Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Fast high-fidelity spin readout in the singlet-triplet basis using a resonator and tailored pulses

Xingyu Zhu, Tao Tu, Ao-Lin Guo, Guang‐Can Guo, Chuan‐Feng Li

Published Sep 10, 2021• 1 citation
Publisher

Abstract

Electron spins in semiconductor quantum dots are a promising platform for qubits. An essential step toward quantum error correction with spin qubits requires the ability to read out states and identify errors in the two-spin logical basis in a fast and high-fidelity way. Here we propose a scheme for spin singlet-triplet readout in a double quantum dot, with a superconducting resonator serving as the detector. Making use of a spin driving pulse sequence, this procedure can read out the spin states with a fidelity of $99.9%$ in a time 100 ns. Interestingly, this method makes use of the spin driving pulse to adjust the resonator signal field, leading to significant improvement of the spin readout. In addition, this method can be directly applied to multiplexed readout of qubits and repeated readout to identify logical errors. These results pave the way for the implementation of quantum error correction and scalable quantum processor with spin qubits.

DOI
10.1103/physreva.104.032409

Related papers

Fast high-fidelity parity measurement of spin qubits in quantum dots using modulated pulses

Xingyu Zhu, Tao Tu, Guang‐Can Guo +1 more

Spin qubits in semiconductor quantum dots are a promising candidate for scalable quantum computation. A key step in quantum error correction with spin qubits is the capability to perform high-fidelity parity measurement much faster than the coherence time and to generate entanglement deterministically. Here we propose a parity measurement scheme for two spin qubits by modulated pulses, using a superconducting resonator as a detector. We show that the distinction between spin-parity states can be achieved with a high fidelity within a short measurement time. The combination of parity measurement and feedback control allows the deterministic preparation of various spin entangled states. In addition, the method can be directly applied to parity measurements and surface codes of multiple spin qubits. These results pave the way for fault-tolerant quantum computation with spin qubits.

Physical Review A•Mar 27, 2023•3 citations

Sub-microsecond high-fidelity dispersive readout of a spin qubit with squeezed photons

Chon‐Fai Kam, Xuedong Hu

Fast and high-fidelity qubit measurement is essential for realizing quantum error correction, which is in turn a key ingredient to universal quantum computing. For electron spin qubits, fast readout is one of the significant road blocks toward error correction. Here we examine the dispersive readout of a single spin in a semiconductor double quantum dot coupled to a microwave resonator. We show that using displaced squeezed vacuum states for the probing photons can improve the qubit readout fidelity and speed. Under condition of proper phase matching, we find that a moderate, and only moderate, squeezing can enhance both the signal-to-noise ratio and the fidelity of the qubit-state readout, and the optimal readout time can be shortened to the sub-microsecond range with above $99\%$ fidelity. These enhancements are achieved at low probing microwave intensity, ensuring non-demolition qubit measurement.

arXiv:2312.10820•Dec 17, 2023•0 citations

Robust universal gates for quantum-dot spin qubits using tunable adiabatic passages

Bo Gong, Li Wang, Tao Tu +2 more

A logical qubit based on electron-spin singlet-triplet states in a semiconductor double dot has emerged as one of the promising candidates for quantum information processing. Here we propose a systematic method to implement rapid quantum gates in the nanosecond time scale for both a single qubit and multiqubits, by applying adiabatic driving pulses with tunable velocity. This yields considerable high-fidelity gate operations reaching $99.9%$ which are crucial to scalable quantum computation in a semiconductor-based architecture, even considering the demanding experimental constraints and realistic spin and charge noises.

Physical Review A•Sep 12, 2016•7 citations

Resonator-based Hole Spin Qubit Readout

Eoin G. Kelly

Spin qubits in gate-defined semiconductor quantum dots are a promising platform for realising a scalable quantum computer. This platform encodes quantum information into the intrinsic angular momentum (spin) of individual electrons or holes. In particular, hole spins in quantum dots enable the possibility of all-electrical spin control due to their intrinsic spin-orbit coupling. One important criterion of a quantum computer is the ability to reliably read out the state of the qubit. This is done by mapping spin information to the charge degree of freedom, combined with a method for charge detection. Charge detection can be facilitated by coupling a resonator directly to the quantum dot gate or to a charge sensor and measuring the resonator's phase or amplitude response. In this thesis, we describe a set of experiments relating to the implementation of hole spin qubit readout with superconducting resonators. First, we study gate-based charge sensing in a Si fin field-effect transistor (finFET) device using a superconducting NbN nanowire resonator. We find that the resonator amplifies capacitive crosstalk when electrical control pulses are applied to gate electrodes in this device. This occurs whenever a spectral component of qubit control pulses overlaps with the resonance frequency, which we show may occur for both baseband and radio-frequency (RF) drive signals. We quantify this crosstalk in a transport-based method, and attribute its source to the capacitance between the bondpads of neighbouring gate electrodes. In a second experiment, we use an RF charge sensor with the same nanowire technology to read out hole spin qubits formed in the quantum well of a Ge/SiGe heterostructure. A screening layer approach is used to facilitate RF matching due to large RF dissipation found in the heterostructure. We implement a double-latched readout scheme in this system to reduce errors arising from both spin and charge decay during readout. The spin-to-charge conversion process and its dependence on magnetic field orientation is studied. Spin and charge decay processes arising after spin-to-charge conversion are mitigated by choosing an optimal working point for the field orientation, field amplitude and readout pulse times. By doing so, we achieve an average single-shot state-preparation-and-measurement fidelity of 97%, primarily bounded by imperfect state preparation and limited signal-to-noise ratio. Finally, we study coplanar waveguide resonators fabricated from NbN. We investigate the feasibility of integrating this type of resonator onto the same chip as the Si finFET quantum dots. We then develop a novel resonator readout technique by the interference of two microwave sidebands. We demonstrate the insensitivity of this technique to common-mode phase and amplitude noise both theoretically and experimentally. This technique is then used to study resonator noise arising from two-level system defects. These results highlight both the practical constraints and the potential for achieving high readout fidelities using resonator-based hole spin qubit readout. This work establishes a blueprint for mitigating resonator-induced crosstalk and enabling high-fidelity readout in lossy materials by incorporating a screening layer.

•Jan 1, 2025•0 citations

Dynamics of probing a quantum-dot spin qubit with superconducting resonator photons

Xingyu Zhu, Tao Tu, Ao-Lin Guo +3 more

The hybrid system of electron spins and resonator photons is an attractive architecture for quantum computing owing to the long coherence times of spins and the promise of long-distance coupling between arbitrary pairs of qubits via photons. For the device to serve as a building block for a quantum processer, it is also necessary to readout the spin qubit state. Here we analyze in detail the measurement process of an electron spin singlet-triplet qubit in quantum dots using a coupled superconducting resonator. We show that the states of the spin singlet-triplet qubit lead to readily observable features in the spectrum of a microwave field through the resonator. These features provide useful information on the hybrid system. Moreover, we discuss the working points which can be implemented with high performance in the current state-of-the-art devices. These results can be used to construct the high fidelity measurement toolbox in the spin-circuit QED system.

Scientific Reports•Oct 19, 2018•3 citations

Fast Gate-Based Readout of Silicon Quantum Dots Using Josephson Parametric Amplification

Simon Schaal, I. Ahmed, J. A. Haigh +12 more

Spins in silicon quantum devices are promising candidates for large-scale quantum computing. Gate-based sensing of spin qubits offers a compact and scalable readout with high fidelity, however, further improvements in sensitivity are required to meet the fidelity thresholds and measurement timescales needed for the implementation of fast feedback in error correction protocols. Here, we combine radio-frequency gate-based sensing at 622 MHz with a Josephson parametric amplifier, that operates in the 500-800 MHz band, to reduce the integration time required to read the state of a silicon double quantum dot formed in a nanowire transistor. Based on our achieved signal-to-noise ratio, we estimate that singlet-triplet single-shot readout with an average fidelity of 99.7% could be performed in 1 μs, well below the requirements for fault-tolerant readout and 30 times faster than without the Josephson parametric amplifier. Additionally, the Josephson parametric amplifier allows operation at a lower radio-frequency power while maintaining identical signal-to-noise ratio. We determine a noise temperature of 200 mK with a contribution from the Josephson parametric amplifier (25%), cryogenic amplifier (25%) and the resonator (50%), showing routes to further increase the readout speed.

arXiv:1907.09429•Physical Review Letters•Feb 14, 2020•78 citations
Electron spins in semiconductor quantum dots are a promising platform for qubits. An essential step toward quantum error correction with spin qubits requires the ability to read out states and identify errors in the two-spin logical basis in a fast and high-fidelity way. Here we propose a scheme for spin singlet-triplet readout in a double quantum dot, with a superconducting resonator serving as the detector. Making use of a spin driving pulse sequence, this procedure can read out the spin states with a fidelity of 99.999.9%99.9 in a time 100 ns. Interestingly, this method makes use of the spin driving pulse to adjust the resonator signal field, leading to significant improvement of the spin readout. In addition, this method can be directly applied to multiplexed readout of qubits and repeated readout to identify logical errors. These results pave the way for the implementation of quantum error correction and scalable quantum processor with spin qubits.
Spin qubits in semiconductor quantum dots are a promising candidate for scalable quantum computation. A key step in quantum error correction with spin qubits is the capability to perform high-fidelity parity measurement much faster than the coherence time and to generate entanglement deterministically. Here we propose a parity measurement scheme for two spin qubits by modulated pulses, using a superconducting resonator as a detector. We show that the distinction between spin-parity states can be achieved with a high fidelity within a short measurement time. The combination of parity measurement and feedback control allows the deterministic preparation of various spin entangled states. In addition, the method can be directly applied to parity measurements and surface codes of multiple spin qubits. These results pave the way for fault-tolerant quantum computation with spin qubits.
Fast and high-fidelity qubit measurement is essential for realizing quantum error correction, which is in turn a key ingredient to universal quantum computing. For electron spin qubits, fast readout is one of the significant road blocks toward error correction. Here we examine the dispersive readout of a single spin in a semiconductor double quantum dot coupled to a microwave resonator. We show that using displaced squeezed vacuum states for the probing photons can improve the qubit readout fidelity and speed. Under condition of proper phase matching, we find that a moderate, and only moderate, squeezing can enhance both the signal-to-noise ratio and the fidelity of the qubit-state readout, and the optimal readout time can be shortened to the sub-microsecond range with above 99%99\%99% fidelity. These enhancements are achieved at low probing microwave intensity, ensuring non-demolition qubit measurement.
A logical qubit based on electron-spin singlet-triplet states in a semiconductor double dot has emerged as one of the promising candidates for quantum information processing. Here we propose a systematic method to implement rapid quantum gates in the nanosecond time scale for both a single qubit and multiqubits, by applying adiabatic driving pulses with tunable velocity. This yields considerable high-fidelity gate operations reaching 99.999.9%99.9 which are crucial to scalable quantum computation in a semiconductor-based architecture, even considering the demanding experimental constraints and realistic spin and charge noises.
Spin qubits in gate-defined semiconductor quantum dots are a promising platform for realising a scalable quantum computer. This platform encodes quantum information into the intrinsic angular momentum (spin) of individual electrons or holes. In particular, hole spins in quantum dots enable the possibility of all-electrical spin control due to their intrinsic spin-orbit coupling. One important criterion of a quantum computer is the ability to reliably read out the state of the qubit. This is done by mapping spin information to the charge degree of freedom, combined with a method for charge detection. Charge detection can be facilitated by coupling a resonator directly to the quantum dot gate or to a charge sensor and measuring the resonator's phase or amplitude response. In this thesis, we describe a set of experiments relating to the implementation of hole spin qubit readout with superconducting resonators. First, we study gate-based charge sensing in a Si fin field-effect transistor (finFET) device using a superconducting NbN nanowire resonator. We find that the resonator amplifies capacitive crosstalk when electrical control pulses are applied to gate electrodes in this device. This occurs whenever a spectral component of qubit control pulses overlaps with the resonance frequency, which we show may occur for both baseband and radio-frequency (RF) drive signals. We quantify this crosstalk in a transport-based method, and attribute its source to the capacitance between the bondpads of neighbouring gate electrodes. In a second experiment, we use an RF charge sensor with the same nanowire technology to read out hole spin qubits formed in the quantum well of a Ge/SiGe heterostructure. A screening layer approach is used to facilitate RF matching due to large RF dissipation found in the heterostructure. We implement a double-latched readout scheme in this system to reduce errors arising from both spin and charge decay during readout. The spin-to-charge conversion process and its dependence on magnetic field orientation is studied. Spin and charge decay processes arising after spin-to-charge conversion are mitigated by choosing an optimal working point for the field orientation, field amplitude and readout pulse times. By doing so, we achieve an average single-shot state-preparation-and-measurement fidelity of 97%, primarily bounded by imperfect state preparation and limited signal-to-noise ratio. Finally, we study coplanar waveguide resonators fabricated from NbN. We investigate the feasibility of integrating this type of resonator onto the same chip as the Si finFET quantum dots. We then develop a novel resonator readout technique by the interference of two microwave sidebands. We demonstrate the insensitivity of this technique to common-mode phase and amplitude noise both theoretically and experimentally. This technique is then used to study resonator noise arising from two-level system defects. These results highlight both the practical constraints and the potential for achieving high readout fidelities using resonator-based hole spin qubit readout. This work establishes a blueprint for mitigating resonator-induced crosstalk and enabling high-fidelity readout in lossy materials by incorporating a screening layer.
The hybrid system of electron spins and resonator photons is an attractive architecture for quantum computing owing to the long coherence times of spins and the promise of long-distance coupling between arbitrary pairs of qubits via photons. For the device to serve as a building block for a quantum processer, it is also necessary to readout the spin qubit state. Here we analyze in detail the measurement process of an electron spin singlet-triplet qubit in quantum dots using a coupled superconducting resonator. We show that the states of the spin singlet-triplet qubit lead to readily observable features in the spectrum of a microwave field through the resonator. These features provide useful information on the hybrid system. Moreover, we discuss the working points which can be implemented with high performance in the current state-of-the-art devices. These results can be used to construct the high fidelity measurement toolbox in the spin-circuit QED system.
Spins in silicon quantum devices are promising candidates for large-scale quantum computing. Gate-based sensing of spin qubits offers a compact and scalable readout with high fidelity, however, further improvements in sensitivity are required to meet the fidelity thresholds and measurement timescales needed for the implementation of fast feedback in error correction protocols. Here, we combine radio-frequency gate-based sensing at 622 MHz with a Josephson parametric amplifier, that operates in the 500-800 MHz band, to reduce the integration time required to read the state of a silicon double quantum dot formed in a nanowire transistor. Based on our achieved signal-to-noise ratio, we estimate that singlet-triplet single-shot readout with an average fidelity of 99.7% could be performed in 1 μs, well below the requirements for fault-tolerant readout and 30 times faster than without the Josephson parametric amplifier. Additionally, the Josephson parametric amplifier allows operation at a lower radio-frequency power while maintaining identical signal-to-noise ratio. We determine a noise temperature of 200 mK with a contribution from the Josephson parametric amplifier (25%), cryogenic amplifier (25%) and the resonator (50%), showing routes to further increase the readout speed.