In this article, we propose an experimentally feasible scheme for the ultraslow light realization based on the optomechanically induced transparency (OMIT) phenomenon using a hybrid optomechanical system consisting of a one-dimensional Bose-Einstein condensate trapped in a shallow optical lattice considering the nonlinear effect of atom-atom interaction. It is shown how the system can switch from the normal mode splitting to the OMIT regime by manipulation of the s-wave scattering frequency of atomic collisions when the cavity is pumped at a fixed rate. Then, it is shown that an ultraslow light with a time delay more than 150 ms corresponding to a group velocity about 1 mm/s is achievable by controlling the optical lattice depth as well as the strength of atom-atom interaction and the number of atoms. Importantly, such an ultraslow light is detectable in the output of the cavity since it occurs in the frequency region of coupling-probe detuning where the reflection coefficient of the cavity is maximum.
In this article, we propose an experimentally feasible scheme for the ultraslow light realization based on the optomechanically induced transparency (OMIT) phenomenon using a hybrid optomechanical system consisting of a one-dimensional Bose-Einstein condensate trapped in a shallow optical lattice considering the nonlinear effect of atom-atom interaction. It is shown how the system can switch from the normal mode splitting to the OMIT regime by manipulation of the s-wave scattering frequency of atomic collisions when the cavity is pumped at a fixed rate. Then, it is shown that an ultraslow light with a time delay more than 150 ms corresponding to a group velocity about 1 mm/s is achievable by controlling the optical lattice depth as well as the strength of atom-atom interaction and the number of atoms. Importantly, such an ultraslow light is detectable in the output of the cavity since it occurs in the frequency region of coupling-probe detuning where the reflection coefficient of the cavity is maximum.
We theoretically investigate the optomechanically induced transparency (OMIT) phenomenon in a hybrid optomechanical system composing of an optomechanical cavity and a traditional one. A Kerr medium is inserted in the optomechanical cavity and the other traps the atomic ensemble. We demonstrate the appearance of electromagnetically and optomechanically induced transparency when there is only Kerr medium or atoms in the system. We give an explicit explanation for the mechanism of the transparency. Moreover, we set up new scheme for the measurement of Kerr coefficient and the single atom-photon coupling strength. It is shown that Kerr nonlinearity can inhibit the normal mode splitting (NMS) when the tunnel strength is strong coupling. Furthermore, in the output field, slow light and fast light are converted to realize the tunable switch from slow light to fast light. This study has some important guiding significance in the fields of the high precision measurement and quantum information processing.
We investigate the realization of the phenomenon of optomechanically induced gain in a hybrid optomechanical system consisting of an interacting Bose-Einstein condensate trapped inside the optical lattice of a cavity which is generated by an external coupling laser tuned to the red sideband of the cavity. It is shown that the system behaves as an optical transistor while the cavity is exposed to a weak input optical signal which can be amplified considerably in the cavity output if the system is in the unresolved sideband regime. Interestingly, the system has the capability to switch from the resolved to unresolved sideband regime by controlling the s-wave scattering frequency of atomic collisions. We show that the system gain can be enhanced considerably by controlling the s-wave scattering frequency as well as the coupling laser intensity while the system remains in the stable regime. Based on our obtained results, the input signal can be amplified more than 100 million percent in the system output which is much larger than those already reported in the previously proposed similar schemes.
We theoretically investigated a second-order optomechanical-induced transparency (OMIT) process of a hybrid optomechanical system (COMS), which a Bose–Einstein condensate (BEC) in the presence of atom–atom interaction trapped inside a cavity with a moving end mirror. The advantage of this hybrid COMS over a bare COMS is that the frequency of the second mode is controlled by the s-wave scattering interaction. Based on the traditional linearization approximation, we derive analytical solutions for the output transmission intensity of the probe field and the dimensionless amplitude of the second-order sideband (SS). The numerical results show that the transmission intensity of the probe field and the dimensionless amplitude of the SS can be controlled by the s-wave scattering frequency. Furthermore, the control field intensities, the effective detuning, the effective coupling strength of the cavity field with the Bogoliubov mode are used to control the transmission intensity of the probe field and the dimensionless amplitude of the SS.
In recent years, due to the rapid development of nano science and advanced semiconductor technology, one is able to observe more significant quantum optomechanical effects as optomechanical system turns smaller in size. Optomechanically induced transparency, fast and slow light, optical storage as well as other quantum optical and nonlinear optical effects have become the focus of research. On the other hand, the optomechanical systems coupled to other small subsystems (such as atoms, quantum dots, single electron transistors, etc.) also attract great attention in research. This is because the coupling system has not only provided more degrees of freedom for quantum manipulation, but also opened up more channels for classical and quantum information transfer. In this paper we study the optomechanically induced transparency and fast/slow light phase control in atom-assisted optomechanical cavity. Unlike the traditional systems, in this model the mechanical resonator is directly driven by a weak auxiliary driving field. We therefore find that with the change of amplitude ratio and phase difference between the auxiliary driving field and the probe field, the absorption and dispersion properties of the whole system and the group delay time vary accordingly. In the absence of auxiliary field, we observe the spectral features of the hybrid electromagnetically induced transparency and optomechanically induced transparency (OMIT) in an atom-cavity-oscillator tripartite optomechanical system. When there exists no phase difference between the auxiliary field and the probe field, we find that the membrane resonance absorption is enhanced with the increase of auxiliary field strength at resonance, causing the the optomechanically induced transparency to be suppressed, and therefore we can modify the amplitude of auxiliary field to control the depth of the OMIT window. When keeping amplitude ratio between the auxiliary field and the probe field unchanged, the modification of the phase difference between the auxiliary field and the probe field directly affects the we can not only realize the manipulation of OMIT window depth, but also control the transformation of tunable optical switch among "absorption", "transparent" and "gain" of the system. Therefore, through changing the phase of auxiliary field and probe field, we can not only realize the manipulation of OMIT window depth, but also control the transformation of tunable optical switch among "absorption" , "transparent" and "gain". In the meantime, we find that the system’s group delay time varies periodically with the change of phase difference. It is worth noting that by adjusting the phase difference and the atomic number, we can not only change the magnitude of the group delay, but also realize the conversion between slow light and fast light effect.
Abstract We investigate the optical-response properties of a coherent-mechanical pumped optomechanical system (OMS) coupled to a Λ-type three-level atomic ensemble. Due to the optomechanical and the cavity-atom couplings, the optomechanically induced transparency (OMIT) and electromagnetically induced transparency (EIT) phenomena could both be observed from our proposal. In the presence of a coherent mechanical pump, we show that the OMIT behavior of the probe field exhibits a phase-dependent effect, leading to the switch from OMIT to optomechanically induced absorption or amplification, while the feature of EIT remains unchanged. The distinctly different effects of the mechanical pump on OMIT and EIT behavior assure us that the absorption (amplification) and transparency of the output probe field can be simultaneously observed. Moreover, a tunable switch from slow to fast light can also be realized by tuning the phase and amplitude of the mechanical pump. In particular, the presence of the atomic ensemble can further adjust the group delay, providing additional flexibility for achieving the tunable switch.
We propose a novel technique of generating multiple optomechanically induced transparency (OMIT) of a weak probe field in hybrid optomechanical system. This system consists of a cigar-shaped Bose–Einstein condensate (BEC), trapped inside each high finesse Fabry-Pérot cavity. In the resolved sideband regime, the analytic solutions of the absorption and the dispersion spectrum are given. The tunneling strength of the two resonators and the coupling parameters of the each BEC in combination with the cavity field have the appearance of three distinct OMIT windows in the absorption spectrum. Furthermore, whether there is BEC in each cavity is a key factor in the number of OMIT windows determination. The technique presented may have potential applications in quantum engineering and quantum information networks.