Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Wiley eBooks

Josephson Junctions

Daniel D. Stancil, Gregory T. Byrd

Published Apr 5, 2022• 0 citations
Publisher

Abstract

The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.

DOI
10.1002/9781119750758.ch8

Related papers

Electrodynamics of Josephson Junctions and Circuits

Shuai Zhou

The concept of quantum-mechanical tunneling of a particle through a potential barrier was known already in the 1920s. The discovery of tunneling of electron pairs across a superconductor–insulator–superconductor (SIS) junction was made by Josephson in 1962 and experimentally confirmed first by Anderson and Rowell in 1963. The phenomenon of that the electron-pair tunneling may produce a dissipationless current which may flow at zero bias voltage opened not only a new chapter in solid-state physics, but also provided a wide variety of stimulating applications. In this chapter, we introduce the phenomenology of the Josephson effect, formulate the electrodynamics of the Josephson junctions, and outline some circuits of practical interest. Some electrodynamic analyses are given to superconducting quantum interference devices (SQUIDs). A brief discussion about the possible use of SQUIDs and about the physical limits of various switching technologies in comparison with the superconducting electronic technology is also provided at the end of this chapter.

Wiley eBooks•Jul 9, 1999•0 citations

Effective Models of Superconducting Quantum Interference Devices

R. De

It is well known that the electrodynamic properties of SQUIDs (Superconducting Quantum Interference Devices) are obtained by means of the dynamics of the Josephson junctions in these superconducting system (Barone & Paterno, 1982; Likharev, 1986; Clarke & Braginsky, 2004). Due to the intrinsic macroscopic coherence of superconductors, r. f. SQUIDs have been proposed as basic units (qubits) in quantum computing (Bocko et al., 1997). In the realm of quantum computing non-dissipative quantum systems with small (or null) inductance parameter and finite capacitance of the Josephson junctions (JJs) are usually considered (Crankshaw & Orlando, 2001). The mesoscopic non-simply connected classical devices, on the other hand, are generally operated and studied in the overdamped limit with negligible capacitance of the JJs and small (or null) values of the inductance parameter. Nonetheless, r. f. SQUIDs find application in a large variety of fields, from biomedicine to aircraft maintenance (Clarke & Braginsky, 2004), justifying actual scientific interest in them.

InTech eBooks•Oct 17, 2012•0 citations

Superconducting Quantum Electronics

Sasan Razmkhah, Pascal Febvre

Superconducting quantum electronics is formally born in 1911, three years after Heike Kamerlingh Onnes was able to liquefy helium at the University of Leiden in the Netherlands. Josephson junctions are simple devices made of two superconductors coupled through a thin barrier, which can be made of one of several layers of insulating, normal metal, or ferromagnetic material. This chapter discusses the surface impedance of superconductors and their behavior in the radiofrequency (RF) regime. After the Josephson junction discovery, many new applications surfaced and the Josephson junction has become to date the most versatile active element used for superconducting analogue, digital and quantum electronics. These applications include magnetometers and gradiometers based on RF and DC superconducting quantum interference devices (SQUIDs), Josephson voltage standards, analogue-to-digital converters, quasi-one-junction SQUIDs, digital logic circuits, quantum computing, quantum communication and quantum sensing. The chapter discusses some of its applications.

Wiley eBooks•Jul 21, 2023•10 citations

Small-Capacitance Josephson Junctions: One-Dimensional Arrays and Single Junctions

道生 渡部, David B. Haviland

We review experiments on small-capacitance Josephson junctions. When the Josephson junction is fabricated in the configuration of dc superconducting quantum interference device (SQUID), the Josephson coupling can be tuned IN SITU with an external magnetic field. The electrical transport properties of one-dimensional arrays of small-capacitance dc SQUIDs have been investigated in order to study the superconductor-insulator transition. The arrays have also been used to bias a single Josephson junction, and a clear Coulomb blockade of Cooper-pair tunneling has been observed in the single junction.

arXiv:cond-mat/0301340•Jan 20, 2003•6 citations

Low-Capacitance Josephson Junctions

Andrii P. Shapovalov, Pascal Febvre, Uğur Yılmaz +3 more

The Josephson effect, as an example of a macroscopic quantum phenomenon, reveals itself in the three-layer heterostructures formed by two superconductors coupled by a weak link that usually consists of a 1-2 nm-thick insulating barrier.The traditional way of modelling such-systems' dynamics is based on an equivalent circuit that comprises three parallel elements: a pure superconducting element with a certain supercurrent-versus-Josephson phase difference dependence, a resistor R, and a capacitor C. In this short review, we analyse the practical problem of reducing the junction capacitance while maintaining or slightly impairing other characteristics.Some arguments are presented to explain why the capacitance should be suppressed and how it will affect performance of superconducting quantum interference devices (SQUIDs) and digital electronics circuits.As a solution for low-capacitance junctions, we propose a weak link made of an amorphous-silicon interlayer doped with nanoscale metallic drops between the two superconducting Mo-Re-alloy electrodes.

Progress in Physics of Metals•Mar 1, 2020•4 citations

Nonlocal superconducting quantum interference device

Taewan Noh, Andrew Kindseth, Venkat Chandrasekhar

Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.

arXiv:2011.06667•Physical review. B./Physical review. B•Aug 4, 2021•13 citations
The device that is the workhorse of most superconducting computers is the Josephson Junction, which consists of two superconducting regions separated by a non-superconducting layer—usually an insulator. In this chapter, the authors begin with a basic discussion of tunneling. They use a phenomenological approach to model the coupling between the superconductors in a Josephson junction resulting from the tunneling of Cooper pairs. A qubit can also be formed by placing two Josephson junctions in parallel. This configuration is referred to as a Superconducting Quantum Interference Device, or SQUID. By biasing the Josephson junction with different currents, it can also be used to realize a time-varying inductance that is used in low noise parametric amplifiers. Finally, when two junctions are placed in parallel, the effective inductance can be varied by the application of a magnetic field. This makes it possible to realize tunable qubits.
The concept of quantum-mechanical tunneling of a particle through a potential barrier was known already in the 1920s. The discovery of tunneling of electron pairs across a superconductor–insulator–superconductor (SIS) junction was made by Josephson in 1962 and experimentally confirmed first by Anderson and Rowell in 1963. The phenomenon of that the electron-pair tunneling may produce a dissipationless current which may flow at zero bias voltage opened not only a new chapter in solid-state physics, but also provided a wide variety of stimulating applications. In this chapter, we introduce the phenomenology of the Josephson effect, formulate the electrodynamics of the Josephson junctions, and outline some circuits of practical interest. Some electrodynamic analyses are given to superconducting quantum interference devices (SQUIDs). A brief discussion about the possible use of SQUIDs and about the physical limits of various switching technologies in comparison with the superconducting electronic technology is also provided at the end of this chapter.
It is well known that the electrodynamic properties of SQUIDs (Superconducting Quantum Interference Devices) are obtained by means of the dynamics of the Josephson junctions in these superconducting system (Barone & Paterno, 1982; Likharev, 1986; Clarke & Braginsky, 2004). Due to the intrinsic macroscopic coherence of superconductors, r. f. SQUIDs have been proposed as basic units (qubits) in quantum computing (Bocko et al., 1997). In the realm of quantum computing non-dissipative quantum systems with small (or null) inductance parameter and finite capacitance of the Josephson junctions (JJs) are usually considered (Crankshaw & Orlando, 2001). The mesoscopic non-simply connected classical devices, on the other hand, are generally operated and studied in the overdamped limit with negligible capacitance of the JJs and small (or null) values of the inductance parameter. Nonetheless, r. f. SQUIDs find application in a large variety of fields, from biomedicine to aircraft maintenance (Clarke & Braginsky, 2004), justifying actual scientific interest in them.
Superconducting quantum electronics is formally born in 1911, three years after Heike Kamerlingh Onnes was able to liquefy helium at the University of Leiden in the Netherlands. Josephson junctions are simple devices made of two superconductors coupled through a thin barrier, which can be made of one of several layers of insulating, normal metal, or ferromagnetic material. This chapter discusses the surface impedance of superconductors and their behavior in the radiofrequency (RF) regime. After the Josephson junction discovery, many new applications surfaced and the Josephson junction has become to date the most versatile active element used for superconducting analogue, digital and quantum electronics. These applications include magnetometers and gradiometers based on RF and DC superconducting quantum interference devices (SQUIDs), Josephson voltage standards, analogue-to-digital converters, quasi-one-junction SQUIDs, digital logic circuits, quantum computing, quantum communication and quantum sensing. The chapter discusses some of its applications.
We review experiments on small-capacitance Josephson junctions. When the Josephson junction is fabricated in the configuration of dc superconducting quantum interference device (SQUID), the Josephson coupling can be tuned IN SITU with an external magnetic field. The electrical transport properties of one-dimensional arrays of small-capacitance dc SQUIDs have been investigated in order to study the superconductor-insulator transition. The arrays have also been used to bias a single Josephson junction, and a clear Coulomb blockade of Cooper-pair tunneling has been observed in the single junction.
The Josephson effect, as an example of a macroscopic quantum phenomenon, reveals itself in the three-layer heterostructures formed by two superconductors coupled by a weak link that usually consists of a 1-2 nm-thick insulating barrier.The traditional way of modelling such-systems' dynamics is based on an equivalent circuit that comprises three parallel elements: a pure superconducting element with a certain supercurrent-versus-Josephson phase difference dependence, a resistor R, and a capacitor C. In this short review, we analyse the practical problem of reducing the junction capacitance while maintaining or slightly impairing other characteristics.Some arguments are presented to explain why the capacitance should be suppressed and how it will affect performance of superconducting quantum interference devices (SQUIDs) and digital electronics circuits.As a solution for low-capacitance junctions, we propose a weak link made of an amorphous-silicon interlayer doped with nanoscale metallic drops between the two superconducting Mo-Re-alloy electrodes.
Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.