We discuss quantum imaging protocols and their possible application in remote sensing and Earth Observation. In particular, we shall focus on a novel quantum imaging protocol, named Correlation Plenoptic Imaging (CPI), which exploits the spatio-temporal correlations of light to perform 3D imaging and refocusing of out-of-focus objects, while maintaining the highest possible resolution, and offering the possibility of turbulence attenuation.
We discuss quantum imaging protocols and their possible application in remote sensing and Earth Observation. In particular, we shall focus on a novel quantum imaging protocol, named Correlation Plenoptic Imaging (CPI), which exploits the spatio-temporal correlations of light to perform 3D imaging and refocusing of out-of-focus objects, while maintaining the highest possible resolution, and offering the possibility of turbulence attenuation.
We aim at developing novel imaging instruments that exploit the intrinsic spatio-temporal correlations of astronomical light sources to bring the quantum advantage in space imaging. These novel instruments differ from standard imaging systems in the way images are retrieved. Conventional images are obtained from direct measurement of the intensity of light coming from the object of interest and recorded by a sensor. Here, instead, we first register optical intensities on two disjoint sensors, and then measure correlations between them. After a brief overview on the state of the art of quantum imaging for space objects, we describe the working principle of Correlation Plenoptic Imaging, which enables to perform 3D imaging and refocusing of out-of-focus objects, and a possible application to satellite imaging.
We review the advancement of the research toward the design and implementation of quantum plenoptic cameras, radically novel 3D imaging devices that exploit both momentum–position entanglement and photon–number correlations to provide the typical refocusing and ultra-fast, scanning-free, 3D imaging capability of plenoptic devices, along with dramatically enhanced performances, unattainable in standard plenoptic cameras: diffraction-limited resolution, large depth of focus, and ultra-low noise. To further increase the volumetric resolution beyond the Rayleigh diffraction limit, and achieve the quantum limit, we are also developing dedicated protocols based on quantum Fisher information. However, for the quantum advantages of the proposed devices to be effective and appealing to end-users, two main challenges need to be tackled. First, due to the large number of frames required for correlation measurements to provide an acceptable signal-to-noise ratio, quantum plenoptic imaging (QPI) would require, if implemented with commercially available high-resolution cameras, acquisition times ranging from tens of seconds to a few minutes. Second, the elaboration of this large amount of data, in order to retrieve 3D images or refocusing 2D images, requires high-performance and time-consuming computation. To address these challenges, we are developing high-resolution single-photon avalanche photodiode (SPAD) arrays and high-performance low-level programming of ultra-fast electronics, combined with compressive sensing and quantum tomography algorithms, with the aim to reduce both the acquisition and the elaboration time by two orders of magnitude. Routes toward exploitation of the QPI devices will also be discussed.
We review the advancement of the research toward the design and implementation of quantum plenoptic cameras, radically novel 3D imaging devices that exploit both momentum-position entanglement and photon-number correlations to provide the typical refocusing and ultra-fast, scanning-free, 3D imaging capability of plenoptic devices, along with dramatically enhanced performances, unattainable in standard plenoptic cameras: diffraction-limited resolution, large depth of focus, and ultra-low noise. To further increase the volumetric resolution beyond the Rayleigh diffraction limit, and achieve the quantum limit, we are also developing dedicated protocols based on quantum Fisher information. However, for the quantum advantages of the proposed devices to be effective and appealing to end-users, two main challenges need to be tackled. First, due to the large number of frames required for correlation measurements to provide an acceptable SNR, quantum plenoptic imaging would require, if implemented with commercially available high-resolution cameras, acquisition times ranging from tens of seconds to a few minutes. Second, the elaboration of this large amount of data, in order to retrieve 3D images or refocusing 2D images, requires high-performance and time-consuming computation. To address these challenges, we are developing high-resolution SPAD arrays and high-performance low-level programming of ultra-fast electronics, combined with compressive sensing and quantum tomography algorithms, with the aim to reduce both the acquisition and the elaboration time by two orders of magnitude. Routes toward exploitation of the QPI devices will also be discussed.
Plenoptic imaging is a novel optical technique for three-dimensional imaging in a single shot. It is enabled by the simultaneous measurement of both the location and the propagation direction of light in a given scene. In the standard approach, the maximum spatial and angular resolutions are inversely proportional, and so are the resolution and the maximum achievable depth of focus of the 3D image. We have recently proposed a method to overcome such fundamental limits by combining plenoptic imaging with an intriguing correlation remote-imaging technique: ghost imaging. Here, we theoretically demonstrate that correlation plenoptic imaging can be effectively achieved by exploiting the position-momentum entanglement characterizing spontaneous parametric down-conversion (SPDC) photon pairs. As a proof-of-principle demonstration, we shall show that correlation plenoptic imaging with entangled photons may enable the refocusing of an out-of-focus image at the same depth of focus of a standard plenoptic device, but without sacrificing diffraction-limited image resolution.
We will show that photon correlations can be employed to overcome the typical limitations of conventional plenoptic imaging devices, thus leading to quantum-enhanced plenoptic imaging. In particular, we will show an unprecedented combination of resolution and depth of field combined with refocusing capability and depth extension. We will show experimental results obtained in different application scenarios, ranging from microscopy to photography-like protocols. Significant advances in acquisition speed will also be discussed, as achieved by both hardware (e.g., use of SPAD arrays, as opposed to common CMOS and CCD cameras) and software (e.g., compressive sensing, quantum tomography) solutions.
We introduce a new generation of 3D imaging devices based on quantum plenoptic imaging. Position-momentum entanglement and photon number correlations are exploited to provide a scan-free 3D image after post-processing of the collected light intensity signal. We explore the steps toward designing and implementing quantum plenop- tic cameras with dramatically improved performances, unattainable in standard plenoptic cameras, such as diffraction-limited resolution, large depth of focus, and ultra-low noise. However, to make these new types of devices attractive to end-users, two main challenges need to be tackled: the reduction of the acquisition times, that for the commercially available high-resolution cameras would be from tens of seconds to a few minutes, and a speed-up in processing the large amount of data that are acquired, in order to retrieve 3D reconstructions or refocused 2D images. To address these challenges, we are employing high-resolution SPAD (single photon avalanche diode) arrays and high-performance low-level programming of ultra-fast electronics, combined with compressive sensing and quantum tomography algorithms, with the aim of reducing both the acquisition and the elaboration time by one or possibly two orders of magnitude. Moreover, in order to achieve the quantum limit and further increase the volumetric resolution beyond the Rayleigh diffraction limit, we explored dedicated pro- tocols based on quantum Fisher information. Finally, we discuss how this new generation of quantum plenoptic devices could be exploited in different fields of research, such as 3D microscopy and space imaging.