Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Progress towards a continuously operating matter wave interferometer for inertial sensing

Dalila Rivero, Camila Beli Silva, Maryan Armijo, Hans Keßler, Henrique Felix da Silva, G. Comito, R. F. Shiozaki, R Teixeira, Ph. W. Courteille

Published Aug 30, 2021• 0 citations
OpenAlex

Abstract

We report on our progress in the construction of a continuous matter-wave interferometer for inertial sensing via the non-destructive observation of Bloch oscillations. At the present stage of the experiment, around $10^5$ strontium-88 atoms are cooled down to below 1$\mu$K and transferred to the vertical arm of the optical mode of a ring cavity. Pumped by lasers red-tuned with respect to the $7.6~$kHz broad intercombination transition of strontium, the two counterpropagating modes of the ring cavity form a one-dimensional optical lattice in which the atoms, accelerated by gravity, will perform Bloch oscillations. The atomic motion can be monitored in real-time via its impact on the counterpropagating light fields. We present the actual state of the experiment and characterize the laser spectrometer developed to drive the atom-cavity interaction.

Related papers

Atomic strontium based inertial sensor with micron spatial resolution

G. Ferrari, Andrea Alberti, Robert E. Drullinger +5 more

Summary form only given. Alkali-earth atoms have an electronic level structure particularly suited for applications in matter-wave interferometry and high-precision laser spectroscopy. Recently atomic strontium was the subject of active research in several fields such as all-optical cooling towards quantum degeneracy and detection of ultra-narrow optical transitions. Because of its small elastic cross-section, we show that ultra-cold88Sr in presence of a lattice potential is also particularly well suited for the realization of inertial sensors to accurately measure forces with micro-metric spatial resolution. By loading the sample into a vertical lattice potential we observe persistent Bloch oscillations with a damping time longer than 10 seconds, and from the measured Bloch frequency we determine the local gravity with a sensitivity of 5 x 10-6g. Our result has direct implications in force measurements at small distances from surfaces such as tests of possible deviations form the Newtonian gravity potential at sub-millimetre distances. We will present the status of a force measurement at distances below 20 mum from dielectric and metallic surfaces, which based on ultra-cold atoms undergoing Bloch oscillations. We will also report on the progress towards the realization of an optical frequency standard based on the highly forbidden1S0-3Po 88Sr intercombination line at 698 nm as well as the realization of a laser suited for precision spectroscopy on this transition.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2007•0 citations

Matter-wave interferometry for quantum sensing

C. A. Pessoa

This dissertation reports on advancements in the construction of a quantum sensor for gravimetry based on matter interferometry. Ultra-cold strontium atoms (in the order of 1 μK) within a ring cavity in the bad cavity regime constitute the experimental setup and two distinct approaches were adopted for the comprehension of the systems operation. The first involved simulations of Ramsey-Bordé pulse sequence, specifically the π/2-π-π/2-spin echo sequence using the 689 nm transition of strontium. The sequence is commonly employed in matter interferometers and the simulations provided insights for future measurements. The expected precision of our system is within Δg/g < 10-8, showcasing its potential accuracy. The second approach focused on monitoring Bloch oscillations resulting from the interaction between atoms and cavity light, which induces a frequency proportional to the external force, in our case, gravity. Efforts were made during the experiment towards confirming the systems regime, leading to a significant observation of nonlinear Normal-mode splitting due to high saturation in the strong coupling regime, exhibiting a bi-stable behaviour.

•Feb 23, 2024•0 citations

Construction of an experiment providing cold strontium atoms for atomic interferometry in a ring cavity

Michelle A. Moreno-Armijos

This thesis describes the first steps to fulfill the main objective of our project: the development of a gravimetry system based on the continuous monitoring of Bloch oscillations performed by ultra-cold strontium atoms.The realization of this project comprises three main stages: the first stage consists in obtaining a magneto-optical trap in the broad transition of 461 nm of strontium, the second stage is the transfer to a magneto-optical trap in the narrow intercombination line of 689 nm, and finally the third stage is the monitoring of Bloch oscillations of the cloud of atoms in a ring cavity.This work details the first stage of the project, the creation of an experimental apparatus which produces ultra-cold strontium atoms in the transition of 461 nm, as well as the characterization of the cloud of atoms, temperature, size, number of atoms, etc.For this project, a new experimental apparatus has been designed and realized.It involves an ultra-high vacuum system, magnetic field sources, laser systems and optical instruments which are required for cooling, trapping and repumping strontium atoms.A novel feature is the implementation of a transversely loaded two-dimensional magneto-optical trap, which serves as a source of a cold strontium atomic beam.A loading rate of the atomic beam into a nearby three-dimensional magneto-optical trap exceeding 10 5 s -1 for the 88 Sr isotope at a moderate dispenser temperature of 600 • C are reported.The temperature of the cloud is about 4 mK and its size 0.3 mm, these characteristics suggest that the state of the atomic trap is in optimal conditions to make the transfer to the optical magneto trap in the intercombination line and thus continue with the second stage of the project.

•Apr 1, 2020•2 citations

Guided matter wave inertial sensing in a miniature physics package

K. D. Nelson, Chad Fertig, Paul Hamilton +4 more

We describe an ultra-compact (∼10 cm3 physics package) inertial sensor based on atomic matter waves that are guided within an optical lattice during almost the entire interferometer cycle. We demonstrate a large momentum transfer of up to 8 ℏk photon momentum with a combination of Bragg pulses and Bloch oscillations with scalability to larger numbers of photons. Between momentum transfer steps, we maintain the atoms in a co-moving optical lattice waveguide so that the atoms are in free space only during the Bragg pulses. Our guided matter wave approach paves the way for atomic inertial sensing in dynamic environments in which untrapped atoms would otherwise quickly collide with the walls of a miniature chamber.

arXiv:2006.01951•Applied Physics Letters•Jun 8, 2020•11 citations

Development of a 88Sr-atom interferometer

Chen-Hao Feng

Atom interferometry is a maturing quantum technology which provides one of the most precise approaches to explore fundamental physics, e.g. to search for dark matter, and one day to observe gravitational waves in the frequency range from 10 mHz - 10 Hz. Standard atom interferometers use Bragg or Raman two-photon transitions for the coherent manipulation of matter waves. In a Michelson configuration for atom-aided gravitational waves detection, two orthogonal arms are built to reject laser noise, in the same way as optical interferometers. Atom interferometers utilizing an optical clock transition for coherent manipulation are less affected by the technical noise of the laser, and as a result that single baseline detectors become feasible.At LP2N, we are building a vertical gravity-gradiometer based on atom interferometry using strontium atoms probed on such a clock transition. The final experimental setup will implement a 6-meter tall atomic fountain to realize gradiometry with two or more separated atomic clouds.In my dissertation, I present the realization of the experimental setup in all its sub-systems, and the first experiments with atoms at millikelvin temperature obtained with the first cooling stage with blue light. The laser system for the second red cooling phase and for the coherent manipulation is ready; meanwhile, we realized a dual-frequency Zeeman slower that improves the atomic flux by a factor of six. We also present a study of an original scheme to achieve pulsed and fast light-atom interaction in a narrow-linewidth cavity by exploiting the Stark shift as a high bandwidth switch; this technique could open to the use of narrow-linewidth cavities – and notably their high power buildup - in several contexts, like atom interferometry and quantum information.

•Jan 1, 2021•0 citations

Continuous Sub-Doppler-Cooled Atomic Beam Interferometer for Inertial Sensing

Jonathan M. Kwolek, Adam T. Black

In atomic sensors, continuous interrogation of laser-cooled atoms carries the benefits of improved sensitivity and high measurement bandwidth. However, cooling in proximity to coherent atomic state evolution can degrade performance in compact systems, due to decoherence. This study demonstrates an inertially sensitive matter-wave interferometer in a three-dimensionally-cooled atomic beam that mitigates decoherence while operating continuously. The technique could enable compact atom-interferometer sensors that measure continuously and with high sensitivity on dynamic platforms.

arXiv:2112.09666•Physical Review Applied•Feb 23, 2022•43 citations
We report on our progress in the construction of a continuous matter-wave interferometer for inertial sensing via the non-destructive observation of Bloch oscillations. At the present stage of the experiment, around 10510^5105 strontium-88 atoms are cooled down to below 1μ\muμK and transferred to the vertical arm of the optical mode of a ring cavity. Pumped by lasers red-tuned with respect to the 7.6 7.6~7.6 kHz broad intercombination transition of strontium, the two counterpropagating modes of the ring cavity form a one-dimensional optical lattice in which the atoms, accelerated by gravity, will perform Bloch oscillations. The atomic motion can be monitored in real-time via its impact on the counterpropagating light fields. We present the actual state of the experiment and characterize the laser spectrometer developed to drive the atom-cavity interaction.
Summary form only given. Alkali-earth atoms have an electronic level structure particularly suited for applications in matter-wave interferometry and high-precision laser spectroscopy. Recently atomic strontium was the subject of active research in several fields such as all-optical cooling towards quantum degeneracy and detection of ultra-narrow optical transitions. Because of its small elastic cross-section, we show that ultra-cold88Sr in presence of a lattice potential is also particularly well suited for the realization of inertial sensors to accurately measure forces with micro-metric spatial resolution. By loading the sample into a vertical lattice potential we observe persistent Bloch oscillations with a damping time longer than 10 seconds, and from the measured Bloch frequency we determine the local gravity with a sensitivity of 5 x 10-6g. Our result has direct implications in force measurements at small distances from surfaces such as tests of possible deviations form the Newtonian gravity potential at sub-millimetre distances. We will present the status of a force measurement at distances below 20 mum from dielectric and metallic surfaces, which based on ultra-cold atoms undergoing Bloch oscillations. We will also report on the progress towards the realization of an optical frequency standard based on the highly forbidden1S0-3Po 88Sr intercombination line at 698 nm as well as the realization of a laser suited for precision spectroscopy on this transition.
This dissertation reports on advancements in the construction of a quantum sensor for gravimetry based on matter interferometry. Ultra-cold strontium atoms (in the order of 1 μK) within a ring cavity in the bad cavity regime constitute the experimental setup and two distinct approaches were adopted for the comprehension of the systems operation. The first involved simulations of Ramsey-Bordé pulse sequence, specifically the π/2-π-π/2-spin echo sequence using the 689 nm transition of strontium. The sequence is commonly employed in matter interferometers and the simulations provided insights for future measurements. The expected precision of our system is within Δg/g < 10-8, showcasing its potential accuracy. The second approach focused on monitoring Bloch oscillations resulting from the interaction between atoms and cavity light, which induces a frequency proportional to the external force, in our case, gravity. Efforts were made during the experiment towards confirming the systems regime, leading to a significant observation of nonlinear Normal-mode splitting due to high saturation in the strong coupling regime, exhibiting a bi-stable behaviour.
This thesis describes the first steps to fulfill the main objective of our project: the development of a gravimetry system based on the continuous monitoring of Bloch oscillations performed by ultra-cold strontium atoms.The realization of this project comprises three main stages: the first stage consists in obtaining a magneto-optical trap in the broad transition of 461 nm of strontium, the second stage is the transfer to a magneto-optical trap in the narrow intercombination line of 689 nm, and finally the third stage is the monitoring of Bloch oscillations of the cloud of atoms in a ring cavity.This work details the first stage of the project, the creation of an experimental apparatus which produces ultra-cold strontium atoms in the transition of 461 nm, as well as the characterization of the cloud of atoms, temperature, size, number of atoms, etc.For this project, a new experimental apparatus has been designed and realized.It involves an ultra-high vacuum system, magnetic field sources, laser systems and optical instruments which are required for cooling, trapping and repumping strontium atoms.A novel feature is the implementation of a transversely loaded two-dimensional magneto-optical trap, which serves as a source of a cold strontium atomic beam.A loading rate of the atomic beam into a nearby three-dimensional magneto-optical trap exceeding 10 5 s -1 for the 88 Sr isotope at a moderate dispenser temperature of 600 • C are reported.The temperature of the cloud is about 4 mK and its size 0.3 mm, these characteristics suggest that the state of the atomic trap is in optimal conditions to make the transfer to the optical magneto trap in the intercombination line and thus continue with the second stage of the project.
We describe an ultra-compact (∼10 cm3 physics package) inertial sensor based on atomic matter waves that are guided within an optical lattice during almost the entire interferometer cycle. We demonstrate a large momentum transfer of up to 8 ℏk photon momentum with a combination of Bragg pulses and Bloch oscillations with scalability to larger numbers of photons. Between momentum transfer steps, we maintain the atoms in a co-moving optical lattice waveguide so that the atoms are in free space only during the Bragg pulses. Our guided matter wave approach paves the way for atomic inertial sensing in dynamic environments in which untrapped atoms would otherwise quickly collide with the walls of a miniature chamber.
Atom interferometry is a maturing quantum technology which provides one of the most precise approaches to explore fundamental physics, e.g. to search for dark matter, and one day to observe gravitational waves in the frequency range from 10 mHz - 10 Hz. Standard atom interferometers use Bragg or Raman two-photon transitions for the coherent manipulation of matter waves. In a Michelson configuration for atom-aided gravitational waves detection, two orthogonal arms are built to reject laser noise, in the same way as optical interferometers. Atom interferometers utilizing an optical clock transition for coherent manipulation are less affected by the technical noise of the laser, and as a result that single baseline detectors become feasible.At LP2N, we are building a vertical gravity-gradiometer based on atom interferometry using strontium atoms probed on such a clock transition. The final experimental setup will implement a 6-meter tall atomic fountain to realize gradiometry with two or more separated atomic clouds.In my dissertation, I present the realization of the experimental setup in all its sub-systems, and the first experiments with atoms at millikelvin temperature obtained with the first cooling stage with blue light. The laser system for the second red cooling phase and for the coherent manipulation is ready; meanwhile, we realized a dual-frequency Zeeman slower that improves the atomic flux by a factor of six. We also present a study of an original scheme to achieve pulsed and fast light-atom interaction in a narrow-linewidth cavity by exploiting the Stark shift as a high bandwidth switch; this technique could open to the use of narrow-linewidth cavities – and notably their high power buildup - in several contexts, like atom interferometry and quantum information.
In atomic sensors, continuous interrogation of laser-cooled atoms carries the benefits of improved sensitivity and high measurement bandwidth. However, cooling in proximity to coherent atomic state evolution can degrade performance in compact systems, due to decoherence. This study demonstrates an inertially sensitive matter-wave interferometer in a three-dimensionally-cooled atomic beam that mitigates decoherence while operating continuously. The technique could enable compact atom-interferometer sensors that measure continuously and with high sensitivity on dynamic platforms.