Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Access

Physical-Layer Secret Key Generation in Power Line Communication Networks

Jiarui Zhang, Xiaosheng Liu, Ying Cui, Dianguo Xu

Published Jan 1, 2022• 19 citations
Publisher

Abstract

Due to the inherent broadcast nature, power line communication (PLC) is vulnerable to eavesdropping. Traditionally, the secret keys are generated/distributed by pre-shared keys, adaptive tone mapping, or asymmetric encryption algorithm. All of these methods face problems such as high computational complexity, high cost, or less security. To solve the problem, a physical layer security (PLS)-based secret key generation (SKG) scheme aiming at the typical in-home broadband PLC network is proposed in this paper. However, the slowly time-varying characteristic and the serious noise interference in PLC channels will degrade the performance of the PLS-based SKG scheme. To break through the limitation of the randomness of PLC channels, two-way random signals are introduced. To make the SKG system more resistant to noise, the channel frequency response-based adaptive quantization (CFR-AQ) algorithm is designed, in which the amplitude threshold and the quantization level are adaptive to the noise power and the target key disagreement rate (KDR) to maximize the key generation rate (KGR). The performance is analyzed in two scenarios: single eavesdropper and multiple eavesdroppers. The simulation results demonstrate that the proposed scheme has a good overall performance in terms of KDR, KGR, and security with a lower complexity in the presence of single or multiple non-collusive eavesdroppers, and it can be regarded as an alternative solution to generate secret keys in PLC networks.

DOI
10.1109/access.2022.3168842

Related papers

Secure PHY Layer Key Generation in the Asymmetric Power Line Communication Channel

Federico Passerini, Andrea M. Tonello

Leakage of information in power line communication (PLC) networks is a threat to privacy and security. A way to enhance security is to encode the transmitted information with the use of a secret key. If the communication channel exhibits common characteristics at both ends and these are unknown to a potential eavesdropper, then it is possible to locally generate a common secret key at the two communication ends without the need for sharing it through the broadcast channel. This is known as physical layer key generation. To this aim, known techniques have been developed exploiting the transfer function of symmetric channels. However, the PLC channel is in general not symmetric, but just reciprocal. Therefore, in this paper, we first analyze the characteristics of the channel to verify whether physical layer key generation can be implemented. Then, we propose two novel methods that exploit the reciprocity of the PLC channel to generate common information by the two intended users. This information is processed through different quantization techniques to generate secret keys locally. To assess the security of the generated keys, we analyze the spatial correlation of PLC channels. This allows verifying whether the eavesdropper’s channels are weakly correlated with the intended users’ channel. Consequently, it is found that the information leaked to a possible eavesdropper has very low correlation to the locally generated key. The analysis and proposed methods are validated on a measurement dataset.

arXiv:1809.09439•Electronics•Apr 2, 2020•27 citations

On Quantization for Secret Key Generation From Wireless Channel Samples

Muhammad Adil, Shurjeel Wyne, Syed Junaid Nawaz

Physical layer security (PLS) techniques hold promise for augmenting secure communications in the 5thgeneration of mobile wireless networks. Secret key generation (SKG) is a PLS technique which exploits the wireless propagation channel's randomness to generate symmetric key bits for information encryption and decryption. This work proposes symmetric key generation based on non-uniform quantization of the received signal strength (RSS) samples of a Nakagami-$m$ fading channel. The proposed strategy for non-uniform quantization for SKG aims to set quantization thresholds for maximal key randomness and high values of key generation rate (KGR) and key agreement probability (KAP). Finally, a framework is proposed to use single node RSS measurements, readily available in the literature, to generate RSS samples at the other link end. This framework facilitates the testing of new SKG algorithms that require simultaneous RSS measurements by the legitimate nodes, which are not readily available in the open literature. The effectiveness of the proposed SKG scheme is validated through Monte Carlo methods and the National Institute of Standards and Technology (NIST) test suite for assessing the randomness of the generated key sequence.

IEEE Access•Jan 1, 2021•40 citations

A Survey of Quantization Techniques for Physical Layer-Based Secret Key Generation in IoT Systems

Abdullah Dakhlallah Alshamdayn, Manki Min

Wireless communication systems are becoming increasingly important in our daily lives, especially with the rapid expansion of the Internet of Things (IoT). Secure and reliable communication is essential for the correct functioning of critical applications and use cases such as healthcare, finance, transportation, and industrial automation. However, the growing number of connected devices introduces significant challenges to data security and privacy due to the open nature of wireless networks. While traditional encryption methods are effective, they can be resource-intensive and impractical for resource-constrained IoT environments. Physical layer security (PLS) provides a lightweight alternative by leveraging the inherent characteristics of wireless channels to generate symmetric secret keys without requiring third-party infrastructure. The PLS key generation process involves four main stages: channel sampling, quantization, reconciliation, and privacy amplification. This paper provides a comprehensive survey of existing quantization schemes, as this step plays a crucial role in determining the key generation rate (KGR) and key disagreement rate (KDR). Additionally, the paper classifies quantization methods as either lossless or lossy, providing insights into the trade-offs between security and efficiency.

IEEE International Conference on Computing (ICOCO)•Dec 12, 2024•3 citations

High-Rate Secret Key Generation Using Physical Layer Security and Physical Unclonable Functions

Tasneem Assaf, Arafat Al‐Dweik, Youssef Iraqi +6 more

Physical layer security (PLS) can be adopted for efficient key sharing in secured wireless systems. The random nature of the wireless channel and channel reciprocity (CR) are the main pillars for realizing PLS techniques. However, for applications that involve air-to-air (A2A) transmission, such as unmanned aerial vehicle (UAV) applications, the channel does not generally have sufficient randomness to enable reliable key generation. Therefore, this work proposes a novel system design to mitigate the channel randomness constraint and enable high-rate secret key generation (SKG) process. The proposed system integrates physically unclonable functions (PUFs) and CR principle to securely exchange secret keys between two nodes. Moreover, an adaptive and controllable artificial fading (AF) level with interleaving is used to mitigate the impact of low randomness variations in the wireless channel. The proposed system can operate efficiently even when the channel is nearly flat or time invariant. Consequently, the time required for generating and sharing a key is significantly shorter than conventional techniques. We also propose a novel bit extraction scheme that reduces the number of overhead bits required to share the intermediate keys. The obtained Monte Carlo simulation results show that a key agreement can be reached at the first trial for moderate and high signal-to-noise ratios (SNRs), which is substantially faster than other PLS techniques. Moreover, the results show that inducing AF into static channels reduces the mismatch ratio between the generated secret sequences and degrades the eavesdropper’s capability to predict the secret keys.

IEEE Open Journal of the Communications Society•Jan 1, 2023•38 citations

Secret key generation exploiting channel characteristics in wireless communications

Kui Ren, Hai Su, Qian Wang

Due to the broadcast nature of wireless channels, wireless communication is vulnerable to eavesdropping, message modification, and node impersonation. Securing the wireless communication requires the shared secret keys between the communicating entities. Traditional security schemes rely on public key infrastructures and cryptographic algorithms to manage secret keys. Recently, many physical-layer-based methods have been proposed as alternative solutions for key generation in wireless networks. These methods exploit the inherent randomness of the wireless fading channel to generate secret keys while providing information-theoretical security without intensive cryptographic computations. This article provides an overview of the existing PHY-based key generation schemes exploiting the randomness of the wireless channels. Specifically, we first introduce the fundamental and general framework of the PHY-based key generation schemes and then categorize them into two classes: received-signal-strength-based and channel- phase-based protocols. Finally, we present a performance comparison of them in terms of key disagreement probability, key generation rate, key bit randomness, scalability, and implementation issues.

IEEE Wireless Communications•Aug 1, 2011•262 citations

A Channel Frequency Response-Based Secret Key Generation Scheme in In-Band Full-Duplex MIMO-OFDM Systems

Haifeng Luo, Navneet Garg, Tharmalingam Ratnarajah

Physical layer-based secret key generation (PHY-SKG) schemes have attracted significant attention in recent years due to their lightweight implementation and ability to achieve information-theoretical security. In this paper, we study a channel frequency response (CFR)-based SKG scheme for in-band full-duplex (IBFD)-multi-input and multi-output (MIMO) systems. We formulate the intrinsic practical imperfections and derive their effects on the probing errors. Then we derive closed-form expressions for the secret key capacity (SKC) in the presence of a passive eavesdropper accordingly. We analyze the asymptotic behavior of the SKC in the high-SNR regime and reveal the fundamental limits for IBFD and HD probing. Based on the asymptotic SKC, we investigate the conditions under which IBFD can outperform HD. Numerical results illustrate that effective analog self-interference cancellation (ASIC) depth is the basis for IBFD probing to gain benefits over HD. Finally, we analyze the properties of the collected samples of the CFR-based SKG scheme and propose an averaging pre-processing and a segmental quantization, which reduce the key disagreement rate and remove the effects of large-scale fading to guarantee randomness. 3GPP specification-based simulations and the National Institute of Standards and Technology (NIST) test suite verify the theoretical analysis and the effectiveness of the proposed SKG scheme.

IEEE Journal on Selected Areas in Communications•Jun 23, 2023•27 citations
Due to the inherent broadcast nature, power line communication (PLC) is vulnerable to eavesdropping. Traditionally, the secret keys are generated/distributed by pre-shared keys, adaptive tone mapping, or asymmetric encryption algorithm. All of these methods face problems such as high computational complexity, high cost, or less security. To solve the problem, a physical layer security (PLS)-based secret key generation (SKG) scheme aiming at the typical in-home broadband PLC network is proposed in this paper. However, the slowly time-varying characteristic and the serious noise interference in PLC channels will degrade the performance of the PLS-based SKG scheme. To break through the limitation of the randomness of PLC channels, two-way random signals are introduced. To make the SKG system more resistant to noise, the channel frequency response-based adaptive quantization (CFR-AQ) algorithm is designed, in which the amplitude threshold and the quantization level are adaptive to the noise power and the target key disagreement rate (KDR) to maximize the key generation rate (KGR). The performance is analyzed in two scenarios: single eavesdropper and multiple eavesdroppers. The simulation results demonstrate that the proposed scheme has a good overall performance in terms of KDR, KGR, and security with a lower complexity in the presence of single or multiple non-collusive eavesdroppers, and it can be regarded as an alternative solution to generate secret keys in PLC networks.
Leakage of information in power line communication (PLC) networks is a threat to privacy and security. A way to enhance security is to encode the transmitted information with the use of a secret key. If the communication channel exhibits common characteristics at both ends and these are unknown to a potential eavesdropper, then it is possible to locally generate a common secret key at the two communication ends without the need for sharing it through the broadcast channel. This is known as physical layer key generation. To this aim, known techniques have been developed exploiting the transfer function of symmetric channels. However, the PLC channel is in general not symmetric, but just reciprocal. Therefore, in this paper, we first analyze the characteristics of the channel to verify whether physical layer key generation can be implemented. Then, we propose two novel methods that exploit the reciprocity of the PLC channel to generate common information by the two intended users. This information is processed through different quantization techniques to generate secret keys locally. To assess the security of the generated keys, we analyze the spatial correlation of PLC channels. This allows verifying whether the eavesdropper’s channels are weakly correlated with the intended users’ channel. Consequently, it is found that the information leaked to a possible eavesdropper has very low correlation to the locally generated key. The analysis and proposed methods are validated on a measurement dataset.
Physical layer security (PLS) techniques hold promise for augmenting secure communications in the 5thgeneration of mobile wireless networks. Secret key generation (SKG) is a PLS technique which exploits the wireless propagation channel's randomness to generate symmetric key bits for information encryption and decryption. This work proposes symmetric key generation based on non-uniform quantization of the received signal strength (RSS) samples of a Nakagami-mmm fading channel. The proposed strategy for non-uniform quantization for SKG aims to set quantization thresholds for maximal key randomness and high values of key generation rate (KGR) and key agreement probability (KAP). Finally, a framework is proposed to use single node RSS measurements, readily available in the literature, to generate RSS samples at the other link end. This framework facilitates the testing of new SKG algorithms that require simultaneous RSS measurements by the legitimate nodes, which are not readily available in the open literature. The effectiveness of the proposed SKG scheme is validated through Monte Carlo methods and the National Institute of Standards and Technology (NIST) test suite for assessing the randomness of the generated key sequence.
Wireless communication systems are becoming increasingly important in our daily lives, especially with the rapid expansion of the Internet of Things (IoT). Secure and reliable communication is essential for the correct functioning of critical applications and use cases such as healthcare, finance, transportation, and industrial automation. However, the growing number of connected devices introduces significant challenges to data security and privacy due to the open nature of wireless networks. While traditional encryption methods are effective, they can be resource-intensive and impractical for resource-constrained IoT environments. Physical layer security (PLS) provides a lightweight alternative by leveraging the inherent characteristics of wireless channels to generate symmetric secret keys without requiring third-party infrastructure. The PLS key generation process involves four main stages: channel sampling, quantization, reconciliation, and privacy amplification. This paper provides a comprehensive survey of existing quantization schemes, as this step plays a crucial role in determining the key generation rate (KGR) and key disagreement rate (KDR). Additionally, the paper classifies quantization methods as either lossless or lossy, providing insights into the trade-offs between security and efficiency.
Physical layer security (PLS) can be adopted for efficient key sharing in secured wireless systems. The random nature of the wireless channel and channel reciprocity (CR) are the main pillars for realizing PLS techniques. However, for applications that involve air-to-air (A2A) transmission, such as unmanned aerial vehicle (UAV) applications, the channel does not generally have sufficient randomness to enable reliable key generation. Therefore, this work proposes a novel system design to mitigate the channel randomness constraint and enable high-rate secret key generation (SKG) process. The proposed system integrates physically unclonable functions (PUFs) and CR principle to securely exchange secret keys between two nodes. Moreover, an adaptive and controllable artificial fading (AF) level with interleaving is used to mitigate the impact of low randomness variations in the wireless channel. The proposed system can operate efficiently even when the channel is nearly flat or time invariant. Consequently, the time required for generating and sharing a key is significantly shorter than conventional techniques. We also propose a novel bit extraction scheme that reduces the number of overhead bits required to share the intermediate keys. The obtained Monte Carlo simulation results show that a key agreement can be reached at the first trial for moderate and high signal-to-noise ratios (SNRs), which is substantially faster than other PLS techniques. Moreover, the results show that inducing AF into static channels reduces the mismatch ratio between the generated secret sequences and degrades the eavesdropper’s capability to predict the secret keys.
Due to the broadcast nature of wireless channels, wireless communication is vulnerable to eavesdropping, message modification, and node impersonation. Securing the wireless communication requires the shared secret keys between the communicating entities. Traditional security schemes rely on public key infrastructures and cryptographic algorithms to manage secret keys. Recently, many physical-layer-based methods have been proposed as alternative solutions for key generation in wireless networks. These methods exploit the inherent randomness of the wireless fading channel to generate secret keys while providing information-theoretical security without intensive cryptographic computations. This article provides an overview of the existing PHY-based key generation schemes exploiting the randomness of the wireless channels. Specifically, we first introduce the fundamental and general framework of the PHY-based key generation schemes and then categorize them into two classes: received-signal-strength-based and channel- phase-based protocols. Finally, we present a performance comparison of them in terms of key disagreement probability, key generation rate, key bit randomness, scalability, and implementation issues.
Physical layer-based secret key generation (PHY-SKG) schemes have attracted significant attention in recent years due to their lightweight implementation and ability to achieve information-theoretical security. In this paper, we study a channel frequency response (CFR)-based SKG scheme for in-band full-duplex (IBFD)-multi-input and multi-output (MIMO) systems. We formulate the intrinsic practical imperfections and derive their effects on the probing errors. Then we derive closed-form expressions for the secret key capacity (SKC) in the presence of a passive eavesdropper accordingly. We analyze the asymptotic behavior of the SKC in the high-SNR regime and reveal the fundamental limits for IBFD and HD probing. Based on the asymptotic SKC, we investigate the conditions under which IBFD can outperform HD. Numerical results illustrate that effective analog self-interference cancellation (ASIC) depth is the basis for IBFD probing to gain benefits over HD. Finally, we analyze the properties of the collected samples of the CFR-based SKG scheme and propose an averaging pre-processing and a segmental quantization, which reduce the key disagreement rate and remove the effects of large-scale fading to guarantee randomness. 3GPP specification-based simulations and the National Institute of Standards and Technology (NIST) test suite verify the theoretical analysis and the effectiveness of the proposed SKG scheme.