Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

2021 International Applied Computational Electromagnetics Society Symposium (ACES)

RF Antenna Design for 3D Quantum Memories

Frank Deppe, Edwar Xie, Kirill G. Fedorov, Gustav Andersson, Jonathan Muller, Achim Marx, Rudolf Groß

Published Aug 1, 2021• 0 citations
Publisher

Abstract

A quantum memory has to meet the conflicting requirements of strong coupling for fast readout and weak coupling for long storage. Multimode rectangular superconducting 3D cavities are known to satisfy both properties. Here, we systematically study the external coupling to the two lowest-frequency modes of an aluminum cavity. First, we introduce a general analytical scheme to describe the capacitive coupling of the antenna pin and validate this model experimentally. On this basis, we engineer an antenna which is overcoupled to the first mode, but undercoupled to the second mode.

DOI
10.1109/aces53325.2021.00104

Related papers

Scalable 3D quantum memory

Edwar Xie, Frank Deppe, Daniel Repp +7 more

Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit both to a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. The external coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of $6$ with a $Z$-fidelity of $82\%$. We also find that this enhancement is not limited by fundamental constraints.

•Mar 13, 2018•1 citation

Compact 3D quantum memory

Edwar Xie, Frank Deppe, Michael Renger +8 more

Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well-controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit to both a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. External coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of 6 with a fidelity of approximately 80% determined via quantum process tomography. We also find that this enhancement is not limited by fundamental constraints.

arXiv:1803.04711•Applied Physics Letters•May 14, 2018•17 citations

Design, Simulation, and Experimental Validation of 3D Resonant Cavities for CryoCMOS and Superconducting Qubit Readout

Beatriz Sacramento, Ednilson Lopes, Francisco P. M. Rouxinol

Three-dimensional microwave cavities are key components for superconducting-qubit readout and for the characterization of cryogenic microwave electronics [1]. In this work, we report the design, simulation, fabrication, and experimental validation of a rectangular 3D resonant cavity targeting operation near 5.4 GHz, compatible with the frequency range of CryoCMOS voltage-controlled oscillators (VCO). The cavity dimensions were obtained from analytical mode calculations, corrected for practical machining constraints, and validated using finite-element electromagnetic simulations in ANSYS HFSS. A split-block aluminum cavity was fabricated and characterized at room temperature using vector network analysis. The measured resonances agree with analytical and simulated predictions within sub-1% deviation, confirming the accuracy of the design procedure. Different SMA connector penetration configurations were experimentally investigated to evaluate the trade-off between loaded quality factor and transmission efficiency. The asymmetric $7 \mathrm{~mm} / 8 \mathrm{~mm}$ configuration provided the best compromise, yielding a loaded quality factor of approximately 3200 and improving the transmitted signal by about 20 dB compared with the symmetric $\mathrm{7 ~ m m} / \mathrm{7 ~ m m}$ configuration. These results demonstrate a reproducible design route for 3D cavities intended for CryoCMOS testing and future superconducting-qubit readout experiments.

Symposium on Microelectronics Technology and Devices•Aug 1, 2026•0 citations

Coherent-state storage and retrieval between superconducting cavities using parametric frequency conversion

A. J. Sirois, M. A. Castellanos-Beltran, M. P. DeFeo +5 more

In superconducting quantum information, machined aluminum superconducting cavities have proven to be a well-controlled, low-dissipation electromagnetic environment for quantum circuits such as qubits. They can possess large internal quality factors, Qint > 108, and present the possibility of storing quantum information for times far exceeding those of microfabricated circuits. However, in order to be useful as a storage element, these cavities require a fast “read/write” mechanism—in other words, they require tunable coupling between other systems of interest such as other cavity modes and qubits, as well as any associated readout hardware. In this work, we demonstrate these qualities in a simple dual cavity architecture in which a low-Q “readout” mode is parametrically coupled to a high-Q “storage” mode, allowing us to store and retrieve classical information. Specifically, we employ a flux-driven Josephson junction-based coupling scheme to controllably swap coherent states between two cavities, demonstrating full, sequenced control over the coupling rates between modes.

arXiv:1503.02571•Applied Physics Letters•Apr 27, 2015•46 citations

Seamless High- Q Microwave Cavities for Multimode Circuit Quantum Electrodynamics

Srivatsan Chakram, Andrew Oriani, Ravi Naik +5 more

Multimode cavity quantum electrodynamics-where a two-level system interacts simultaneously with many cavity modes-provides a versatile framework for quantum information processing and quantum optics. Because of the combination of long coherence times and large interaction strengths, one of the leading experimental platforms for cavity QED involves coupling a superconducting circuit to a 3D microwave cavity. In this work, we realize a 3D multimode circuit QED system with single photon lifetimes of 2 ms across 9 modes of a novel seamless cavity. We demonstrate a variety of protocols for universal single-mode quantum control applicable across all cavity modes, using only a single drive line. We achieve this by developing a straightforward flute method for creating monolithic superconducting microwave cavities that reduces loss while simultaneously allowing control of the mode spectrum and mode-qubit interaction. We highlight the flexibility and ease of implementation of this technique by using it to fabricate a variety of 3D cavity geometries, providing a template for engineering multimode quantum systems with exceptionally low dissipation. This work is an important step towards realizing hardware efficient random access quantum memories and processors, and for exploring quantum many-body physics with photons.

arXiv:2010.16382•Physical Review Letters•Aug 31, 2021•86 citations

Proposal for quantum memory miniaturization in superconducting circuit QED

Genting Dai, Kaiyong He, Yongcheng He +3 more

Superconducting circuit quantum electrodynamics is the main architecture for implementation of quantum processors. This work presents a proposal to miniaturize quantum memory devices by combining the quantum memory qubits encoded directly in the first two Fock states ${|0\ensuremath{\rangle},|1\ensuremath{\rangle}}$ and the bus channel in the same specially designed multimode cavity. One key feature of the resonant modes used for quantum memory is that the microwave current is localized, which facilitates the storage and retrieval of information in superconducting qubits while preventing crosstalk from other resonant modes. Frequency design and distinct coupling strengths in this kind of device are analyzed with electromagnetic simulations and numerical calculations. The quantum memory properties, e.g., storage speed, fidelity, and stability, are examined in four cases: (1) memory operation of single-qubit state, (2) disturbing effects, (3) coupling operation, and (4) entangled states storage. Decoherence time of the quantum processor can be extended to more than one order of magnitude longer than that without the memory. By integrating transmons with optimally designed coplanar waveguide multimode quantum memories, the present study could provide an optimistic perspective for the development of large-scale superconducting quantum processors.

Physical Review A•Apr 24, 2023•1 citation
A quantum memory has to meet the conflicting requirements of strong coupling for fast readout and weak coupling for long storage. Multimode rectangular superconducting 3D cavities are known to satisfy both properties. Here, we systematically study the external coupling to the two lowest-frequency modes of an aluminum cavity. First, we introduce a general analytical scheme to describe the capacitive coupling of the antenna pin and validate this model experimentally. On this basis, we engineer an antenna which is overcoupled to the first mode, but undercoupled to the second mode.
Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit both to a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. The external coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of 666 with a ZZZ-fidelity of 82%82\%82%. We also find that this enhancement is not limited by fundamental constraints.
Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well-controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit to both a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. External coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of 6 with a fidelity of approximately 80% determined via quantum process tomography. We also find that this enhancement is not limited by fundamental constraints.
Three-dimensional microwave cavities are key components for superconducting-qubit readout and for the characterization of cryogenic microwave electronics [1]. In this work, we report the design, simulation, fabrication, and experimental validation of a rectangular 3D resonant cavity targeting operation near 5.4 GHz, compatible with the frequency range of CryoCMOS voltage-controlled oscillators (VCO). The cavity dimensions were obtained from analytical mode calculations, corrected for practical machining constraints, and validated using finite-element electromagnetic simulations in ANSYS HFSS. A split-block aluminum cavity was fabricated and characterized at room temperature using vector network analysis. The measured resonances agree with analytical and simulated predictions within sub-1% deviation, confirming the accuracy of the design procedure. Different SMA connector penetration configurations were experimentally investigated to evaluate the trade-off between loaded quality factor and transmission efficiency. The asymmetric 7 mm/8 mm7 \mathrm{~mm} / 8 \mathrm{~mm}7 mm/8 mm configuration provided the best compromise, yielding a loaded quality factor of approximately 3200 and improving the transmitted signal by about 20 dB compared with the symmetric 7 mm/7 mm\mathrm{7 ~ m m} / \mathrm{7 ~ m m}7 mm/7 mm configuration. These results demonstrate a reproducible design route for 3D cavities intended for CryoCMOS testing and future superconducting-qubit readout experiments.
In superconducting quantum information, machined aluminum superconducting cavities have proven to be a well-controlled, low-dissipation electromagnetic environment for quantum circuits such as qubits. They can possess large internal quality factors, Qint > 108, and present the possibility of storing quantum information for times far exceeding those of microfabricated circuits. However, in order to be useful as a storage element, these cavities require a fast “read/write” mechanism—in other words, they require tunable coupling between other systems of interest such as other cavity modes and qubits, as well as any associated readout hardware. In this work, we demonstrate these qualities in a simple dual cavity architecture in which a low-Q “readout” mode is parametrically coupled to a high-Q “storage” mode, allowing us to store and retrieve classical information. Specifically, we employ a flux-driven Josephson junction-based coupling scheme to controllably swap coherent states between two cavities, demonstrating full, sequenced control over the coupling rates between modes.
Multimode cavity quantum electrodynamics-where a two-level system interacts simultaneously with many cavity modes-provides a versatile framework for quantum information processing and quantum optics. Because of the combination of long coherence times and large interaction strengths, one of the leading experimental platforms for cavity QED involves coupling a superconducting circuit to a 3D microwave cavity. In this work, we realize a 3D multimode circuit QED system with single photon lifetimes of 2 ms across 9 modes of a novel seamless cavity. We demonstrate a variety of protocols for universal single-mode quantum control applicable across all cavity modes, using only a single drive line. We achieve this by developing a straightforward flute method for creating monolithic superconducting microwave cavities that reduces loss while simultaneously allowing control of the mode spectrum and mode-qubit interaction. We highlight the flexibility and ease of implementation of this technique by using it to fabricate a variety of 3D cavity geometries, providing a template for engineering multimode quantum systems with exceptionally low dissipation. This work is an important step towards realizing hardware efficient random access quantum memories and processors, and for exploring quantum many-body physics with photons.
Superconducting circuit quantum electrodynamics is the main architecture for implementation of quantum processors. This work presents a proposal to miniaturize quantum memory devices by combining the quantum memory qubits encoded directly in the first two Fock states ${|0\ensuremath{\rangle},|1\ensuremath{\rangle}}$ and the bus channel in the same specially designed multimode cavity. One key feature of the resonant modes used for quantum memory is that the microwave current is localized, which facilitates the storage and retrieval of information in superconducting qubits while preventing crosstalk from other resonant modes. Frequency design and distinct coupling strengths in this kind of device are analyzed with electromagnetic simulations and numerical calculations. The quantum memory properties, e.g., storage speed, fidelity, and stability, are examined in four cases: (1) memory operation of single-qubit state, (2) disturbing effects, (3) coupling operation, and (4) entangled states storage. Decoherence time of the quantum processor can be extended to more than one order of magnitude longer than that without the memory. By integrating transmons with optimally designed coplanar waveguide multimode quantum memories, the present study could provide an optimistic perspective for the development of large-scale superconducting quantum processors.