Spin Systems and Cavity Modes

Chuanzhou Zhu, Lin Dong, Han Pu

Yujiro Eto, Atsushi Noguchi, Peng Zhang +2 more

We report the implementation of projective measurement on a single 1/2 nuclear spin of the (171)Yb atom by measuring the polarization of cavity-enhanced fluorescence. To obtain cavity-enhanced fluorescence having a nuclear-spin-dependent polarization, we construct a two-mode cavity QED system, in which two cyclic transitions are independently coupled to each of the orthogonally polarized cavity modes, by manipulating the energy level of (171)Yb. This system can associate the nuclear spin degrees of freedom with the polarization of photons, which will facilitate the development of hybrid quantum systems.

Roman Ovsiannikov, Kurt Jacobs, Andrii G. Sotnikov +2 more

We introduce an implementation of a non-degenerate parametric amplifier in which the signal and idler modes, respectively, a microwave mode and an ensemble of spins (e.g., nitrogen-vacancy centers in diamond), are operated in their linear regime. This paramp, which amplifies signals in both parts at room and cryogenic temperatures, can be used to generate both the two-mode and single-mode squeezing of either system. It requires merely modulating the frequency of the spin ensemble at the sum of the cavity and spin frequencies (providing the classical pump) with the two systems sufficiently detuned. This effect is remarkable given that modulating a spin ensemble by itself produces neither amplification nor squeezing, unlike modulating an oscillator, and that an off-resonant perturbative analysis would suggest that modulating the spin ensemble merely parametrically drives the cavity mode. With typical cavity parameters including a cavity quality factor~$Q=10^4$, and a 1 GHz modulation amplitude, the microwave signal can be amplified by approximately $18~\mbox{dB}$ in $1.7~\mbox{$μ$s}$, with a resonant bandwidth of about $0.5~\mbox{MHz}$. At $10~\mbox{mK}$ with the same modulation amplitude and a cavity and spin $Q=5\times 10^4$ it generates approximately $5~\mbox{dB}$ of squeezing. We also examine the experimental requirements for implementation.

Stefanie Czischek

R.T. Ovsiannikov, Kurt A. Jacobs, Andrii Sotnikov +2 more

Abstract We introduce an implementation of a non-degenerate parametric amplifier in which the signal and idler modes, respectively, a microwave mode and an ensemble of spins (e.g., nitrogen-vacancy centers in diamond), are operated in their linear regime. This paramp, which amplifies signals in both parts at room and cryogenic temperatures, can be used to generate both the two-mode and single-mode squeezing of either system. It requires merely modulating the frequency of the spin ensemble at the sum of the cavity and spin frequencies (providing the classical pump) with the two systems sufficiently detuned. This effect is remarkable given that modulating a spin ensemble by itself produces neither amplification nor squeezing, unlike modulating an oscillator, and that an off-resonant perturbative analysis would suggest that modulating the spin ensemble merely parametrically drives the cavity mode. With typical cavity parameters including a cavity quality factor Q = 10<4/sup>, and a 1 GHz modulation amplitude, the microwave signal can be amplified by approximately 18 dB in 1.7 μs, with a resonant bandwidth of about 0.5 MHz. At 10 mK with the same modulation amplitude and a cavity and spin Q = 5×10<4sup> it generates approximately 5 dB of squeezing. We also examine the experimental requirements for implementation.