Travelling wave parametric amplifiers (TWPAs) made from highly nonlinear reactive superconducting thin films have been demonstrated to be a viable technology for various quantum applications, including fundamental physics experiments such as astronomy and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. In this paper, we present the design of a kinetic inductance TWPA comprising a patterned titanium nitride film that can operate at 0.3K to demonstrate the feasibility of operation closer to 1K temperature, paving the way to achieve even higher bath temperature operation. We discuss in detail the design of our TWPA, along with the predicted gain-bandwidth product and other characteristics. We perform the preliminary experimental investigation of the thin film properties and compare that with the simulated results. We found that there are several discrepancies between the measured and the predicted behaviour of the thin film. We attribute these differences to the fact that the fabricated thin film has a different gap voltage, resistivity and thickness to what we expected. With a new set of estimated parameters, we successfully reproduce the measured transmission profile. We further show that by utilising bridges to ensure equipotential grounds for the CPW lines, we are able to reduce the rippling effect and achieve a higher gain with broader bandwidth. We expect that our TWPA can achieve higher than 20 dB gain from approximately 0–8 GHz.
Travelling wave parametric amplifiers (TWPAs) made from highly nonlinear reactive superconducting thin films have been demonstrated to be a viable technology for various quantum applications, including fundamental physics experiments such as astronomy and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. In this paper, we present the design of a kinetic inductance TWPA comprising a patterned titanium nitride film that can operate at 0.3K to demonstrate the feasibility of operation closer to 1K temperature, paving the way to achieve even higher bath temperature operation. We discuss in detail the design of our TWPA, along with the predicted gain-bandwidth product and other characteristics. We perform the preliminary experimental investigation of the thin film properties and compare that with the simulated results. We found that there are several discrepancies between the measured and the predicted behaviour of the thin film. We attribute these differences to the fact that the fabricated thin film has a different gap voltage, resistivity and thickness to what we expected. With a new set of estimated parameters, we successfully reproduce the measured transmission profile. We further show that by utilising bridges to ensure equipotential grounds for the CPW lines, we are able to reduce the rippling effect and achieve a higher gain with broader bandwidth. We expect that our TWPA can achieve higher than 20 dB gain from approximately 0–8 GHz.
Background Kinetic inductance travelling-wave parametric amplifiers (KITWPAs) have proven effective in achieving high gain over broad bandwidths whilst achieving near quantum-limited noise performance, properties which are extremely important for many ultra-sensitive experiments such as radio/millimetre/sub-millimetre astronomy, neutrino mass experiments, and axion dark matter searches, as well as commercial applications like quantum computational and communication systems. Methods This paper introduces the preliminary experimental exploration of an alternative KITWPA utilising thin titanium nitride (TiN) films as opposed to the conventionally used niobium titanium nitride (NbTiN) films. TiN films exhibit properties that could be advantageous for KITWPA operation, owing to its controllable critical temperature (T c) and physical robustness, hence KITWPAs fabricated from TiN films have the potential to replace NbTiN-based TWPAs for various applications, such as reducing the high pump power required to drive a NbTiN TWPA. Our TiN-based KITWPA devices were designed and fabricated with a 42 cm long coplanar waveguide transmission line patterned into a 100 nm thick TiN film, wound in a double spiral fashion to fit into a 2.2×2.2 cm chip. Results We successfully achieved broadband performance, with the best device displaying a peak averaged gain of ~5 dB with a bandwidth of ~3–13 GHz, making this one of the first broadband gain measurements of a TiN KITWPA reported in the literature. Despite this, the measured gain in all batches was lower than simulated due unexpected additional loss mechanisms. Conclusions The preliminary results presented here suggest that TiN films are suitable for KITWPA operation, although further investigation is required to improve the gain performance.
Travelling wave parametric amplifiers (TWPAs) made from highly non-linear reactive superconducting thin films have been demonstrated to be a potentially viable quantum-noise-limited amplifier technology for various fundamental physics platforms, including microwave/mm/sub-mm astronomy, dark matter search experiments, neutrino mass experiments, and qubit readout. We present a kinetic inductance TWPA consisting of a patterned titanium nitride film on a sapphire substrate, which comprises a coplanar waveguide (CPW) with a continuous, smoothed periodic loading (PL) structure that modulates the characteristic impedance of the CPW in a double sinusoidal fashion. This double sinusoidal modulation creates much stronger dispersion features than a conventional PL design, which allows for phase matching and pump harmonic suppression over a much shorter transmission length, potentially leading to reduced losses. In this paper, we shall discuss in detail the design of our TWPA and present the predicted gain-bandwidth characteristics from electromagnetic simulations.
Background: Kinetic Inductance Travelling Wave Parametric Amplifiers (KITWPAs) are a variant of superconducting amplifier that can potentially achieve high gain with quantum-limited noise performance over broad bandwidth, which is important for many ultra-sensitive experiments. In this paper, we present a novel modelling technique that can better capture the electromagnetic behaviour of a KITWPA without the translation symmetry assumption, allowing us to flexibly explore the use of more complex transmission line structures and better predict their performance. Methods: In order to design a KITWPA with optimal performance, we investigate the use of different superconducting thin film materials, and compare their pros and cons in forming a high-gain low-loss medium feasible for amplification. We establish that if the film thickness can be controlled precisely, the material used has less impact on the performance of the device, as long as it is topologically defect-free and operating within its superconducting regime. With this insight, we propose the use of Titanium Nitride (TiN) film for our KITWPA as its critical temperature can be easily altered to suit our applications. We further investigate the topological effect of different commonly used superconducting transmission line structures with the TiN film, including the effect of various non-conducting materials required to form the amplifier. Results: Both of these comprehensive studies led us to two configurations of the KITWPA: 1) A low-loss 100 nm thick TiN coplanar waveguide amplifier, and 2) A compact 50 nm TiN inverted microstrip amplifier. We utilise the novel modelling technique described in the first part of the paper to explore and investigate the optimal design and operational setup required to achieve high gain with the broadest bandwidth for both KITWPAs, including the effect of loss. Conclusions: Finally, we conclude the paper with the actual layout and the predicted gain-bandwidth product of our KITWPAs.
Background: Kinetic Inductance Travelling Wave Parametric Amplifiers (KITWPAs) are a new variant of superconducting amplifier that can potentially achieve high gain with quantum-limited noise performance over broad bandwidth, which is important for many ultra-sensitive experiments. In this paper, we present a novel modelling technique that can better capture the electromagnetic behaviour of a KITWPA without the translation symmetry assumption, allowing us to flexibly explore the use of more complex transmission line structures and better predict their performance. Methods: In order to design a KITWPA with optimal performance, we investigate the use of different superconducting thin film materials, and compare their pros and cons in forming a high-gain low-loss medium feasible for amplification. We establish that if the film thickness can be controlled precisely, the material used has less impact on the performance of the device, as long as it is topologically defect-free and operating within its superconducting regime. With this insight, we propose the use of Titanium Nitride (TiN) film for our KITWPA as its critical temperature can be easily altered to suit our applications. We further investigate the topological effect of different commonly used superconducting transmission line structures with the TiN film, including the effect of various non-conducting materials required to form the amplifier. Results: Both of these comprehensive studies led us to two configurations of the KITWPA: 1) A low-loss 100nm thick TiN coplanar waveguide amplifier, and 2) A compact 50nm TiN inverted microstrip amplifier. We utilise the novel modelling technique described in the first part of the paper to explore and investigate the optimal design and operational setup required to achieve high gain with the broadest bandwidth for both KITWPAs, including the effect of loss. Conclusions: Finally, we conclude the paper with the actual layout and the predicted gain-bandwidth product of our KITWPAs.
We present a detailed simulation and design framework for realizing traveling wave parametric amplifiers (TWPAs) using the nonlinear kinetic inductance of disordered superconductors -- in our case niobium-titanium-nitride (NbTiN). These kinetic inductance TWPAs (KITs) operate via three-wave mixing (3WM) to achieve high broadband gain and near-quantum-limited (nQL) noise. Representative fabricated devices -- realized using an inverted microstrip (IMS), dispersion-engineered, artificial transmission line -- demonstrate power gains above 25 dB, bandwidths beyond 3 GHz, and achieve ultimate system noise levels of 1.1 quanta even when operated with no magnetic shielding. These performance metrics are competitive with state-of-the-art Josephson-junction-based TWPAs but involve simpler fabrication and able to providing three orders of magnitude higher dynamic range (IIP1=−68 dBm, IIP3=−55 dBm), and high magnetic field resilience -- making KITs an attractive technology for highly multiplexed readout of quantum information and superconducting detector systems.
Abstract Superconducting travelling wave parametric amplifiers (TWPAs) exhibit great promise across various applications, owing to their broadband nature, quantum-limited noise performance, and high-gain operation. Whilst their construction is relatively simple, particularly for thin-film-based TWPAs, challenges such as the requirement for an extremely long transmission line, current fabrication limitations, and their sensitivity to fabrication tolerances, mean that their optimal operating conditions often differ from those anticipated during the design stage. As a result, manual fine-tuning of numerous operational parameters becomes necessary to recover optimal performance; a process that is both labour-intensive and time-consuming. This paper introduces an automated methodology designed to significantly accelerate the characterisation of a TWPA by several orders of magnitude without requiring human intervention. Additionally, we have developed metrics to condense the multitude of measured frequency responses of the TWPA, obtained in data cube form, into an easily-understandable format for further scientific interpretation. To demonstrate the efficacy and speed of our methodology, we utilise an existing NbTiN (niobium titanium nitride) TWPA as an example. This showcases the capability of our approach to unveil both broad- and fine-scale behaviours of the device, highlighting the importance of an automated experimental setup for the in-depth investigation of TWPAs for future developments.