Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Final Report

SIS (Superconductor-Insulator-Superconductor) mixer research

M. J. Feldman

Published Mar 1, 1987• 0 citations
OpenAlex

Abstract

Theoretical and experimental research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The quantum theory of mixing was employedto calculate the saturation behavior of the SIS mixer and the SIS direct detector. The direct detector was found to saturate at far higher powers than previously believed, allowing the possibility of practical application of this device. Experiments verified the saturation theory. The mixer saturation expression led to the formulation of frequency scaling regions. The origin of quantum noise sources are completely minimized. The mixer quantum noise limit was shown to be reached in only two special cases. Computer calculations determined that the behavior of SIS receivers divides into two regimes, low and high frequencies, the cross-over frequency depending upon junction quality. The properties of these two regimes were delineated. All previous SIS receivers have operated in the low frequency regime. Plasma-etched niobium nitride edge junctions have been fabricated using a novel barrier formation process. These junctions have excellent current-voltage characteristics, but their precise physical nature has not yet been determined. (Author)

Related papers

SIS Mixer Research

Arthur W. Lichtenberger, M. J. Feldman

Abstract : Theoretical and experimental research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The properties of an SIS mixer using a slightly nonideal junction, with finite LO power, were determined by analytic expansion of the equations of the quantum theory of mixing. The resulting equations have a particularly simple form. The minimum noise temperature is controlled by the leakage current of the junction. Even the most nearly ideal junctions made today require a considerable LO for best sensitivity; nevertheless, even a comparatively large leakage current allows mixer noise to be only a small factor above the quantum limit. The saturation properties of SIS mixers subjected to broad-band thermal noise obey the equations derived for monochromatic saturating signals. The Josephson junction tuning inductor was analyzed with the conclusion that such a device is not feasible with present fabrication techniques. Computer calculations using synthetic SIS junction I-V characteristics predicted the performance of an optimized receiver over its entire operating frequency range. Many aspects of the operation of SIS mixers were clarified and unexpected new phenomena were predicted. A 'photon picture' interpretation of the quantum theory of mixing is in the early stages of development. Niobium nitride edge junctions with excellent current-voltage characteristics were fabricated using novel barrier formation processes. The role of surface damage in the quality of NbN edge junction electrical characteristics was investigated and unexpected results were obtained.

Final Technical Report•Nov 1, 1990•0 citations

SIS mixer research. Final technical report, 1 Feb 89-13 May 90

A. W. Lichtenberger, M.J. Feldman

Theoretica and experimental research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The properties of an SIS mixer using a slightly nonideal junction, with finite LO power, were determined by analytic expansion of the equations of the quantum theory of mixing. The resulting equations have a particularly simple form. The minimum noise temperature is controlled by the leakage current of the junction. Even the most nearly ideal junctions made today require a considerable LO for best sensitivity; nevertheless, even a comparatively large leakage current allows mixer noise to be only a small factor above the quantum limit. The saturation properties of SIS mixers subjected to broad-band thermal noise obey the equations derived for monochromatic saturating signals. The Josephson junction tuning inductor was analyzed with the conclusion that such a device is not feasible with present fabrication techniques. Computer calculations using synthetic SIS junction I-V characteristics predicted the performance of an optimized receiver over its entire operating frequency range. Many aspects of the operation of SIS mixers were clarified and unexpected new phenomena were predicted. A 'photon picture' interpretation of the quantum theory of mixing is in the early stages ofmore » development. Niobium nitride edge junctions with excellent current-voltage characteristics were fabricated using novel barrier formation processes. The role of surface damage in the quality of NbN edge junction electrical characteristics was investigated and unexpected results were obtained.« less

•Nov 1, 1990•0 citations

Theoretical SIS mixer research

M. J. Feldman

Theoretical research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The properties of SIS mixers using nonideal junctions and finite LO power, were determined by analytic expansion of the equations of the quantum theory of mixing, and also by computer simulations of SIS receivers over the entire range of experimental parameters. The result is a new coherent and intuitive picture of SIS mixer behavior. Many of the outstanding mysteries and questions about SIS receivers are resolved, and this contributes greatly to the design and interpretation of SIS mixer experiments. Other calculations show how to achieve sub-quantum noise temperatures in the phase sensitive SIS mixer, an important step towards realization of ultra-low- noise detectors. A simplified model casts doubt on the superlative experimental results reported for the rf-series dc-parallel biased array SIS mixer. Superconductivity; SIS mixer; Submillimeter-wave detection.

Final Technical Report•Jun 1, 1993•0 citations

Noise parameters of SIS mixers

Larry R. D’Addario

It has been shown that low-noise receivers can be constructed at millimeter wavelengths by using mixers containing superconducting tunnel junctions as the nonlinear elements. This is possible because of both the low intrinsic noise of these devices and their potential for high conversion gain. Here, the quantum theory of mixing is used to derive the full-noise parameters and small-signal parameters of sinusoidally pumped SIS (superconductor-insulator-superconductor) junctions. These are then put into a form that allows the theory of two-port linear networks to be brought to bear, allowing calculation of such useful parameters as minimum noise temperature, optimum source impedance, available (or exchangeable) gain at minimum noise, and stability factor. These quantities are properties of the pumped junction that do not depend on the source or load impedance, but do depend on the terminations at the image and harmonic sideband frequencies. The harmonic sidebands are taken to be shorted, and the image termination dependence is studied. Numerical results are presented for both ideal (BSC theory) and practical (measured current-voltage characteristic) junctions. The noise parameters of the cascade connection of an SIS mixer and a (noisy) IF amplifier are considered, leading to a specification of the optimum coupling network between the two. It is noted that the SIS mixer is usually not unconditionally stable, but that oscillation can be avoided by careful design of the IF coupling network.< >

IEEE Transactions on Microwave Theory and Techniques•Jul 1, 1988•19 citations

Design considerations for high-gain SIS mixers

Larry R. D’Addario, Michael W. Cromar, F L Lloyd

It has been shown both theoretically [1] and experimentally [2,3] that the very sharp nonlinearity in the conductance of superconducting tunnel junctions can be used to implement millimeter wavelength mixers having high gain and very low noise, leading to the possibility of receivers that achieve the quantum noise limit. The junctions involved contain a thin insulating barrier between two superconductors, and are thus known as superconductor-insulator-superconductor (SIS) junctions. They are physically identical to Josephson junctions, but in this application the conductance is via the tunneling of quasiparticles (unpaired electrons), and so the Josephson effect is not involved.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Dec 1, 1985•0 citations

Pushing the operating range of SIS mixers into the THz regime

T. M. Klapwijk, Pieter Dieleman, M. W. M. de Graauw

In recent years, responding to the need of the astronomical community, superconductor - insulator - superconductor (SIS) mixers have been developed to operate at THz frequencies. Best results are obtained by using niobium-based tunnel junctions with well-matched low-loss normal metal striplines, which are found to be less lossy than niobium striplines operated above the gap frequency of niobium (700 GHz). Niobium nitride tunnel junctions with a magnesium oxide tunnel barrier, although having reasonable-quality current - voltage characteristics, have been found to be unsuitable owing to excess shot noise resulting from pinholes in the barrier.

Superconductor Science and Technology•Dec 1, 1997•5 citations
Theoretical and experimental research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The quantum theory of mixing was employedto calculate the saturation behavior of the SIS mixer and the SIS direct detector. The direct detector was found to saturate at far higher powers than previously believed, allowing the possibility of practical application of this device. Experiments verified the saturation theory. The mixer saturation expression led to the formulation of frequency scaling regions. The origin of quantum noise sources are completely minimized. The mixer quantum noise limit was shown to be reached in only two special cases. Computer calculations determined that the behavior of SIS receivers divides into two regimes, low and high frequencies, the cross-over frequency depending upon junction quality. The properties of these two regimes were delineated. All previous SIS receivers have operated in the low frequency regime. Plasma-etched niobium nitride edge junctions have been fabricated using a novel barrier formation process. These junctions have excellent current-voltage characteristics, but their precise physical nature has not yet been determined. (Author)
Abstract : Theoretical and experimental research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The properties of an SIS mixer using a slightly nonideal junction, with finite LO power, were determined by analytic expansion of the equations of the quantum theory of mixing. The resulting equations have a particularly simple form. The minimum noise temperature is controlled by the leakage current of the junction. Even the most nearly ideal junctions made today require a considerable LO for best sensitivity; nevertheless, even a comparatively large leakage current allows mixer noise to be only a small factor above the quantum limit. The saturation properties of SIS mixers subjected to broad-band thermal noise obey the equations derived for monochromatic saturating signals. The Josephson junction tuning inductor was analyzed with the conclusion that such a device is not feasible with present fabrication techniques. Computer calculations using synthetic SIS junction I-V characteristics predicted the performance of an optimized receiver over its entire operating frequency range. Many aspects of the operation of SIS mixers were clarified and unexpected new phenomena were predicted. A 'photon picture' interpretation of the quantum theory of mixing is in the early stages of development. Niobium nitride edge junctions with excellent current-voltage characteristics were fabricated using novel barrier formation processes. The role of surface damage in the quality of NbN edge junction electrical characteristics was investigated and unexpected results were obtained.
Theoretica and experimental research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The properties of an SIS mixer using a slightly nonideal junction, with finite LO power, were determined by analytic expansion of the equations of the quantum theory of mixing. The resulting equations have a particularly simple form. The minimum noise temperature is controlled by the leakage current of the junction. Even the most nearly ideal junctions made today require a considerable LO for best sensitivity; nevertheless, even a comparatively large leakage current allows mixer noise to be only a small factor above the quantum limit. The saturation properties of SIS mixers subjected to broad-band thermal noise obey the equations derived for monochromatic saturating signals. The Josephson junction tuning inductor was analyzed with the conclusion that such a device is not feasible with present fabrication techniques. Computer calculations using synthetic SIS junction I-V characteristics predicted the performance of an optimized receiver over its entire operating frequency range. Many aspects of the operation of SIS mixers were clarified and unexpected new phenomena were predicted. A 'photon picture' interpretation of the quantum theory of mixing is in the early stages ofmore » development. Niobium nitride edge junctions with excellent current-voltage characteristics were fabricated using novel barrier formation processes. The role of surface damage in the quality of NbN edge junction electrical characteristics was investigated and unexpected results were obtained.« less
Theoretical research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The properties of SIS mixers using nonideal junctions and finite LO power, were determined by analytic expansion of the equations of the quantum theory of mixing, and also by computer simulations of SIS receivers over the entire range of experimental parameters. The result is a new coherent and intuitive picture of SIS mixer behavior. Many of the outstanding mysteries and questions about SIS receivers are resolved, and this contributes greatly to the design and interpretation of SIS mixer experiments. Other calculations show how to achieve sub-quantum noise temperatures in the phase sensitive SIS mixer, an important step towards realization of ultra-low- noise detectors. A simplified model casts doubt on the superlative experimental results reported for the rf-series dc-parallel biased array SIS mixer. Superconductivity; SIS mixer; Submillimeter-wave detection.
It has been shown that low-noise receivers can be constructed at millimeter wavelengths by using mixers containing superconducting tunnel junctions as the nonlinear elements. This is possible because of both the low intrinsic noise of these devices and their potential for high conversion gain. Here, the quantum theory of mixing is used to derive the full-noise parameters and small-signal parameters of sinusoidally pumped SIS (superconductor-insulator-superconductor) junctions. These are then put into a form that allows the theory of two-port linear networks to be brought to bear, allowing calculation of such useful parameters as minimum noise temperature, optimum source impedance, available (or exchangeable) gain at minimum noise, and stability factor. These quantities are properties of the pumped junction that do not depend on the source or load impedance, but do depend on the terminations at the image and harmonic sideband frequencies. The harmonic sidebands are taken to be shorted, and the image termination dependence is studied. Numerical results are presented for both ideal (BSC theory) and practical (measured current-voltage characteristic) junctions. The noise parameters of the cascade connection of an SIS mixer and a (noisy) IF amplifier are considered, leading to a specification of the optimum coupling network between the two. It is noted that the SIS mixer is usually not unconditionally stable, but that oscillation can be avoided by careful design of the IF coupling network.< >
It has been shown both theoretically [1] and experimentally [2,3] that the very sharp nonlinearity in the conductance of superconducting tunnel junctions can be used to implement millimeter wavelength mixers having high gain and very low noise, leading to the possibility of receivers that achieve the quantum noise limit. The junctions involved contain a thin insulating barrier between two superconductors, and are thus known as superconductor-insulator-superconductor (SIS) junctions. They are physically identical to Josephson junctions, but in this application the conductance is via the tunneling of quasiparticles (unpaired electrons), and so the Josephson effect is not involved.
In recent years, responding to the need of the astronomical community, superconductor - insulator - superconductor (SIS) mixers have been developed to operate at THz frequencies. Best results are obtained by using niobium-based tunnel junctions with well-matched low-loss normal metal striplines, which are found to be less lossy than niobium striplines operated above the gap frequency of niobium (700 GHz). Niobium nitride tunnel junctions with a magnesium oxide tunnel barrier, although having reasonable-quality current - voltage characteristics, have been found to be unsuitable owing to excess shot noise resulting from pinholes in the barrier.