The Internet of Things technology is one of the important directions of Smart Grid research, involving many wireless sensors and communication facilities, and has high requirements for security. The physical layer security technology can effectively solve the security problems under wireless communication. As the most common application scenario of wireless communication is multi-node wireless network communication, group secret key (GSK) based on physical layer security and information theory security is gradually attracting investigator’s interest. In this paper, a novel physical layer GSK generation scheme based on code-domain exchange of channel information in mesh network is proposed. Instead of traditional side-information exchange in symbol-domain, error-correcting code is applied to finish information exchange and reconciliation simultaneously in code-domain. Each node processes the known channel bit sequence and then encodes it to generate a check sequence. After broadcasting the check bit sequence to other nodes, each node decodes the received check bit sequences to obtained the unknown channel information. The simulation results show that the scheme can effectively reduce the times of information exchanges while keeping a good performance including low bit error rate and low block error rate.
The Internet of Things technology is one of the important directions of Smart Grid research, involving many wireless sensors and communication facilities, and has high requirements for security. The physical layer security technology can effectively solve the security problems under wireless communication. As the most common application scenario of wireless communication is multi-node wireless network communication, group secret key (GSK) based on physical layer security and information theory security is gradually attracting investigator’s interest. In this paper, a novel physical layer GSK generation scheme based on code-domain exchange of channel information in mesh network is proposed. Instead of traditional side-information exchange in symbol-domain, error-correcting code is applied to finish information exchange and reconciliation simultaneously in code-domain. Each node processes the known channel bit sequence and then encodes it to generate a check sequence. After broadcasting the check bit sequence to other nodes, each node decodes the received check bit sequences to obtained the unknown channel information. The simulation results show that the scheme can effectively reduce the times of information exchanges while keeping a good performance including low bit error rate and low block error rate.
With the increasing demands for sharing confidential information among massive Internet of Things (IoT) devices in 5G and beyond wireless networks, many applications require the common secret key generation for a group of IoT devices. However, most of the existing works on physical layer secret key generation (PLKG) only focus on the pairwise key generation between two users, which is a low efficient and high cost to be extended to the scenarios of group key generation. In this work, we propose a new efficient multiple-input–multiple-output (MIMO) physical layer group secret key generation scheme to reduce the consumption of channel probing and improve the efficiency for group key generation. Different from current schemes, in the proposed scheme, the transmitter randomly generates the group secret key and directly broadcasts the downlink data symbols to the group users. At the receiver end, each group user can efficiently “observe” the common group key through the downlink broadcasting data symbols, while keeping perfect secrecy of the shared group key against eavesdroppers. The performance of reliability, security, and the group key generation rate is fully investigated, which shows the advantages of high efficiency, low consumption, and strong robustness of the proposed scheme. Extensive simulations are conducted to validate the effectiveness of the proposed scheme.
Physical-layer group secret-key (GSK) generation is an effective way of generating secret keys in wireless networks, wherein the nodes exploit inherent randomness in the wireless channels to generate group keys, which are subsequently applied to secure messages while broadcasting, relaying, and other network-level communications. While existing GSK protocols focus on securing the common source of randomness from external eavesdroppers, they assume that the legitimate nodes of the group are trusted. In this paper, we address insider attacks from the legitimate participants of the wireless network during the key generation process. Instead of addressing conspicuous attacks such as switching-off communication, injecting noise, or denying consensus on group keys, we introduce stealth attacks that can go undetected against state-of- the-art GSK schemes. We propose two forms of attacks, namely: (i) different-key attacks, wherein an insider attempts to generate different keys at different nodes, especially across nodes that are out of range so that they fail to recover group messages despite possessing the group key, and (ii) low-rate key attacks, wherein an insider alters the common source of randomness so as to reduce the key-rate. We also discuss various detection techniques, which are based on detecting anomalies and inconsistencies on the channel measurements at the legitimate nodes. Through simulations we show that GSK generation schemes are vulnerable to insider-threats, especially on topologies that cannot support additional secure links between neighbouring nodes to verify the attacks.
Wireless networks are vulnerable to various attacks due to their open nature, making them susceptible to eavesdropping and other security threats. Eavesdropping attack takes place at the physical layer. Traditional wireless network security relies on cryptographic techniques to secure data transmissions. However, these techniques may not be suitable for all scenarios, especially in resource-constrained environments such as wireless sensor networks and adhoc networks. In these networks having limited power resources, generating cryptographic keys between mobile entities can be challenging. Also, the cryptographic keys are computationally complex and require key management infrastructure. Physical Layer Key Generation (PLKG) is an emerging solution to address these challenges. It establishes secure communication between two users by taking advantage of the wireless channel's inherent features. PLKG process involves channel probing, quantization, information reconciliation (IR) and privacy amplification to generate symmetric secret key. The researchers have used various PLKG techniques to get the secret key, sTop of Form till they face problems in the IR scheme to obtain symmetric keys between the users who share the same channel for communication. Both the code based and protocol based methods proposed in the literature have advantages and limitations related to their performance parameters such as information leakage, interaction delay and computation complexity. This research work proposes a novel IR mechanism that combines the protocol and code-based error correction methods to obtain reduced Bit Mismatch Rate (BMR), reduced information leakage, reduced interaction delay, and reduced computational time to enhance physical layer secret key's quality. In the proposed research work, the channel samples are generated using the Received Signal Strength (RSS) and Channel Impulse Response (CIR) parameters. These samples are quantized using Vector Quantization with Affinity Propagation Clustering (VQAPC) method to generate the preliminary key. The samples collected by the two users who wish to communicate, (for example Alice and Bob) will be different due to noise in the channel and hardware limitations. Hence their preliminary keys will be different. Removing this discrepancy between Bob's and Alice's initial keys, using novel Hybrid Protocol and Code related Information Reconciliation (HPC-IR) scheme to generate error corrected key, is the most important contribution of this research work. This key is further encoded by the MD5 hash function to generate a final secret key for exchanging information between two users over the wireless channel. It is observed that the proposed HPC-IR scheme achieves BMR of 19.4%, information leakage is 0.002, interaction delay is 0.001 seconds and computation time is 0.02 seconds.
Secret group key generation based on physical layer in wireless communications has a lot of practical applications. A few studies focused on the theoretical bounds of the secret key rate based on the sets of received signals rather than a particular secret key generation scheme. We propose a secret group key generation scheme for an arbitrary number of legitimate nodes, n, in mesh topology in the presence of a passive eavesdropper. In the scheme, after general pilot signal transmissions at all nodes, each node broadcasts a weighted combination of its received signals with optimized coefficients, so that legitimate nodes can obtain the information of channels used for group key generation while the eavesdropper cannot. We also apply different quantization schemes for quantizing and encoding the estimated channels into keys. To provide detailed transmissions and processing steps of group key generation, we also describe the proposed scheme for 4-node mesh topology case. The simulation results show that the proposed scheme achieves a higher secret group key rate and a lower key disagreement rate than a benchmark scheme.
Secret group key generation based on physical layer in wireless communications has a lot of practical applications. A few studies focused on the theoretical bounds of the secret key rate based on the sets of received signals rather than a particular secret key generation scheme. We propose a secret group key generation scheme for an arbitrary number of legitimate nodes, n, in mesh topology in the presence of a passive eavesdropper. In the scheme, after general pilot signal transmissions at all nodes, each node broadcasts a weighted combination of its received signals with optimized coefficients, so that legitimate nodes can obtain the information of channels used for group key generation while the eavesdropper cannot. We also apply different quantization schemes for quantizing and encoding the estimated channels into keys. To provide detailed transmissions and processing steps of group key generation, we also describe the proposed scheme for 4-node mesh topology case. The simulation results show that the proposed scheme achieves a higher secret group key rate and a lower key disagreement rate than a benchmark scheme.
The increasing use of Internet of Things (IoT) also make data security a very importance. Traditional cryptographic methods are often unsuitable for IoT due to limited processing power and memory capacity, creating a need for lightweight yet effective security solutions. Physical Layer Key Generation (PLKG) offers a promising approach by utilizing the unique characteristics of wireless communication channels to generate secret keys without overloaded system demands. This paper show a performance analysis of Group Secret Key Generation in outdoor environments. The challenges are interfrence, physical obstacles, and dynamic changes in the communication channel was also the part of this analysis. The test results show that group secret key generation achieved optimal performance in Scenario 2, which given a correlation coefficient of 63 %, indicating strong channel similarity between nodes and a bit retention rate of 97.9 % after quantization and error correction. Scenarios 1, 3, and 4 also show a good performance, with correlation coefficients of41%,14%, and 35 %, and corresponding bit retention rates of93.1%,90.9%, and 95.2 %, on each tests. All scenarios successfully met the entropy thresholds required for cryptographic applications, which include that randomness and security of the generated keys was confirmed.