Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Quantum-correlated Light Source from Dual-seeded Four-wave Mixing with a Diode Laser System

Meng-Chang Wu, Nicholas R. Brewer, Rory W. Speirs, Bonnie L. Schmittberger, K. M. Jones, Paul D. Lett

Published Jan 1, 2019• 0 citations
Publisher

Abstract

We have obtained broadband intensity-difference squeezing from sub 10 Hz to 20 MHz via four-wave mixing (4WM) in a rubidium vapor. This was accomplished by dual-seeding the 4WM process and using semiconductor diode lasers.
DOI
10.1364/cleo_at.2019.jtu2a.123

Related papers

Quantum-correlated Light Source from Dual-seeded Four-wave Mixing with a Diode Laser System

Meng-Chang Wu, Nicholas R. Brewer, Rory W. Speirs +3 more

We have obtained broadband intensity-difference squeezing from sub 10 Hz to 20 MHz via four-wave mixing (4WM) in a rubidium vapor. This was accomplished by dual-seeding the 4WM process and using semiconductor diode lasers. © 2019 The Author(s)

Conference on Lasers and Electro-Optics•May 5, 2019•0 citations

Twin-beam Intensity-difference Squeezing below 10 Hz from Dual-seeded Four-wave Mixing

Meng-Chang Wu, Bonnie L. Schmittberger, Nicholas R. Brewer +2 more

We have obtained bright-beam intensity-difference squeezing below 10 Hz via four-wave mixing in a rubidium vapor. This was accomplished by increasing phase matching angle and using two seed beams to balance the power.

Frontiers in Optics•Jan 1, 2018•0 citations

Towards Low-frequency Squeezed Light and Its Applications with Four-wave Mixing in Rubidium Vapor

Meng-Chang Wu

We study a variety of mechanisms that introduce noise into squeezed light generated by a four-wave mixing (4WM) process in Rb vapor. The noise from the seeding beam itself is a general noise that appears in any squeezed light generated from a seeding process. This noise dominates in the squeezed light at acoustic and lower measurement frequencies. A second excess noise source is observed in the twin beams pumped by either a diode laser system or a Ti:sapphire laser system. This excess noise is much stronger in the diode laser systems. It is present in the twin beams at measurement frequencies when the 4WM gain is reduced toward unity. Most of this excess noise can be removed with a dual-seeded 4WM scheme. A third noise source we examine is from a two-beam coupling that degrades the squeezing of the dual-seeded 4WM process at low frequencies of the order of the atomic transition linewidth. This noise can be avoided by seeding skew rays in the 4WM gain region. This gives us an insight to solve this "cross talk" problem by imaging the source in the 4WM gain region. In addition to studying noise sources, we propose a gain-independent calibration scheme that relies on higher order correlation function for the absolute calibration of photodiodes. Having low frequency squeezing is really important if we record quantum images with a CCD camera, which has a slow shutter speed. Also, it's been very difficult for people to get low-frequency squeezing. We obtain a record level of low-frequency squeezing using a simple dual-seeding technique. With this study of noise sources we are closer to having a portable quantum light source using diode lasers.

•Jan 1, 2020•0 citations

Compact diode-laser-pumped quantum light source based on four-wave mixing in hot rubidium vapor

Zhongzhong Qin, Jietai Jing, Jun Zhou +4 more

Using a nondegenerate four-wave mixing process in hot rubidium vapor, we demonstrate a compact diode-laser-pumped system for the generation of intensity-difference squeezing down to 8 kHz with a maximum squeezing of -7 dB. To the best of our knowledge, this is the first demonstration of kilohertz-level intensity-difference squeezing using a semiconductor laser as the pump source. This scheme is of interest for experiments involving atomic ensembles, quantum communications, and precision measurements. The diode-laser-pumped system would extend the range of possible applications for squeezing due to its low cost, ease of operation, and ease of integration.

Optics Letters•Jul 21, 2012•57 citations

Twin-beam intensity-difference squeezing below 10 Hz

Meng-Chang Wu, Bonnie L. Schmittberger, Nicholas R. Brewer +3 more

We report the generation of strong, bright-beam intensity-difference squeezing down to measurement frequencies below 10 Hz. We generate two-mode squeezing in a four-wave mixing (4WM) process in Rb vapor, where the single-pass-gain nonlinear process does not require cavity locking and only relies on passive stability. We use diode laser technology and several techniques, including dual seeding, to remove the noise introduced by seeding the 4WM process as well as the background noise. Twin-beam intensity-difference squeezing down to frequencies limited only by the mechanical and atmospheric stability of the lab is achieved. These results should enable important low-frequency applications such as direct intensity-difference imaging with bright beams on integrating detectors.

arXiv:1810.09589•Optics Express•Feb 8, 2019•23 citations

A compact source for quantum image processing with four-wave mixing in Rubidium-85

Ulrich Vogl, Ryan Glasser, Paul D. Lett

We have built a compact light source for bright squeezed twin-beams at 795nm based on four-wave-mixing in atomic 85Rb vapor. With a total optical power of 400mW derived from a free running diode laser and a tapered amplifier to pump the four-wave-mixing process, we achieve 2.1 dB intensity difference squeezing of the twin beams below the standard quantum limit, without accounting for losses. Squeezed twin beams generated by the type of source presented here could be used as reference for the precise calibration of photodetectors. Transferring the quantum correlations from the light to atoms in order to generate correlated atom beams is another interesting prospect. In this work we investigate the dispersion that is generated by the employed fourwave- mixing process with respect to bandwidth and dependence on probe detuning. We are currently using this squeezed light source to test the transfer of spatial information and quantum correlations through media of anomalous dispersion.

arXiv:1209.2464•Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 10, 2012•0 citations
We study a variety of mechanisms that introduce noise into squeezed light generated by a four-wave mixing (4WM) process in Rb vapor. The noise from the seeding beam itself is a general noise that appears in any squeezed light generated from a seeding process. This noise dominates in the squeezed light at acoustic and lower measurement frequencies. A second excess noise source is observed in the twin beams pumped by either a diode laser system or a Ti:sapphire laser system. This excess noise is much stronger in the diode laser systems. It is present in the twin beams at measurement frequencies when the 4WM gain is reduced toward unity. Most of this excess noise can be removed with a dual-seeded 4WM scheme. A third noise source we examine is from a two-beam coupling that degrades the squeezing of the dual-seeded 4WM process at low frequencies of the order of the atomic transition linewidth. This noise can be avoided by seeding skew rays in the 4WM gain region. This gives us an insight to solve this "cross talk" problem by imaging the source in the 4WM gain region. In addition to studying noise sources, we propose a gain-independent calibration scheme that relies on higher order correlation function for the absolute calibration of photodiodes. Having low frequency squeezing is really important if we record quantum images with a CCD camera, which has a slow shutter speed. Also, it's been very difficult for people to get low-frequency squeezing. We obtain a record level of low-frequency squeezing using a simple dual-seeding technique. With this study of noise sources we are closer to having a portable quantum light source using diode lasers.
Using a nondegenerate four-wave mixing process in hot rubidium vapor, we demonstrate a compact diode-laser-pumped system for the generation of intensity-difference squeezing down to 8 kHz with a maximum squeezing of -7 dB. To the best of our knowledge, this is the first demonstration of kilohertz-level intensity-difference squeezing using a semiconductor laser as the pump source. This scheme is of interest for experiments involving atomic ensembles, quantum communications, and precision measurements. The diode-laser-pumped system would extend the range of possible applications for squeezing due to its low cost, ease of operation, and ease of integration.
We report the generation of strong, bright-beam intensity-difference squeezing down to measurement frequencies below 10 Hz. We generate two-mode squeezing in a four-wave mixing (4WM) process in Rb vapor, where the single-pass-gain nonlinear process does not require cavity locking and only relies on passive stability. We use diode laser technology and several techniques, including dual seeding, to remove the noise introduced by seeding the 4WM process as well as the background noise. Twin-beam intensity-difference squeezing down to frequencies limited only by the mechanical and atmospheric stability of the lab is achieved. These results should enable important low-frequency applications such as direct intensity-difference imaging with bright beams on integrating detectors.
We have built a compact light source for bright squeezed twin-beams at 795nm based on four-wave-mixing in atomic 85Rb vapor. With a total optical power of 400mW derived from a free running diode laser and a tapered amplifier to pump the four-wave-mixing process, we achieve 2.1 dB intensity difference squeezing of the twin beams below the standard quantum limit, without accounting for losses. Squeezed twin beams generated by the type of source presented here could be used as reference for the precise calibration of photodetectors. Transferring the quantum correlations from the light to atoms in order to generate correlated atom beams is another interesting prospect. In this work we investigate the dispersion that is generated by the employed fourwave- mixing process with respect to bandwidth and dependence on probe detuning. We are currently using this squeezed light source to test the transfer of spatial information and quantum correlations through media of anomalous dispersion.