Raman laser superluminal. We show that two such lasers, employing two different vapor cells, can be realized simultaneously, operating in counter-propagating directions in the same cavity, as needed for realizing a superluminal ring laser gyroscope. This technique, employing only one isotope, is much simpler than the earlier, alternative approach for realizing a superluminal Raman laser based on Raman gain and Raman dip in two isotopes [Zhou et. al, Opt. Express27, 29738 (2019)10.1364/OE.27.029738]. We present both an approximate theoretical model based on four levels as well as the results of a model that takes into account all relevant hyperfine states corresponding to the D1 and D2 transitions in 85Rb atom. We also present experimental results, in good agreement with the theoretical model, to validate the approach.

Optics Express•Nov 26, 2020•16 citations

Observation of a highly superluminal laser employing optically pumped Raman gain and depletion

Zifan Zhou, Nicholas Condon, Devin Hileman +1 more

In this paper, we report a Raman laser which is extremely sensitive to a variation of the cavity length, using a scheme employing two stable isotopes of Rb. One isotope is used for producing a broad gain spectrum via the optically pumped Raman gain process, while the other is used for producing a narrow dip via the optically pumped Raman depletion process. By tuning the frequencies of the two Raman pumps, the center frequencies of the gain and dip can be aligned to the same frequency. This approach allows tuning of the gain and dip parameters independently over a broad range of operating conditions. With such a configuration, we can produce a negative dispersion around the two-photon resonance frequency in the vapor cell, which leads to a group index that is close to zero. By theoretically matching the experimental observations, we can infer that the sensitivity of such laser is enhanced by a factor of more than 2800, which is nearly a factor of three larger than the highest value reported previously using a different approach.

Optics Express•Feb 3, 2022•6 citations

Single-pumped gain profile for a superluminal ring laser

Yael Sternfeld, Zifan Zhou, M. S. Shahriar +1 more

We present an approach for realizing a superluminal ring laser using a single isotope of atomic Rb vapor by producing electromagnetically induced transparency (EIT) in self-pumped Raman gain. Only a single pump laser is used for generating a Raman gain profile containing a dip at its center. The position and depth of this dip can be tuned by adjusting the intensity of the pump laser, allowing for optimizing the degree of enhancement in sensitivity within a certain operating range. This approach represents a significant simplification of the design of superluminal lasers compared to the approaches demonstrated in previous studies. We demonstrate experimentally the realization of this scheme using transitions within the D1 and the D2 manifolds of 85 Rb. Numerical simulations based on an approximate model show close agreement with the experimental results.

Optics Express•Oct 3, 2023•3 citations

Superluminal Raman laser with enhanced cavity length sensitivity

Zifan Zhou, Minchuan Zhou, M. S. Shahriar

We demonstrate experimentally a superluminal ring laser based on optically pumped Raman gain, and a self-pumped Raman depletion for producing anomalous dispersion, employing two isotopes of rubidium. By fitting the experiment data with the theoretical model, we infer that the spectral sensitivity of the superluminal Raman laser to cavity length change is enhanced by a factor of more than a thousand, compared to a conventional laser.

Optics Express•Oct 1, 2019•17 citations

Double-Raman Gain for Realizing a Superluminal Ring Laser

Yu-Hong Wang, Tony Abi-Salloum, J. Yablon +3 more

We show how a dual-peak gain produced via optical pumping and non-degenerate Raman pumps in a single vapor cell can be used to realize a superluminal ring laser with enhanced sensitivity for gyroscopy and accelerometry.

•Jan 1, 2013•0 citations
In this paper, we present the experimental observation of simultaneous bi-directional superluminal lasing in a triangular ring cavity without gain competition and crosstalk as needed for realizing a gyroscope based on the Sagnac effect. The gain spectrum for each of the lasers is tailored to be a narrow dip on top of a broad gain using two stable isotopes of Rb. Specifically, we make use of 85Rb to produce a broad gain spectrum via the optically pumped Raman gain process and 87Rb to produce a narrow absorption spectrum via the optically pump Raman depletion process. A separate gain cell is used for the laser in each direction. Inferred from the simulation, the spectral sensitivity enhancements of the clock-wise and counter-clock-wise superluminal ring lasers are ∼362 and ∼505, respectively, with the imbalance attributed to differences in pump powers.
We describe an approach for realizing a superluminal ring laser using a single isotope of Rb vapor by producing electromagnetically induced transparency (EIT) in Raman gain. We show that by modifying the detuning and the intensity of the optical pump field used for generating the two-photon population inversion needed for generating Raman gain, it is possible to generate a dip in the center of the gain profile that can be tuned to produce a vanishingly small group index, as needed for making the Raman laser superluminal. We show that two such lasers, employing two different vapor cells, can be realized simultaneously, operating in counter-propagating directions in the same cavity, as needed for realizing a superluminal ring laser gyroscope. This technique, employing only one isotope, is much simpler than the earlier, alternative approach for realizing a superluminal Raman laser based on Raman gain and Raman dip in two isotopes [Zhou et. al, Opt. Express27, 29738 (2019)10.1364/OE.27.029738]. We present both an approximate theoretical model based on four levels as well as the results of a model that takes into account all relevant hyperfine states corresponding to the D1 and D2 transitions in 85Rb atom. We also present experimental results, in good agreement with the theoretical model, to validate the approach.
In this paper, we report a Raman laser which is extremely sensitive to a variation of the cavity length, using a scheme employing two stable isotopes of Rb. One isotope is used for producing a broad gain spectrum via the optically pumped Raman gain process, while the other is used for producing a narrow dip via the optically pumped Raman depletion process. By tuning the frequencies of the two Raman pumps, the center frequencies of the gain and dip can be aligned to the same frequency. This approach allows tuning of the gain and dip parameters independently over a broad range of operating conditions. With such a configuration, we can produce a negative dispersion around the two-photon resonance frequency in the vapor cell, which leads to a group index that is close to zero. By theoretically matching the experimental observations, we can infer that the sensitivity of such laser is enhanced by a factor of more than 2800, which is nearly a factor of three larger than the highest value reported previously using a different approach.
We present an approach for realizing a superluminal ring laser using a single isotope of atomic Rb vapor by producing electromagnetically induced transparency (EIT) in self-pumped Raman gain. Only a single pump laser is used for generating a Raman gain profile containing a dip at its center. The position and depth of this dip can be tuned by adjusting the intensity of the pump laser, allowing for optimizing the degree of enhancement in sensitivity within a certain operating range. This approach represents a significant simplification of the design of superluminal lasers compared to the approaches demonstrated in previous studies. We demonstrate experimentally the realization of this scheme using transitions within the D1 and the D2 manifolds of 85 Rb. Numerical simulations based on an approximate model show close agreement with the experimental results.