Quantum teleportation is the most basic quantum protocol that transfers quantum states between two parties via sharing of quantum entanglement, measurements, and feedforward operations. At first glance, quantum teleportation is simply an identity operation that does not change the quantum states. Quantum teleportation, however, forms the basis for a paradigm of quantum computation called measurement-based quantum computation (MBQC). In the first half of this chapter, we describe continuous-variable (CV) quantum teleportation. In the second half, we explain how to use quantum teleportation in MBQC. There are two important concepts regarding MBQC: cluster state and gate teleportation. Cluster state is a multipartite entangled state that can be used for CV quantum computation, given that we can implement appropriate measurements and feedforward operations on it. Gate teleportation, on the other hand, is a concept that we can “teleport” non-Gaussian operations on the resource state to the input state.
Quantum teleportation is the most basic quantum protocol that transfers quantum states between two parties via sharing of quantum entanglement, measurements, and feedforward operations. At first glance, quantum teleportation is simply an identity operation that does not change the quantum states. Quantum teleportation, however, forms the basis for a paradigm of quantum computation called measurement-based quantum computation (MBQC). In the first half of this chapter, we describe continuous-variable (CV) quantum teleportation. In the second half, we explain how to use quantum teleportation in MBQC. There are two important concepts regarding MBQC: cluster state and gate teleportation. Cluster state is a multipartite entangled state that can be used for CV quantum computation, given that we can implement appropriate measurements and feedforward operations on it. Gate teleportation, on the other hand, is a concept that we can “teleport” non-Gaussian operations on the resource state to the input state.
The Measurement Based Quantum Computation (MBQC) model achieves universal quantum computation by employing projective single qubit measurements with classical feedforward on a highly entangled multipartite cluster state. Rapid advances in improving scalability of quantum computing systems have enabled the generation of large cluster states for implementing MBQC on various platforms. This review focuses on three such efforts, each utilizing a different quantum computing technology viz., superconducting qubits, trapped ion qubits and squeezed photon states. MBQC is being increasingly employed on optical platforms which can generate large entangled resource states but lack the ability to perform deterministic entangling gates.
Quantum computers, leveraging the principles of quantum mechanics, hold the potential to surpass classical computers in numerous applications, with implications across various domains. Besides the well-known gate model, Measurement-based Quantum Computation (MBQC) is another promising computational approach to achieve universal quantum computation. In MBQC, large ensembles of qubits are prepared in a highly entangled cluster state, forming the basis for executing quantum computations through sequential measurements. Cluster states are realized using both continuous variables (CV) and discrete variables (DV) techniques. In the CV-based methods, Frequency Domain Multiplexing (FDM), Time Domain Multiplexing (TDM), Spatial Domain Multiplexing (SDM), and hybrid schemes are employed. This paper thoroughly discusses and compares these approaches, elucidating their strengths and limitations. Additionally, the generation of photonic cluster states in DV is explored and some recent results are reported. Some recent state-of-the-art advancements in photonic and superconducting qubits entanglement, which can potentially serve as cluster states, are also presented. Finally, we highlight the approach that exhibits the most promising characteristics for achieving efficient cluster state realization in the context of MBQC.
Bennett and his team pioneered the quantum teleportation protocol, a breakthrough where Alice transmits quantum information to Bob through a pre-shared entangled quantum channel. Remarkably, this transmission occurs without physically moving the information, relying on a combination of classical communication and quantum entanglement. This protocol not only demonstrates the essence of quantum entanglement but also underscores its potential in the realm of information transfer. The success of quantum teleportation experiments extends across various physical systems, with a particular emphasis on achieving effectiveness over long distances. Looking forward, future developments in this field may lead to multi-party protocols, thereby advancing both quantum communication and computing capabilities. A crucial component in quantum teleportation networks is controlled quantum teleportation (CQT), holding significant promise for the emerging concept of the quantum internet. In the preceding chapter, our exploration centered on the practical application of quantum teleportation protocols, with a specific focus on two key approaches: standard quantum teleportation and CQT. Our examination delved into the fundamental principles of quantum teleportation, encompassing critical concepts such as quantum entanglement, non-cloning, superposition, and the importance of measurements like fidelity. Throughout the chapter, we dedicated special attention to both the theoretical and experimental aspects of quantum teleportation, considering the intricacies of systems with continuous variables (CVs) as well as those with discrete variables (DVs).
The last two decades have witnessed the rapid growth of quantum information processing as an active field of multidisciplinary science and technology. Tremendous theoretical and experimental progress has been made in quantum communication and quantum computation, and it seems clear that some of this progress will soon result in practical applications outside the laboratory. Quantum computation aims to build a quantum computer and to explore the origins and limits of quantum computing power. The original circuit model of a quantum computer, due to Deutsch, has a strong formal similarity with the circuit model of a classical computer. Both models depict a computation as processing via the wiring of a number of fiducial gates, each of which dynamically couples a small number of input (qu)bits in a controlled manner. In other words, unitary evolution is the basic mechanism of information processing in the circuit model of quantum computers. Starting with a given fixed state of many qubits, measurement based quantum computation (MBQC) processes information by applying a sequence of measurements to designated qubits in designated bases. This is remarkable, given the probabilistic nature of quantum measurement and the murky physical status of the dynamics of 'wavefunction collapse'. The final result of the computation is determined from the classical data of all the measurement outcomes. There exist two principle models: the teleportation based model and the 'one-way quantum computer' of 'cluster state computation'. The formalism of cluster states has proven to be a powerful way of describing the essential entanglement resources needed to perform quantum information processing. Unlike the circuit model, the MBQC models have no natural classical counterpart. There are a number of physical architectures for which measurements on the relevant systems are more easily performed than controlled unitary evolution. Moreover, it appears the MBQC models can offer novel computational benefits, especially regarding issues of fault-tolerance and parallelizability of algorithms. As a result, the theory of MBQC is now shaping the latest experimental proposals across the full spectrum of quantum information processing technologies. Naturally, understanding the scope of measurement based quantum computation is also yielding many insights into what is necessary (as opposed to merely sufficient) for us to harness the power of quantum computers. Quantum communication aims to offer efficient and secure ways of information exchange, directly based on quantum mechanics. Photons serve as natural information carriers, owing to their robustness against decoherence. A major problem for photonic communication systems is due to photon loss. It turns out that this difficulty can be overcome by the quantum repeater, a measurement-based technique. The basic idea is to divide the transmission channel into many segments and perform some quantum measurement on each segment. Additional measurement-based protocols and technologies have also been demonstrated to improve the quality of quantum communication, such as entanglement swapping and purification. The articles in this invited Focus Issue cover topics both in measurement-based quantum communication and computation, but the emphasis is given to quantum computation. A significant number of articles deal with the preparation of cluster states, the experimental realization of a one-way quantum computer, and the associated efficiency and benefits. We hope that you will find that some of these new results are of interest to you, and further hope that the issue will increase your interest in this interdisciplinary research field if you are a non-expert. Focus on Measurement-Based Quantum Information Processing Contents A proof-of-principle experiment of eliminating photon-loss errors in cluster states Wei-Bo Gao, Xiao-Qi Zhou, Jin Zhang, Tao Yang and Jian-Wei Pan Continuous variable multipartite entanglement and optical implementations of quantum communication networks Yimin Lian, Changde Xie and Kunchi Peng Generalized flow and determinism in measurement-based quantum computation Daniel E Browne, Elham Kashefi, Mehdi Mhalla and Simon Perdrix The entanglement of the four-photon cluster state C Schmid, N Kiesel, W Wieczorek and H Weinfurter Optical zeno gate: bounds for fault tolerant operation Patrick M Leung and Timothy C Ralph Towards experimental entanglement connection with atomic ensembles in the single excitation regime Julien Laurat, Chin-wen Chou, Hui Deng, Kyung Soo Choi, Daniel Felinto, Hugues de Riedmatten and H J Kimble Towards minimal resources of measurement-based quantum computation Simon Perdrix Experimental realization of a quantum game on a one-way quantum computer Robert Prevedel, Andre Stefanov, Philip Walther and Anton Zeilinger Fundamentals of universality in one-way quantum computation M Van den Nest, W Dur, A Miyake and H J Briegel Loss tolerant linear optical quantum memory by measurement-based quantum computing Michael Varnava, Daniel E Browne and Terry Rudolph Graph state generation with noisy mirror-inverting spin chains Stephen R Clark, Alexander Klein, Martin Bruderer and Dieter Jaksch One-way quantum computing in adecoherence-free subspace M S Tame, M Paternostro and M S Kim Cluster state preparation using gates operating at arbitrary success probabilities K Kieling, D Gross and J Eisert Topological fault-tolerance in cluster state quantum computation R Raussendorf, J Harrington and K Goyal Strategies for the preparation of large cluster states using non-deterministic gates Peter P Rohde and Sean D Barrett A repeat-until-success quantum computing scheme A Beige, Y L Lim and L C Kwek Efficient growth of complex graph states via imperfect path erasure Earl T Campbell, Joseph Fitzsimons, Simon C Benjamin and Pieter Kok Investigation of a single-photon source based on quantum interference T B Pittman, J D Franson and B C Jacobs Entanglement and local information access for graph states Damian Markham, Akimasa Miyake and Shashank Virmani The efficiencies of generating cluster states with weak nonlinearities Sebastien G R Louis, Kae Nemoto, W J Munro and T P Spiller A direct approach to fault-tolerance in measurement-based quantum computation via teleportation Marcus Silva, Vincent Danos, Elham Kashefi and Harold Ollivier Experimental ancilla-assisted qubit transmission against correlated noise T Yamamoto, R Nagase, J Shimamura, S K Ozdemir, M Koashi and N Imoto Terry Rudolph, Imperial College, London, UK Jian-Wei Pan, University of Science and Technology of China, Hefei, People's Republic of China and Universitat Heidelberg, Germany
Quantum teleportation is one of the most basic quantum protocols, which transfers an unknown quantum state from one location to another through local operation and classical communication by using shared quantum entanglement without physical transfer of the information carrier. And it has been widely used in various quantum information protocols such as entanglement swapping, quantum repeaters, quantum gate teleportation, quantum computation based on measurement, and quantum teleportation networks, which have important application value in quantum computation and quantum information. Quantum teleportation is a naturally bipartite process, in which an unknown quantum state can only be transmitted from one node to another. With the further development of quantum information research, it is necessary to transfer quantum states or quantum information among more and more nodes. Multipartite quantum protocols are expected to form fundamental components for larger-scale quantum communication and computation. A bipartite quantum teleportation should be extended to a multipartite protocol known as a quantum teleportation network. In this paper, a multifunctional quantum teleportation network is proposed theoretically. We first propose a special method of constructing four-partite quantum resources in continuous variables (CVs), and based on this, construct two different types of CV quantum teleportation networks. One type of network contains just one quantum teleportation process consisting of a sender, a receiver and two controllers. In this type of network, the unknown quantum state can be recovered at any other node according to the requirement after the measurement in the input node, which enriches the transfer direction and transfer mode of the unknown quantum state. And meanwhile, the two controllers can control the transfer of a quantum state from the sender to the receiver by restricting the sender and receiver’s access to their information, which makes the quantum teleportation network controllable. The other type of network has two quantum teleportation processes, each containing only a sender, a receiver and no controllers, which increases the number of quantum states that can be transmitted. Then we analyze the dependence of the fidelity of each quantum teleportation network on different physical parameters, and compare the characteristics, advantages and disadvantages among different types of quantum teleportation networks. The scheme for constructing a multifunctional quantum teleportation network in this paper shows some advantages, such as the greater number of quantum nodes, diversity of types, simple operation procedure. And all these advantages provide a broader application prospect for establishing larger and more complex quantum information networks in the future and quicken the pace of the application of quantum information.
Achieving scalability is one of the most pressing tasks to realize practical quantum computer. In this regard, continuous-variable optical systems have shown many promising progresses such as generation of enormous cluster states, resources for measurement-based quantum computation, using minimal resources. In this talk, I will explain the concepts of continuous-variable quantum computation with the focuses on the quantum computation based on quantum teleportation. It turns out that the quantum teleportation protocol, a basic protocol that is equivalent to the identity operation, contains many essences of the quantum computation. I will discuss the recent experimental progresses with the main focuses on the time-domain multiplexing approach and how these progresses are paving the path toward large-scale fault-tolerant universal quantum computation.