Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)

Atomic beam guide by a one-dimensional magneto-optical trap

R. Ohmukai, S. Urabe, M. Watanbe

Published Jan 20, 2003• 0 citations
Publisher

Abstract

The fine control of a neutral atomic beam by radiation pressure has opened a new field called atom lithography. In particular, a direct writing method, which focuses an atomic beam with a standing-wave light field into narrow lines, has been demonstrated. A velocity-controlled and isotope-selected atomic beam is essential for improving the performance of this lithography method. An atomic deflection technique using radiation pressure is indispensable for producing such an atomic beam. Here we report on an atomic beam guide using a one-dimensional magneto-optical trap (1D-MOT). First we decelerate atoms whose velocities lie in the range between 250 and 320 m/s. A diode laser (780 nm) is used as the light source for deceleration and its injection current is modulated at 2 MHz. Then the decelerated beam is deflected by a tilted 1D-MOT, which consists of four copper rods and four rectangular mirrors.

DOI
10.1109/cleopr.1999.811401

Related papers

Laser Cooling and Bose-Einstein Condensation. Atomic Beam Guide and Channeling toward Atom Lithography.

R. Ohmukai, Shinji Urabe, Masayoshi Watanabe

An atomic beam has been collimated, compressed, and deflected simultaneously by an atomic beam guide based on an tilted one-dimensional magneto-optical trap. Isotope-selected rubidium atoms were extracted from the naturally-mixed thermal atomic beam. We could extract more than 50% of the incident atoms as a deflection beam when we combined this deflection technique with the atomic deceleration using a broadband spectral light. We could manipulate the transverse displacement of the deflected beam precisely by modifying the quadrupole magnetic field. We also observed the well-collimated atomic beam to be channeled into the dipole force potential valleys formed by the standing wave light field.

The Review of Laser Engineering•Jan 1, 2000•0 citations

Calcium magneto-optical trap loaded from a decelerated atomic beam

Reinaldo L. Cavasso Filho, Daniela A. Manoel, Davi R. Ortega +3 more

We describe a new system for laser cooling and trapping of neutral Calcium atoms employing the ¹S0 -¹ P1 resonant transition at 423 nm. An on-axis magneto-optical trap (MOT) is loaded from a Zeeman decelerated atomic beam. When a single laser is used, in order to avoid perturbation of the trap by the deceleration laser beam, this one has been tightly focused near the MOT center, with a waist size much smaller than the atomic cloud. In order to test the efficiency of this novel technique, we have then employed a second, independent decelerating laser, with a profile mode matched to the atomic beam. For an oven temperature of 580±C this system can load 1.2 (2) x 10(7) atoms in 16 (1) ms. By the spatial extension of the atomic cloud the one dimension rms velocity was estimated to be 136 (12) cm/s, corresponding to a temperature of 9 (2) mK. The variation of the number of trapped atoms as a function of laser detuning and intensity, trap magnetic field gradient and oven temperature is analyzed. Spatial structures of the trapped atoms, like stable rings created by vortex forces, have been observed. This is the first time that these structures, already observed in alkali-metal elements, are reported in MOTs of alkaline-earth elements.

Brazilian Journal of Physics•Jun 1, 2003•3 citations

Slow Atomic Beams Manipulation with Magnetic Videotapes

H. Merimeche

Laser cooling methods provide the possibility to obtain very well collimated and slow atomic beams. These intense sources have attracted new interest in the manipulation of atomic trajectories. Atom optical schemes based on the optical dipole force are very attractive, for example in atom lithography where atomic beams are focused by standing wave light elds, to create periodic nanostructures. However, in applications where more complex structures are desirable or decoherence due to spontaneous emission has to be avoided, magnetic atom optical components are more attractive. For example, at and curved atomic mirrors with high reflectivity and low surface rough ness can be built from periodically magnetized videotapes. First, with a collimated and polarized cesium atomic beam from a Zeeman-slower apparatus, we have investigated the deflection of the atomic beam by a sinusoidally magnetized videotape with a period length of 30 μm. From these measurements we have determined the magnetic eld strength at the surface to be 0.05 Tesla. The reflectivity has been found to be consistent with 100%. The very large eld gradients produced by the tape can be exploited to guide atoms on curved trajectories with small radii of curvature. With a radius of 9.5 cm we have obtained a maximum deflection angle of 25° which is limited by technical constraint. Second, we have built a setup based on a 2D-MOT for generating a slow atomic beam with a velocity of 20 m/s. After leaving the optical collimation and the optical polarization stages, the atomic beam is reflected after one bounce onto the videotape up to angles as large as 7°. We exploited the natural curvature of our videotape and we demonstrated the focusing of the atomic beam after one and two bounces depending on the curvature of the videotape. The focal length and the angles of deflection enable to deduce the local radii of curvature. We have confronted our results by testing the focusing of the videotape with a red laser and by performing a numerical simulation which prove the consistency with the atomic beam experiments.

•Jan 1, 2004•1 citation

Focusing of an atomic beam by a two-dimensional magneto-optical trap

Павел Николаевич Мелентьев, P. A. Borisov, S. N. Rudnev +2 more

A method for focusing neutral atoms based on the light-pressure force in a nonuniform magnetic field is proposed and analyzed. Its particular scheme is realized by means of a two-dimensional magneto-optical trap using a thermal beam of Rb atoms. A feature of this focusing method is the linear dependence of the focal length on the longitudinal velocity of atoms in contrast to the quadratic dependence in the known methods of focusing material-particle beams. The minimum size of the waist of the focused atomic beam is equal to 270 µm. Owing to focusing by means of the two-dimensional magneto-optical trap, the velocity monochromatization of a thermal atomic beam is realized: the width of the distribution of the longitudinal atomic velocities in the beam is reduced from 350 to 60 m/s.

Journal of Experimental and Theoretical Physics Letters•Mar 1, 2006•9 citations

Atom-number amplification in a magneto-optical trap via stimulated light forces

Tara Cubel Liebisch, E. Blanshan, Elizabeth A. Donley +1 more

We decelerated an atomic beam of ${}^{87}$Rb using a stimulated-emission slowing technique that employs a bichromatic standing light wave of high intensity, and increased the atom number in a magneto-optical trap (MOT) of low capture velocity by up to a factor of 14, and the load rate into the MOT by a factor of 20. We performed the slowing over distances under 1.5 cm with 5.2 mW of total power in the bichromatic beams. The average stimulated force was 2.2 times the maximum spontaneous emission force, and could be made even stronger in a smaller apparatus.

Physical Review A•Jan 10, 2012•16 citations

Two-dimensional atomic lithography by submicrometer focusing of atomic beams

Will Williams, Mark E. Saffman

We analyze a method for serial writing of arbitrary two-dimensional patterns using optical focusing of a collimated atomic beam. A spatial light modulator is used in a side illumination geometry to create a localized optical spot with secondary maxima that are well separated from the central peak. Numerical simulation of a lithography experiment using a magneto-optical trap as a source of cold Cs atoms, collimation and cooling in a magnetic guide, and optical focusing predicts FWHM pixel sizes of 110×110 nm and writing times of ∼20 ms/pixel.

arXiv:physics/0506022•Journal of the Optical Society of America B•Jun 1, 2006•9 citations
The fine control of a neutral atomic beam by radiation pressure has opened a new field called atom lithography. In particular, a direct writing method, which focuses an atomic beam with a standing-wave light field into narrow lines, has been demonstrated. A velocity-controlled and isotope-selected atomic beam is essential for improving the performance of this lithography method. An atomic deflection technique using radiation pressure is indispensable for producing such an atomic beam. Here we report on an atomic beam guide using a one-dimensional magneto-optical trap (1D-MOT). First we decelerate atoms whose velocities lie in the range between 250 and 320 m/s. A diode laser (780 nm) is used as the light source for deceleration and its injection current is modulated at 2 MHz. Then the decelerated beam is deflected by a tilted 1D-MOT, which consists of four copper rods and four rectangular mirrors.
An atomic beam has been collimated, compressed, and deflected simultaneously by an atomic beam guide based on an tilted one-dimensional magneto-optical trap. Isotope-selected rubidium atoms were extracted from the naturally-mixed thermal atomic beam. We could extract more than 50% of the incident atoms as a deflection beam when we combined this deflection technique with the atomic deceleration using a broadband spectral light. We could manipulate the transverse displacement of the deflected beam precisely by modifying the quadrupole magnetic field. We also observed the well-collimated atomic beam to be channeled into the dipole force potential valleys formed by the standing wave light field.
We describe a new system for laser cooling and trapping of neutral Calcium atoms employing the ¹S0 -¹ P1 resonant transition at 423 nm. An on-axis magneto-optical trap (MOT) is loaded from a Zeeman decelerated atomic beam. When a single laser is used, in order to avoid perturbation of the trap by the deceleration laser beam, this one has been tightly focused near the MOT center, with a waist size much smaller than the atomic cloud. In order to test the efficiency of this novel technique, we have then employed a second, independent decelerating laser, with a profile mode matched to the atomic beam. For an oven temperature of 580±C this system can load 1.2 (2) x 10(7) atoms in 16 (1) ms. By the spatial extension of the atomic cloud the one dimension rms velocity was estimated to be 136 (12) cm/s, corresponding to a temperature of 9 (2) mK. The variation of the number of trapped atoms as a function of laser detuning and intensity, trap magnetic field gradient and oven temperature is analyzed. Spatial structures of the trapped atoms, like stable rings created by vortex forces, have been observed. This is the first time that these structures, already observed in alkali-metal elements, are reported in MOTs of alkaline-earth elements.
Laser cooling methods provide the possibility to obtain very well collimated and slow atomic beams. These intense sources have attracted new interest in the manipulation of atomic trajectories. Atom optical schemes based on the optical dipole force are very attractive, for example in atom lithography where atomic beams are focused by standing wave light elds, to create periodic nanostructures. However, in applications where more complex structures are desirable or decoherence due to spontaneous emission has to be avoided, magnetic atom optical components are more attractive. For example, at and curved atomic mirrors with high reflectivity and low surface rough ness can be built from periodically magnetized videotapes. First, with a collimated and polarized cesium atomic beam from a Zeeman-slower apparatus, we have investigated the deflection of the atomic beam by a sinusoidally magnetized videotape with a period length of 30 μm. From these measurements we have determined the magnetic eld strength at the surface to be 0.05 Tesla. The reflectivity has been found to be consistent with 100%. The very large eld gradients produced by the tape can be exploited to guide atoms on curved trajectories with small radii of curvature. With a radius of 9.5 cm we have obtained a maximum deflection angle of 25° which is limited by technical constraint. Second, we have built a setup based on a 2D-MOT for generating a slow atomic beam with a velocity of 20 m/s. After leaving the optical collimation and the optical polarization stages, the atomic beam is reflected after one bounce onto the videotape up to angles as large as 7°. We exploited the natural curvature of our videotape and we demonstrated the focusing of the atomic beam after one and two bounces depending on the curvature of the videotape. The focal length and the angles of deflection enable to deduce the local radii of curvature. We have confronted our results by testing the focusing of the videotape with a red laser and by performing a numerical simulation which prove the consistency with the atomic beam experiments.
A method for focusing neutral atoms based on the light-pressure force in a nonuniform magnetic field is proposed and analyzed. Its particular scheme is realized by means of a two-dimensional magneto-optical trap using a thermal beam of Rb atoms. A feature of this focusing method is the linear dependence of the focal length on the longitudinal velocity of atoms in contrast to the quadratic dependence in the known methods of focusing material-particle beams. The minimum size of the waist of the focused atomic beam is equal to 270 µm. Owing to focusing by means of the two-dimensional magneto-optical trap, the velocity monochromatization of a thermal atomic beam is realized: the width of the distribution of the longitudinal atomic velocities in the beam is reduced from 350 to 60 m/s.
We decelerated an atomic beam of 87{}^{87}87Rb using a stimulated-emission slowing technique that employs a bichromatic standing light wave of high intensity, and increased the atom number in a magneto-optical trap (MOT) of low capture velocity by up to a factor of 14, and the load rate into the MOT by a factor of 20. We performed the slowing over distances under 1.5 cm with 5.2 mW of total power in the bichromatic beams. The average stimulated force was 2.2 times the maximum spontaneous emission force, and could be made even stronger in a smaller apparatus.
We analyze a method for serial writing of arbitrary two-dimensional patterns using optical focusing of a collimated atomic beam. A spatial light modulator is used in a side illumination geometry to create a localized optical spot with secondary maxima that are well separated from the central peak. Numerical simulation of a lithography experiment using a magneto-optical trap as a source of cold Cs atoms, collimation and cooling in a magnetic guide, and optical focusing predicts FWHM pixel sizes of 110×110 nm and writing times of ∼20 ms/pixel.