Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Communications and Quantum Imaging

Quantum sensing using thermal photon bunching

Peng Kian Tan, Xi Jie Yeo, Li Jiong Shen, Christian Kurtsiefer

Published Jul 30, 2021• 0 citations
Publisher

Abstract

Classical sensing techniques such as range finding and clock synchronization use timing modulated light sources to provide the timing correlations needed for their implementation. Corresponding quantum schemes utilise spontaneous parametric down converted light sources to provide the timing correlations without the need for timing modulation, although entangled states are too fragile to be fully exploited presently. Here we demonstrate the use of thermal light as an alternative source for timing correlations, via the photon bunching generated from a laser operating below threshold, and showcase its practical viability by successful range finding measurements.

DOI
10.1117/12.2592964

Related papers

Optical Ranging using a Subthreshold Laser Diode

Peng Kian Tan, Christian Kurtsiefer

We demonstrate an optical ranging technique using stationary light implemented on a semiconductor laser diode operating below threshold, with the required time-of-flight information extracted from thermal photon bunching. In contrast, conventional ranging techniques require a light source to be timing modulated in intensity, phase, or frequency, with which to correlate the reference and probe-to-target beams. This reference-probe correlation provides for time-of-flight information from which the target distance can then be measured. Presently, quantum ranging schemes derive timing correlation information from spontaneous parametric down-conversion sources which need not be timing modulated [1] , [2] . However, such light sources are complex and expensive to construct.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•0 citations

Near-lossless method for generating thermal photon-bunched light

Xi Jie Yeo, Darren Ming Zhi Koh, Justin Yu Xiang Peh +2 more

Thermal light sources exhibiting photon bunching have been suggested for sensing applications that exploit timing correlations of stationary light, including range finding, clock synchronization, and non-line-of-sight imaging. However, these proposals have remained unrealized in practice because available sources of photon bunching either possess coherence times too short to be timing resolved by photodetectors, or produce brightness levels too low to tolerate realistic return losses. In this work, we demonstrate a low-loss method for generating photon bunching with a conversion efficiency nearly 9 orders of magnitude higher than that achieved by many other bunching processes.

quant-pharXiv:2602.00633•Feb 3, 2026•0 citations

Quantum lidar using stationary broadband light

Peng Kian Tan, Xi Jie Yeo, Li Jiong Shen +1 more

Conventional optical ranging techniques require timing modulated light sources to provide for the time-of-flight information, which may allow for detection, jamming or decoy by a third-party with information to the modulation pattern. Quantum ranging techniques, or quantum lidar, use spontaneous parametric down converted light sources to provide the timing correlation, where entanglement is not necessarily exploited in the simplementation, and is complex and expensive. Here we propose the use of stationary broadband light generated from a laser diode operating below threshold to provide the timing correlation, as extracted from thermal photon bunching.

Emerging Imaging and Sensing Technologies for Security and Defence•Sep 8, 2021•1 citation

Practical Range Sensing with Thermal Light

Peng Kian Tan, Xi Jie Yeo, Alvin Leow +2 more

Many quantum sensing suggestions rely on temporal correlations found in photon pairs generated by parametric down-conversion. In this work, we show that the temporal correlations in light with a thermal photon statistics can be equally useful for such applications. Using a subthreshold laser diode as an ultrabright source of thermal light, we demonstrate optical range finding to a distance of up to 1.8 km.

arXiv:2303.12338•Physical Review Applied•Jul 27, 2023•5 citations

Thermal light with enhanced oscillating bunching in field-tested photon-counting LIDAR

Theodor Staffas, Jim Cleveborg, Jun Gao +2 more

Abstract Traditional Light Detection and Ranging (LIDAR) systems rely on a modulated light source to encode information in the probe signal to measure distances. Alternatively, thermal LIDAR uses non-modulated thermal sources of bunched light. In this work, we demonstrate a bunched photon source at telecom wavelength, incorporated in a photon-counting LIDAR system, which determines distances by measuring the second-order correlation. The source is a sub-threshold laser spectrally filtered to extend coherence time, producing an oscillating g (2) curve with an enhanced bunching peak. Utilizing this oscillating bunching increases the signal-to-noise ratio and decreases the number of correlation events required to perform a measurement. This system achieves 2 ps resolution in both fiber-based and free-space measurements with up to 65 dB attenuation and ranges up to 87 km in optical fibers. Our approach demonstrates the possibility of increasing the bunching of classical light sources and improving their usability for LIDAR.

Nature Communications•Dec 29, 2025•0 citations

Efficient generation of photon bunched light for clock synchronization

Darren Ming Zhi Koh, Justin Yu Xiang Peh, Zifang Xu +3 more

Photon bunching is the phenomenon in which photons in a light field have a higher than random probability of being grouped together.1 In this work, we demonstrate how narrow-band photon bunched light can be generated efficiently from laser light with −7dB conversion efficiency compared to −100dB with established methods. We then showcase a use for such sources by performing clock synchronization of two separate quartz oscillators, achieving synchronization with frequency offset error of 3:2ppb.

Quantum Communications and Quantum Imaging•Jul 31, 2025•0 citations
Classical sensing techniques such as range finding and clock synchronization use timing modulated light sources to provide the timing correlations needed for their implementation. Corresponding quantum schemes utilise spontaneous parametric down converted light sources to provide the timing correlations without the need for timing modulation, although entangled states are too fragile to be fully exploited presently. Here we demonstrate the use of thermal light as an alternative source for timing correlations, via the photon bunching generated from a laser operating below threshold, and showcase its practical viability by successful range finding measurements.
We demonstrate an optical ranging technique using stationary light implemented on a semiconductor laser diode operating below threshold, with the required time-of-flight information extracted from thermal photon bunching. In contrast, conventional ranging techniques require a light source to be timing modulated in intensity, phase, or frequency, with which to correlate the reference and probe-to-target beams. This reference-probe correlation provides for time-of-flight information from which the target distance can then be measured. Presently, quantum ranging schemes derive timing correlation information from spontaneous parametric down-conversion sources which need not be timing modulated [1] , [2] . However, such light sources are complex and expensive to construct.
Thermal light sources exhibiting photon bunching have been suggested for sensing applications that exploit timing correlations of stationary light, including range finding, clock synchronization, and non-line-of-sight imaging. However, these proposals have remained unrealized in practice because available sources of photon bunching either possess coherence times too short to be timing resolved by photodetectors, or produce brightness levels too low to tolerate realistic return losses. In this work, we demonstrate a low-loss method for generating photon bunching with a conversion efficiency nearly 9 orders of magnitude higher than that achieved by many other bunching processes.
Conventional optical ranging techniques require timing modulated light sources to provide for the time-of-flight information, which may allow for detection, jamming or decoy by a third-party with information to the modulation pattern. Quantum ranging techniques, or quantum lidar, use spontaneous parametric down converted light sources to provide the timing correlation, where entanglement is not necessarily exploited in the simplementation, and is complex and expensive. Here we propose the use of stationary broadband light generated from a laser diode operating below threshold to provide the timing correlation, as extracted from thermal photon bunching.
Abstract Traditional Light Detection and Ranging (LIDAR) systems rely on a modulated light source to encode information in the probe signal to measure distances. Alternatively, thermal LIDAR uses non-modulated thermal sources of bunched light. In this work, we demonstrate a bunched photon source at telecom wavelength, incorporated in a photon-counting LIDAR system, which determines distances by measuring the second-order correlation. The source is a sub-threshold laser spectrally filtered to extend coherence time, producing an oscillating g (2) curve with an enhanced bunching peak. Utilizing this oscillating bunching increases the signal-to-noise ratio and decreases the number of correlation events required to perform a measurement. This system achieves 2 ps resolution in both fiber-based and free-space measurements with up to 65 dB attenuation and ranges up to 87 km in optical fibers. Our approach demonstrates the possibility of increasing the bunching of classical light sources and improving their usability for LIDAR.
Photon bunching is the phenomenon in which photons in a light field have a higher than random probability of being grouped together.1 In this work, we demonstrate how narrow-band photon bunched light can be generated efficiently from laser light with −7dB conversion efficiency compared to −100dB with established methods. We then showcase a use for such sources by performing clock synchronization of two separate quartz oscillators, achieving synchronization with frequency offset error of 3:2ppb.