Multiport interferometer meshes can be used to implement unitary transformations on input vectors of light in both the classical and quantum domain. In practice, the phase-shifters in a mesh photonic circuit must be calibrated to compensate for phase errors due to fabrication variations. Calibration using photodetectors external to the mesh has been demonstrated for triangular meshes, but not rectangular meshes. Here, we propose an algorithm for the calibration of rectangular meshes using only external photodetectors and simulate it to evaluate its feasibility.
Multiport interferometer meshes can be used to implement unitary transformations on input vectors of light in both the classical and quantum domain. In practice, the phase-shifters in a mesh photonic circuit must be calibrated to compensate for phase errors due to fabrication variations. Calibration using photodetectors external to the mesh has been demonstrated for triangular meshes, but not rectangular meshes. Here, we propose an algorithm for the calibration of rectangular meshes using only external photodetectors and simulate it to evaluate its feasibility.
Multiport interferometers based on integrated beamsplitter meshes are widely used in photonic technologies. While the rectangular mesh is favored for its compactness and uniformity, its geometry resists conventional self-configuration approaches, which are essential to programming large meshes in the presence of fabrication error. Here, we present a configuration algorithm, related to the $2\ifmmode\times\else\texttimes\fi{}2$ block decomposition of a unitary matrix, that overcomes this limitation. Our proposed algorithm is robust to errors, requires no prior knowledge of the process variations, and relies only on external sources and detectors. We show that self-configuration using this technique reduces the effect of fabrication errors by the same quadratic factor observed in triangular meshes. This relaxes a significant limit to the size of multiport interferometers, removing a major roadblock to the scaling of optical quantum and machine-learning hardware.
Universal multiport interferometers, which can be programmed to implement any linear transformation between multiple channels, are emerging as a powerful tool for both classical and quantum photonics. These interferometers are typically composed of a regular mesh of beam splitters and phase shifters, allowing for straightforward fabrication using integrated photonic architectures and ready scalability. The current, standard design for universal multiport interferometers is based on work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)PRLTAO0031-900710.1103/PhysRevLett.73.58]. We demonstrate a new design for universal multiport interferometers based on an alternative arrangement of beam splitters and phase shifters, which outperforms that by Reck et al. Our design requires half the optical depth of the Reck design and is significantly more robust to optical losses.
Programmable photonic interferometer meshes enable reconfigurable linear optical transformations, but their performance depends critically on accurate calibration of Mach-Zehnder interferometers and phase shifters. Conventional methods often require node isolation, dedicated routing paths, orthogonal training states, reference channels, or prior phase-voltage characterization, which become increasingly difficult in large thermally tuned meshes.
We introduce a local variance-based self-calibration method using intensity-only measurements. Controlled phase perturbations are applied, and calibration points are identified from minima of the measured output-power variance. For Mach-Zehnder interferometers, the variance follows a characteristic |sin(theta)| dependence, allowing bar and cross operating points to be found without conventional node isolation. For phase shifters, balanced interference produces a complementary |cos(phi)| variance signature, enabling quadrature calibration through the same statistical principle.
We validate the method experimentally on an 8 x 8 silicon nitride programmable photonic processor using a fully automated two-stage procedure. Starting from random phase settings, all Mach-Zehnder interferometers are calibrated first, followed by phase-shifter calibration under balanced-interference conditions. As a system-level test, we implement an embedded 4 x 4 Hadamard transformation on the 8 x 8 processor using a Clements decomposition.
These results establish local output variance as a simple calibration observable for programmable photonic meshes. The method is compatible with discrete random phase ensembles and requires neither conventional node isolation nor orthogonal training fields, making it a practical calibration primitive for scalable self-stabilizing photonic processors.
Realistic multiport interferometers (beamsplitter meshes) are sensitive to component imperfections, and this sensitivity increases with size. Self-configuration techniques can be employed to correct these imperfections, but not all techniques are equal. This paper highlights the importance of algorithmic stability in self-configuration. Na\"{\i}ve approaches based on sequentially setting matrix elements are unstable and perform poorly for large meshes, while techniques based on power ratios perform well in all cases, even in the presence of large errors. Based on this insight, we propose a self-configuration scheme for triangular meshes that requires only external detectors and works without prior knowledge of the component imperfections. This scheme extends to the rectangular mesh by adding a single array of detectors along the diagonal.
A large number of applications in classical and quantum photonics require the capability of implementing arbitrary linear unitary transformations on a set of optical modes. In a seminal work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)10.1103/PhysRevLett.73.58], it was shown how to build such multiport universal interferometers with a mesh of beam splitters and phase shifters, and this design became the basis for most experimental implementations in the last decades. However, the design of Reck et al. is difficult to scale up to a large number of modes, which would be required for many applications. Here we present a deterministic algorithm that can find an exact and efficient implementation of any unitary transformation, using only Fourier transforms and phase masks. Since Fourier transforms and phase masks are routinely implemented in several optical setups and they do not suffer from some of the scalability issues associated with building extensive meshes of beam splitters, we believe that our design can be useful for many applications in photonics.
A large number of applications in classical and quantum photonics require the capability of implementing arbitrary linear unitary transformations on a set of optical modes. In a seminal work by Reck et al. it was shown how to build such multiport universal interferometers with a mesh of beam splitters and phase shifters, and this design became the basis for most experimental implementations in the last decades. However, the design of Reck et al. is difficult to scale up to a large number of modes, which would be required for many applications. Here we present a constructive proof that it is possible to realize a multiport universal interferometer on N modes with a succession of 6N Fourier transforms and 6N+1 phase masks, for any even integer N. Furthermore, we provide an algorithm to find the correct succesion of Fourier transforms and phase masks to realize a given arbitrary unitary transformation. Since Fourier transforms and phase masks are routinely implemented in several optical setups and they do not suffer from the scalability issues associated with building extensive meshes of beam splitters, we believe that our design can be useful for many applications in photonics.