Photon number resolving detection, which means to discriminate the number of incident photons, is required technology in various fields such as optical quantum information processing, quantum communication, and quantum metrology. Especially in the field of optical quantum computing, a photon-number-resolving detector is thought to play an important role in preparation of non-Gaussian states [1] which are complex quantum states required for universal quantum computation and error correction.
Photon number resolving detection, which means to discriminate the number of incident photons, is required technology in various fields such as optical quantum information processing, quantum communication, and quantum metrology. Especially in the field of optical quantum computing, a photon-number-resolving detector is thought to play an important role in preparation of non-Gaussian states [1] which are complex quantum states required for universal quantum computation and error correction.
Superconducting nanostrip photon detectors have been used as single-photon detectors, which can discriminate only photons' presence or absence. It has recently been found that they can discriminate the number of photons by analyzing the output signal waveform, and they are expected to be used in various fields, especially in optical-quantum-information processing. Here, we improve the photon-number-resolving performance for light with a high-average photon number by pattern matching of the output signal waveform. Furthermore, we estimate the positive-operator-valued measure of the detector by a quantum detector tomography. The result shows that the device has photon-number-resolving performance up to five photons without any multiplexing or arraying, indicating that it is useful as a photon-number-resolving detector.
In quantum optical computing and quantum cryptography a very important problem is that of developing an efficient photon-number resolving detector. Such a device is critical for the development of linear optical quantum computing (LOQC) [1], and can be also used in quantum cryptography [2]. A recent paper claims to have demonstrated the operation of a superconducting, number-resolving photon detector, developed by a group at NIST [3]. However, this device operates with a quantum efficiency of only about 20%, and we show here that it cannot discriminate photon number, even in principal. However, the NIST device has a very low dark-count rate, much less than 1%, which means that it can quite efficiently discriminate against the absence of photons of particular numbers. We call such a device a number-discriminating non-photon detector. Interestingly enough, even though this detector cannot yield photon number—its ability to discriminate against photons of certain numbers allows it to be used, under suitable assumptions, to reconstruct the ensemble photostatistics of the incoming photon field. However, such a low-efficiency device cannot be used, say, in LOQC, where single-shot photon number discrimination is required.
Single-photon detectors based on superconducting thin films have become a viable class of technologies for widespread usage in quantum optics. In this tutorial paper we introduce the key performance metrics required of them for quantum information processing and related fields. We review the latest records achieved by such devices, study technical details regarding recent improvements in superconducting nanowire detectors and transition-edge sensors, and present representative applications in cutting-edge research areas that benefit from these advances.
Photon-number-resolving (PNR) detectors are a key enabling technology in photonic quantum information processing. Here, we demonstrate the PNR capacity of conventional superconducting nanowire single-photon detectors by performing ultra-high-resolution time-tagging of the detector-generated electrical pulses. This method provides a viable approach for PNR with high detection efficiency and a high operational repetition rate. We present the implementation of such a PNR detector in the telecom C-band and its characterization by measuring the photon-number statistics of coherent light with tunable intensity. Additionally, we demonstrate the capabilities of the detection method by measuring photon-number correlations of non-classical states.
Since their first demonstration in 2001 [Gol’tsman et al., Appl. Phys. Lett. 79, 705–707 (2001)], superconducting-nanowire single-photon detectors (SNSPDs) have witnessed two decades of great developments. SNSPDs are the detector of choice in most modern quantum optics experiments and are slowly finding their way into other photon-starved fields of optics. Until now, however, in nearly all experiments, SNSPDs were used as “binary” detectors, meaning that they could only distinguish between 0 and >=1 photons, and photon number information was lost. Recent research has demonstrated proof-of-principle photon-number resolution (PNR) SNSPDs counting 2–5 photons. The photon-number-resolving capability is highly demanded in various quantum-optics experiments, including Hong–Ou–Mandel interference, photonic quantum computing, quantum communication, and non-Gaussian quantum state preparation. In particular, PNR detectors at the wavelength range of 850–950 nm are of great interest due to the availability of high-quality semiconductor quantum dots (QDs) [Heindel et al., Adv. Opt. Photonics 15, 613–738 (2023)] and high-performance cesium-based quantum memories [Ma et al., J. Opt. 19, 043001 (2017)]. In this paper, we demonstrate NbTiN-based SNSPDs with >94% system detection efficiency, sub-11 ps timing jitter for one photon, and sub-7 ps for 2 photons. More importantly, our detectors resolve up to 7 photons using conventional cryogenic electric readout circuitry. Through theoretical analysis, we show that the PNR performance of demonstrated detectors can be further improved by enhancing the signal-to-noise ratio and bandwidth of our readout circuitry. Our results are promising for the future of optical quantum computing and quantum communication.
High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.