In the last chapter, we examined the effect of cubic nonlinearity on selfrefraction of an optical beam. We have also seen that the presence of a quadratic nonlinearity can also contribute to change in the profile of a Gaussian beam in a crystal. In this chapter we will see how the effect of nonlinearity, alongwith the proper feedback, can give rise to optical bistability and hysteresis. This is not unexpected as hysteresis and bistability are also observed in nonlinear electronic circuits with feedback, such as in the Schmitt trigger, as well as in hybrid optical devices, such as an acoustooptic device with feedback (Banerjee and Poon, 1991). In what follows, we will examine two different types of optically bistable devices based on optical nonlinearities. The first is a nonlinear ring resonator comprising a two-level gain medium as the nonlinear element. We will treat both absorptive and dispersive bistability. Absorptive bistability is the case when the incident optical frequency is close to or equal to the transition frequency of the atoms from one level to another. In this case, the absorption coefficient becomes a nonlinear function of the incident intensity. On the other hand, if the frequencies are far apart, the medium behaves like a Kerr-type material and the system exhibits what is called dispersive bistability. In this case the material can be modeled by an effective n2 or v (3), meaning that the refractive index becomes a nonlinear function of the optical intensity. The second configurationwewill examine is a linear-nonlinear interface. In this case, the interface provides the feedback due to refractive index mismatch. In fact, the reflection coefficient (as well as the transmission coefficient) is modified due to the nonlinearity, which, as we shall see later, is responsible for demonstrating optical switching and bistability.
In the last chapter, we examined the effect of cubic nonlinearity on selfrefraction of an optical beam. We have also seen that the presence of a quadratic nonlinearity can also contribute to change in the profile of a Gaussian beam in a crystal. In this chapter we will see how the effect of nonlinearity, alongwith the proper feedback, can give rise to optical bistability and hysteresis. This is not unexpected as hysteresis and bistability are also observed in nonlinear electronic circuits with feedback, such as in the Schmitt trigger, as well as in hybrid optical devices, such as an acoustooptic device with feedback (Banerjee and Poon, 1991). In what follows, we will examine two different types of optically bistable devices based on optical nonlinearities. The first is a nonlinear ring resonator comprising a two-level gain medium as the nonlinear element. We will treat both absorptive and dispersive bistability. Absorptive bistability is the case when the incident optical frequency is close to or equal to the transition frequency of the atoms from one level to another. In this case, the absorption coefficient becomes a nonlinear function of the incident intensity. On the other hand, if the frequencies are far apart, the medium behaves like a Kerr-type material and the system exhibits what is called dispersive bistability. In this case the material can be modeled by an effective n2 or v (3), meaning that the refractive index becomes a nonlinear function of the optical intensity. The second configurationwewill examine is a linear-nonlinear interface. In this case, the interface provides the feedback due to refractive index mismatch. In fact, the reflection coefficient (as well as the transmission coefficient) is modified due to the nonlinearity, which, as we shall see later, is responsible for demonstrating optical switching and bistability.
In Chapter 9 we discussed the case of a nonlinear cavity containing an active medium. In this framework, the outstanding phenomenon which arises is laser emission, and we calculated the stationary solutions for the ring laser. In this chapter, instead, we turn our attention to the passive nonlinear cavity and in this framework the outstanding phenomenon is optical bistability , i.e. the existence of two distinct stable stationary states that coexist for the same fixed values of the parameters in play. This phenomenon can arise also in the case of an active system contained in a cavity, as we have already noted in Section 9.1 and as we will discuss further in connection with the laser with injected signal, but it became popular from the studies of nonlinear passive optical cavities in the 1970s and 1980s. In contrast to the laser case, in the passive configuration we use an input coherent field, which is injected into the cavity. We discussed this case in Chapter 8 and derived a general equation for the transmission of the cavity (Eq. (8.23)), which we used for an empty cavity and for a linear cavity in Sections 8.4 and 8.5, respectively. In this chapter we will discuss the full nonlinear configuration. It is customary to identify two extreme cases of optical bistability called absorptive optical bistability and dispersive or refractive optical bistability . In both cases an essential ingredient to obtain the bistable behavior is the feedback action exerted by the mirrors of the cavity. In the purely absorptive configuration, in which there is exact resonance among the frequencies of the input field, of the atoms and of the cavity, the other essential ingredient is the saturable nonlinearity of the absorption. In the dispersive case, instead, the main feature is the nonlinearity of the refractive index. These two cases will be illustrated in Sections 11.1 and 11.2, respectively, both “exactly” and in the low-transmission limit.
When the output parameter of an optical device could be a multivalued function of the input parameter, this device can be working in an optical bistable status. The most typical optical bistable device is a Fabry–Perot cavity containing a nonlinear optical medium, the refractive index of which depends on the light intensity. Upon the action of an intense input optical beam, the transmitted (or reflected) intensity of this device may exhibit a nonlinear response to the incident light intensity variation and, especially under appropriate working conditions, the characteristic output/input curve may manifest a single (or multiple) hysteresis loop(s). Such type of optical bistable device can be used as an optical differential amplifier, optical switch, optical limiter, optical clipper, optical discriminator, or an optical memory element, depending on the chosen nonlinear medium and operation conditions.
In the previous chapter we examined nonlinear propagation in a two-level medium, which leads to amplification or absorption of the radiation field. As we will see further on in this volume, when the medium is placed in an optical cavity one realizes a laser in the case of amplification or an optically bistable system in the absorptive configuration. On the other hand, the nonlinear response of the atomic polarization to the electric field leads to further fascinating scenarios [29, 51–60]. For example, a field with central ω 0 can generate harmonic components with central frequencies 2 ω 0 , 3 ω 0 etc., processes that are called second-harmonic generation, third-harmonic generation etc. Furthermore, the interaction of two fields with central frequencies ω 1 and ω 2 , with ω 1 > ω 2 , can generate components with central frequency ω 1 + ω 2 (sum-frequency generation) and ω 1 − ω 2 (difference-frequency generation). Such phenomena have not yet appeared in this volume because we have assumed that the electric field corresponds to a narrow frequency band around a central frequency ω 0 only, whereas to describe them it is necessary to assume that the electric field is the superposition of a number of frequency bands. In this chapter we will provide a description of the basic elements which are necessary to describe these phenomena and we will discuss a small number of them for the case of materials with a quadratic nonlinearity, referring to textbooks in nonlinear optics for the description of other phenomena. The following chapter is devoted, instead, to the case of materials with cubic nonlinearities. The starting point of nonlinear optics is the expansion of the atomic polarization in powers of the electric field, when the electric field is not too intense. In our treatment in Chapter 5 we saw that the expansion of the nonlinear susceptibility contains only even powers of the electric field (see Eq. (5.27)), and therefore the expansion of the polarization includes only odd powers.
We experimentally demonstrate a fundamentally new type of intrinsic optical bistability that requires no resonant optical cavity. Operation is based on mutual self-focusing of counterpropagating laser beams in a nonlinear medium. We propose and experimentally demonstrate a fundamentally new type of optical bistability. 1 The operation of this new class of devices is based on self-focusing of light; the feedback required for bistability is provided by an apertured retroreflector. These devices exhibit intrinsic bistability (the feedback is optical) and are related to nonlinear waveguide devices proposed earlier. 2 Self-focusing occurs when a light beam having a nonuniform spatial profile (such as a Gaussian laser beam) and sufficient intensity propagates through a nonlinear medium having an intensity-dependent index of refraction. 3 Previously proposed devices that exhibited
Nonlinear optics is the study of the response of dielectric media to strong optical fields. The fields are sufficiently strong that the response of the medium is, as its name implies, nonlinear. That is, the polarization, which is the dipole moment per unit volume in the medium, is not a linear function of the applied electric field. In the equation for the polarization, there is a linear term, but, in addition, there are terms containing higher powers of the electric field. This leads to significant new types of behavior, one of the most notable being that frequencies different from that of the incident electromagnetic wave, such as harmonics or subharmonics, can be generated. Linear media do not change the frequency of light incident upon them. The first observation of a nonlinear optical effect was, in fact, second-harmonic generation – a laser beam entering a nonlinear medium produced a second beam at twice the frequency of the original. Another type of behavior that becomes possible in nonlinear media is that the index of refraction, rather than being a constant, is a function of the intensity of the light. For a light beam with a nonuniform intensity profile, this can lead to self-focusing of the beam. Most nonlinear optical effects can be described using classical electromagnetic fields, and, in fact, the initial theory of nonlinear optics was formulated assuming the fields were classical. When the fields are quantized, however, a number of new effects emerge. Quantized fields are necessary if we want to describe fields that originate from spontaneous emission. For example, in a process known as spontaneous parametric down-conversion, a beam of light at one frequency, the pump, produces a beam at half the original frequency, the signal. This second beam is a result of spontaneous emission.