© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

IEICE Transactions on Communications

Block-Based Scheduling Algorithm for Layered Decoding of Block LDPC Codes

Sangjoon Park

Published Apr 27, 2022• 1 citation

Abstract

This paper proposes an efficient scheduling algorithm for the layered decoding of block low-density parity-check (LDPC) codes. To efficiently configure check node-based scheduling groups, the proposed algorithm utilizes the base matrix of the block LDPC code for a block-by-block scheduling group configuration; i.e., the proposed algorithm generates a scheduling group of check nodes, satisfying the weight condition of the layered decoding, which is performed in block units (including several check nodes). Therefore, unlike the conventional scheduling algorithms performed in node units, the proposed algorithm can efficiently generate scheduling groups for layered decoding at low computational complexity and memory requirements. In addition, to accelerate the decoding convergence speed, check nodes are allocated in each scheduling group such that messages from check nodes up to the current group are delivered as evenly as possible to bit nodes. Simulation results confirm that the proposed algorithm can accelerate decoding convergence compared to other block-based scheduling algorithms for layered decoding of block LDPC codes.

DOI: 10.1587/transcom.2022ebp3032

Related papers

Optimized decoding schedule for irregular LDPC codes

Xuwei Chen, Hui Ling Yu, Youyun Xu

Recently, the concept of layered decoding schedule for Low-Density Parity-Check codes has been introduced. But the advantage of layered decoding schedule for irregular LDPC codes is not as obvious as regular LDPC codes. The major drawback of the layered irregular LDPC codes versus the layered regular LDPC codes is its comparative low convergence decoding speed. Simulation results show that different bit node degrees of irregular LDPC codes significantly contribute to the decoding performance. The decoding performance of bit nodes with different degrees is of great difference. Bit nodes with small degrees always converge slower than larger ones. In this paper, we propose an optimized decoding schedule for irregular LDPC codes to accelerate the decoding convergence rate. Meanwhile, for the irregular LDPC decoder, the faster decoding speed means a higher throughput and almost the same error performance.

IET International Communication Conference on Wireless Mobile and Computing (CCWMC)•Jan 1, 2009•2 citations

An efficient dynamic schedule for layered belief-propagation decoding of LDPC codes

Guojun Han, Xingcheng Liu

An efficient dynamic schedule for layered belief-propagation (LBP) decoding of low-density parity-check (LDPC) codes is presented, in which the check nodes connecting to a variable node with maximum relative message residual are chosen in each dynamic decoding iteration, and then LBP is performed for these check nodes. In this schedule we combined the features of lazy schedule and node-wise residual belief propagation (NWRBP) together while keeping the extra computational complexity very low. Simulation results show that the new schedule speeds up the convergence rate and greatly improves error performance at medium to high signal-to-noise ratio (SNR) when compared to the standard LBP decoding algorithm.

IEEE Communications Letters•Dec 1, 2009•29 citations

An efficient scheduling scheme for layered belief propagation decoding of regular LDPC codes

Hua Li, Hong Wei Ding, Linhua Zheng +3 more

Schedule plays an important role in layered belief propagation (BP) decoding of low-density parity-check (LDPC) codes. It affects the error-rate performance as well as convergence rate of the decoder. In this paper, an efficient scheduling scheme is proposed to arrange the updating order of check nodes for layered BP decoder of regular LDPC codes. This scheme selects check node one at a time based on the reliability of the variable nodes. Specifically each time the check node with maximum number of low-reliability neighbors is selected. For simplicity, we introduce the updating state instead of the real-time messages to represent variable-node reliability. Simulation results on regular LDPC codes prove that the proposed scheduling scheme can obtain efficient schedules with fast convergence and good error-rate performance.

International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT)•Oct 1, 2016•6 citations

Fast convergence algorithm for decoding of low density parity check codes

Jin Xie, Liuguo Yin, Ning Ge +1 more

Abstract: In this paper, a fast-convergence algorithm is proposed for the decoding of low-density parity-check (LDPC) codes. By putting more weight on the message update from check node to variable node in current iteration, the proposed method speeds up the decoding significantly. Simulation results show that compared with the standard layered min-sum decoding algorithm, the proposed scheme may reduce about 1/6 iteration numbers for LDPC codes used in DVB-S2, with hardware complexity overhead less than 2%. Key–Words: LDPC code, fast convergence decoding algorithm, layered decoding, min-sum algorithm, hardware implementation 1

WSEAS TRANSACTIONS on COMMUNICATIONS archive•Jul 1, 2009•1 citation

Analysis of Complexity and Convergence Speed of Sequential Schedules for Decoding LDPC Codes

Sunghwan Kim, Min‐Ho Jang, Song‐Nam Hong +1 more

In this paper, a sequential message-passing decoding algorithm of low-density parity-check (LDPC) codes by partitioning check nodes is analyzed. This decoding algorithm shows better bit error rate (BER) performance than the conventional message-passing decoding algorithm, especially for the small number of iterations. Analytical results tell us that as the number of partitioned subsets of check nodes increases, the BER performance becomes better. We also derive the recursive equations for mean values of messages at check and variable nodes by using density evolution with Gaussian approximation. Finally, the analytical results are conflrmed by the simulation results.

•Jan 1, 2006•2 citations

Analysis of Efficient Scheduling in Layered Decoding of LDPC Codes

Dongxu Chang, Guanghui Wang, Guiying Yan +1 more

In this study, we analyze the characteristics of scheduling sequences for Layered belief propagation (LBP) that can result in efficient decoding on Low-density parity-check (LDPC) codes. Specifically, we claim that scheduling sequences leading to high decoding efficiency should prioritize updating check nodes with lower error probabilities aggregated from neighboring variable nodes. We prove this conclusion separately in both BEC and BI-AWGN channels. Some observable characteristics in "good" scheduling sequences regarding row weights, rows connected to punctured columns, and column weights can serve as corollaries to this conclusion. Based on these, we design a dynamic scheduling algorithm, which can further demonstrate the effectiveness of these characteristics through simulation experiments.

IEEE Globecom Workshops (GC Wkshps)•Dec 8, 2024•1 citation

This paper proposes an efficient scheduling algorithm for the layered decoding of block low-density parity-check (LDPC) codes. To efficiently configure check node-based scheduling groups, the proposed algorithm utilizes the base matrix of the block LDPC code for a block-by-block scheduling group configuration; i.e., the proposed algorithm generates a scheduling group of check nodes, satisfying the weight condition of the layered decoding, which is performed in block units (including several check nodes). Therefore, unlike the conventional scheduling algorithms performed in node units, the proposed algorithm can efficiently generate scheduling groups for layered decoding at low computational complexity and memory requirements. In addition, to accelerate the decoding convergence speed, check nodes are allocated in each scheduling group such that messages from check nodes up to the current group are delivered as evenly as possible to bit nodes. Simulation results confirm that the proposed algorithm can accelerate decoding convergence compared to other block-based scheduling algorithms for layered decoding of block LDPC codes.

Recently, the concept of layered decoding schedule for Low-Density Parity-Check codes has been introduced. But the advantage of layered decoding schedule for irregular LDPC codes is not as obvious as regular LDPC codes. The major drawback of the layered irregular LDPC codes versus the layered regular LDPC codes is its comparative low convergence decoding speed. Simulation results show that different bit node degrees of irregular LDPC codes significantly contribute to the decoding performance. The decoding performance of bit nodes with different degrees is of great difference. Bit nodes with small degrees always converge slower than larger ones. In this paper, we propose an optimized decoding schedule for irregular LDPC codes to accelerate the decoding convergence rate. Meanwhile, for the irregular LDPC decoder, the faster decoding speed means a higher throughput and almost the same error performance.

An efficient dynamic schedule for layered belief-propagation (LBP) decoding of low-density parity-check (LDPC) codes is presented, in which the check nodes connecting to a variable node with maximum relative message residual are chosen in each dynamic decoding iteration, and then LBP is performed for these check nodes. In this schedule we combined the features of lazy schedule and node-wise residual belief propagation (NWRBP) together while keeping the extra computational complexity very low. Simulation results show that the new schedule speeds up the convergence rate and greatly improves error performance at medium to high signal-to-noise ratio (SNR) when compared to the standard LBP decoding algorithm.

Schedule plays an important role in layered belief propagation (BP) decoding of low-density parity-check (LDPC) codes. It affects the error-rate performance as well as convergence rate of the decoder. In this paper, an efficient scheduling scheme is proposed to arrange the updating order of check nodes for layered BP decoder of regular LDPC codes. This scheme selects check node one at a time based on the reliability of the variable nodes. Specifically each time the check node with maximum number of low-reliability neighbors is selected. For simplicity, we introduce the updating state instead of the real-time messages to represent variable-node reliability. Simulation results on regular LDPC codes prove that the proposed scheduling scheme can obtain efficient schedules with fast convergence and good error-rate performance.

Abstract: In this paper, a fast-convergence algorithm is proposed for the decoding of low-density parity-check (LDPC) codes. By putting more weight on the message update from check node to variable node in current iteration, the proposed method speeds up the decoding significantly. Simulation results show that compared with the standard layered min-sum decoding algorithm, the proposed scheme may reduce about 1/6 iteration numbers for LDPC codes used in DVB-S2, with hardware complexity overhead less than 2%. Key–Words: LDPC code, fast convergence decoding algorithm, layered decoding, min-sum algorithm, hardware implementation 1

In this paper, a sequential message-passing decoding algorithm of low-density parity-check (LDPC) codes by partitioning check nodes is analyzed. This decoding algorithm shows better bit error rate (BER) performance than the conventional message-passing decoding algorithm, especially for the small number of iterations. Analytical results tell us that as the number of partitioned subsets of check nodes increases, the BER performance becomes better. We also derive the recursive equations for mean values of messages at check and variable nodes by using density evolution with Gaussian approximation. Finally, the analytical results are conflrmed by the simulation results.

In this study, we analyze the characteristics of scheduling sequences for Layered belief propagation (LBP) that can result in efficient decoding on Low-density parity-check (LDPC) codes. Specifically, we claim that scheduling sequences leading to high decoding efficiency should prioritize updating check nodes with lower error probabilities aggregated from neighboring variable nodes. We prove this conclusion separately in both BEC and BI-AWGN channels. Some observable characteristics in "good" scheduling sequences regarding row weights, rows connected to punctured columns, and column weights can serve as corollaries to this conclusion. Based on these, we design a dynamic scheduling algorithm, which can further demonstrate the effectiveness of these characteristics through simulation experiments.