Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A miniature magnetic waveguide for cold atoms

Moe Key

Published Sep 1, 2000• 0 citations
OpenAlex

Abstract

This thesis presents the first demonstration of a guide for cold atoms based on a miniature structure of four current-carrying wires. The four wires are embedded within a hollow silica fibre. Atoms are guided along the centre of a fifth hole on the axis of the fibre by the Stern-Gerlach force. A vapour cell Magneto Optical Trap (MOT), formed 1 cm above the mouth of the waveguide is the source of cold "8"5Rb atoms. After cooling the atoms to 25 #mu#K in optical molasses they fall under the influence of gravity through a magnetic funnel into the waveguide. After propagating for 2 cm, the atoms are reflected by the field of a small pinch coil wound around the base of the guide. The atoms then travel back up the fibre and out into the funnel, where they can be imaged either in fluorescence or by recapturing in the MOT. A video sequence of atoms falling into the guide and re-emerging after reflection from the pinch coil graphically illustrates the operation of the guide. The coupling efficiency and transverse temperature of the atoms is measured experimentally and in a Monte-Carlo simulation. We find an optimum coupling efficiency of 12% and we measure the spatial extent of the cloud within the fibre to be of order 100 #mu#m. We find good agreement between experimental data and results from the numerical simulation. We have also been able to observe different thresholds for the reflection of different positive m_F levels. In another experiment we are able to trap the atoms in an elongated Ioffe trap for up to two seconds, increasing the distance over which the atoms are guided. We are able to guide the atoms over distances of 40 cm with a loss rate indistinguishable from the free space loss rate. (author)

Related papers

Transport of cold atoms in a miniature guide

M Key, Wilbert Rooijakkers, Edward A. Hinds

We have developed a waveguide for atoms based on magnetic confinement within a hollow glass fibre. Weak-field-seeking atoms are transported along a central hole and are prevented from hitting the wall by the magnetic field due to four current-carrying wires embedded in the fibre. A 'pinch' coil wound around the fibre plugs the guide at one end with a magnetic field strong enough to reflect the weak-field-seeking atoms. We have demonstrated that all the positivemFsublevels of the85RbF= 3 ground state are guided and have made a movie of the atom dynamics.

New Journal of Physics•Oct 1, 2000•2 citations

Propagation of Cold Atoms along a Miniature Magnetic Guide

M. Key, Ifan G. Hughes, Wilbert Rooijakkers +4 more

A cloud of laser-cooled 85Rb atoms is coupled through a magnetic funnel into a miniature waveguide formed by four current-carrying wires embedded in a silica fiber. The atom cloud has a approximately 100 &mgr;m radius within the fiber and propagates over cm distances. We study the coupling, propagation, and transverse distribution of atoms in the fiber, and find good agreement with theory. This prototype demonstrates the feasibility of miniature guides as a tool in the new field of integrated atom optics, leading to single-mode propagation of de Broglie waves and the possible preparation of 1D atom clouds.

Physical Review Letters•Feb 14, 2000•152 citations

Atom guiding in free-space light beams and photonic crystal fibres

J. Livesey

In this thesis I describe experimental work and present data on the guiding of \nRubidium atoms along free-space propagating light beams as well as within hollow \ncore glass fibres, namely photonic crystal fibres. I describe experiments, laser systems \nand vacuum trap assemblies designed to facilitate this guiding. \nThese experiments are intended to aid progression within the field of cold \natom guidance wherein narrow diameter, long distance hollow-fibre guides are a \ncurrent goal. Realisation of these guides could lead to promising applications such as \natom interferometers and spatially accurate, multi-source, atom depositors. \nHerein, guided fluxes are observed in free-space guiding experiments for \ndistances up to 50mm and up to 10GHz red-detuning from resonance. Additionally \nhollow-core, Kagome structured, quasi- and true-photonic crystal fibres are \ncharacterised. Finally a number of detailed fibre-guiding magneto-optic traps are \ndeveloped. \nBoth cold atomic-beams and cold atomic clouds are reliably positioned above \nfibre entrance facets in conjunction with a guiding laser beam coupled into the fibre \ncore. \nIssues regarding optical flux detection outwith fibre confinement appear to \nhave hindered observation of guided atoms. A far more sensitive detection system has \nbeen developed for use in current, ongoing fibre-guide experiments.

•Jan 1, 2007•0 citations

Experimental studies of cold atom guiding using hollow light beams

D. P. Rhodes

This thesis is concerned with the guiding of cold atoms using optical forces, which is of great importance in the field of atom optics. Atomic beams can be used for precision sensor equipment, building nano-scale structures, construction of quantum computers and to further the understanding of the properties of atoms. Atoms are guided along light beams using the dipole force; there are two regimes under which this force works. Typically red-detuned guides are used (atoms are attracted towards the light) such guides, however, require large detuning and high powers. In this thesis we investigate the use of blue-detuned (atoms are repelled from the light) hollow light beams of moderate power (a few hundred mW) and confine atoms in the dark centre of the beams. Several magneto-optical traps (MOTs) have been constructed to exploit different guiding geometries. Hollow beams have been generated using a variety of methods; in particular the use of a computer controlled spatial light modulator (SLM) has provided great versatility and simplicity to the experimental arrangements. First, experiments were performed with a low-velocity intense source (LVIS) of atoms. A co-linear LG beam significantly enhances the observed flux, however, considerable difficulties are encountered loading atoms into oblique guides. Imaging a hole in the walls of the light tube was used to improve the loading efficiency. Second, guiding a free-falling atom cloud is performed using a non-diffracting Bessel beam. It is found that while the potential of the Bessel beam is steeper than equivalent LG beams the power distribution across the beam severely limits its usefulness. The next study investigated higher-order LG guide beams generated with an SLM. High order modes have a narrower profile so confine the atoms with less interaction with the guide beam, leading to a more natural guide (as opposed to a pushing force). Finally the SLM was used to create non-trivial beam shapes for beam splitters and interferometers.

•Jan 1, 2005•0 citations

An optically guided atomic fountain

Hilary Jane Davies

This thesis describes the development of a laser-cooling experiment aimed at efficient transfer of cold atoms over a short distance, for loading into a conservative atom trap. We detail the construction of a 3D magneto-optical trap (MOT) and perform characterisation measurements to optimise the number and temperature of the cold atoms. The atoms are launched vertically in a fountain from the MOT using a 'moving molasses' technique and a red-detuned far-off-resonant laser beam is used to guide them into an UHV chamber. Loading into the guiding beam is optimised with respect to the beam and MOT parameters. We demonstrate a maximum loading of 20% and guiding over a distance of more than 10 cm without loss of atoms. The atoms are delivered to the UHV chamber in a cloud with a transverse dimension of order 200 #mu#m. We discuss the extension to continuous operation of the guided atomic fountain. The 3D MOT is replaced by a funnel with 2D trapping and 3D cooling which continuously extracts the cold atoms using moving molasses. A comparison between the flux of guided atoms obtained in a pulsed fashion from the 3D MOT and continuously from the funnel indicate that the pulsed case is a factor of ten more efficient. The difference is due to inferior loading from the funnel. The optically guided fountain is used to load an optical dipole trap in the UHV chamber, using an 'optical trap door'. No additional cooling is required. The dynamics of the atoms in the optical dipole trap are studied. We discuss multiple loading of a conservative trap with the view of accumulating more atoms than can be obtained in a MOT. (author)

•Jan 1, 1999•0 citations

Integrating cold caesium atoms into optical waveguides

Elisa Da Ros

This project focuses on a novel experimental method for interfacing cold atoms with optical waveguides. This relies on the introduction of cold atoms into microscopic laser-drilled holes that are perpendicular to the propagation axis of the waveguide. Direct interfacing of cold atoms with the guided mode of a waveguide is an attractive mechanism by which to create atom-photon interfaces, as the small mode area increases the interaction rate. Unlike many previous approaches, this technique can be applied in almost any existing waveguide system, including chip-based waveguide arrays and other complex environments. It therefore has great promise as a way of creating hybrid atom-photon quantum devices. Using this method, we demonstrate coupling between cold atoms and the light propagating in the core of an untapered single-mode optical fibre. This was achieved by laser-drilling a cylindrical, transverse hole (30 μm diameter) through the core of the fibre. Ensembles of cold caesium atoms can be tightly confined through an optical dipole trap within the microscopic void. Probe light, resonant with the Cs D2 line, is then coupled into the fibre. By measuring the transmitted optical power through the interface, it was determined that up to 87% of the probe power could be absorbed by the atoms. The corresponding optical depth per unit length of the atom cloud is over 700 cm^(-1), higher than any value reported to date for a comparable system. This will be a key parameter for the miniaturisation of atom-optical systems as well as for enhancing spatial resolution in sensing applications. The dependence of this absorption on several experimental parameters was also characterised and found to be in line with theoretical expectations. The atomic transition is not noticeably broadened by the presence of the fibre. We have also carried out numerical simulations of light transmission across wave-guide junctions of this type, proving that tailored hole geometries can enable enhanced optical transmission. The achievable degree of improvement is such that it is conceivable to place the void within an optical resonator, for example using laser-written Bragg gratings, and to achieve the strong coupling between the atoms and the guided light. Altogether this work demonstrates the potential of this technique to interface atoms with tightly confined light, allowing for integration in otherwise purely photonic circuits. In such environment the interaction between the atomic ensemble and the light can act as a node for the storage and processing of quantum information.

•Dec 31, 2020•0 citations
This thesis presents the first demonstration of a guide for cold atoms based on a miniature structure of four current-carrying wires. The four wires are embedded within a hollow silica fibre. Atoms are guided along the centre of a fifth hole on the axis of the fibre by the Stern-Gerlach force. A vapour cell Magneto Optical Trap (MOT), formed 1 cm above the mouth of the waveguide is the source of cold "8"5Rb atoms. After cooling the atoms to 25 #mu#K in optical molasses they fall under the influence of gravity through a magnetic funnel into the waveguide. After propagating for 2 cm, the atoms are reflected by the field of a small pinch coil wound around the base of the guide. The atoms then travel back up the fibre and out into the funnel, where they can be imaged either in fluorescence or by recapturing in the MOT. A video sequence of atoms falling into the guide and re-emerging after reflection from the pinch coil graphically illustrates the operation of the guide. The coupling efficiency and transverse temperature of the atoms is measured experimentally and in a Monte-Carlo simulation. We find an optimum coupling efficiency of 12% and we measure the spatial extent of the cloud within the fibre to be of order 100 #mu#m. We find good agreement between experimental data and results from the numerical simulation. We have also been able to observe different thresholds for the reflection of different positive m_F levels. In another experiment we are able to trap the atoms in an elongated Ioffe trap for up to two seconds, increasing the distance over which the atoms are guided. We are able to guide the atoms over distances of 40 cm with a loss rate indistinguishable from the free space loss rate. (author)
We have developed a waveguide for atoms based on magnetic confinement within a hollow glass fibre. Weak-field-seeking atoms are transported along a central hole and are prevented from hitting the wall by the magnetic field due to four current-carrying wires embedded in the fibre. A 'pinch' coil wound around the fibre plugs the guide at one end with a magnetic field strong enough to reflect the weak-field-seeking atoms. We have demonstrated that all the positivemFsublevels of the85RbF= 3 ground state are guided and have made a movie of the atom dynamics.
A cloud of laser-cooled 85Rb atoms is coupled through a magnetic funnel into a miniature waveguide formed by four current-carrying wires embedded in a silica fiber. The atom cloud has a approximately 100 &mgr;m radius within the fiber and propagates over cm distances. We study the coupling, propagation, and transverse distribution of atoms in the fiber, and find good agreement with theory. This prototype demonstrates the feasibility of miniature guides as a tool in the new field of integrated atom optics, leading to single-mode propagation of de Broglie waves and the possible preparation of 1D atom clouds.
In this thesis I describe experimental work and present data on the guiding of \nRubidium atoms along free-space propagating light beams as well as within hollow \ncore glass fibres, namely photonic crystal fibres. I describe experiments, laser systems \nand vacuum trap assemblies designed to facilitate this guiding. \nThese experiments are intended to aid progression within the field of cold \natom guidance wherein narrow diameter, long distance hollow-fibre guides are a \ncurrent goal. Realisation of these guides could lead to promising applications such as \natom interferometers and spatially accurate, multi-source, atom depositors. \nHerein, guided fluxes are observed in free-space guiding experiments for \ndistances up to 50mm and up to 10GHz red-detuning from resonance. Additionally \nhollow-core, Kagome structured, quasi- and true-photonic crystal fibres are \ncharacterised. Finally a number of detailed fibre-guiding magneto-optic traps are \ndeveloped. \nBoth cold atomic-beams and cold atomic clouds are reliably positioned above \nfibre entrance facets in conjunction with a guiding laser beam coupled into the fibre \ncore. \nIssues regarding optical flux detection outwith fibre confinement appear to \nhave hindered observation of guided atoms. A far more sensitive detection system has \nbeen developed for use in current, ongoing fibre-guide experiments.
This thesis is concerned with the guiding of cold atoms using optical forces, which is of great importance in the field of atom optics. Atomic beams can be used for precision sensor equipment, building nano-scale structures, construction of quantum computers and to further the understanding of the properties of atoms. Atoms are guided along light beams using the dipole force; there are two regimes under which this force works. Typically red-detuned guides are used (atoms are attracted towards the light) such guides, however, require large detuning and high powers. In this thesis we investigate the use of blue-detuned (atoms are repelled from the light) hollow light beams of moderate power (a few hundred mW) and confine atoms in the dark centre of the beams. Several magneto-optical traps (MOTs) have been constructed to exploit different guiding geometries. Hollow beams have been generated using a variety of methods; in particular the use of a computer controlled spatial light modulator (SLM) has provided great versatility and simplicity to the experimental arrangements. First, experiments were performed with a low-velocity intense source (LVIS) of atoms. A co-linear LG beam significantly enhances the observed flux, however, considerable difficulties are encountered loading atoms into oblique guides. Imaging a hole in the walls of the light tube was used to improve the loading efficiency. Second, guiding a free-falling atom cloud is performed using a non-diffracting Bessel beam. It is found that while the potential of the Bessel beam is steeper than equivalent LG beams the power distribution across the beam severely limits its usefulness. The next study investigated higher-order LG guide beams generated with an SLM. High order modes have a narrower profile so confine the atoms with less interaction with the guide beam, leading to a more natural guide (as opposed to a pushing force). Finally the SLM was used to create non-trivial beam shapes for beam splitters and interferometers.
This thesis describes the development of a laser-cooling experiment aimed at efficient transfer of cold atoms over a short distance, for loading into a conservative atom trap. We detail the construction of a 3D magneto-optical trap (MOT) and perform characterisation measurements to optimise the number and temperature of the cold atoms. The atoms are launched vertically in a fountain from the MOT using a 'moving molasses' technique and a red-detuned far-off-resonant laser beam is used to guide them into an UHV chamber. Loading into the guiding beam is optimised with respect to the beam and MOT parameters. We demonstrate a maximum loading of 20% and guiding over a distance of more than 10 cm without loss of atoms. The atoms are delivered to the UHV chamber in a cloud with a transverse dimension of order 200 #mu#m. We discuss the extension to continuous operation of the guided atomic fountain. The 3D MOT is replaced by a funnel with 2D trapping and 3D cooling which continuously extracts the cold atoms using moving molasses. A comparison between the flux of guided atoms obtained in a pulsed fashion from the 3D MOT and continuously from the funnel indicate that the pulsed case is a factor of ten more efficient. The difference is due to inferior loading from the funnel. The optically guided fountain is used to load an optical dipole trap in the UHV chamber, using an 'optical trap door'. No additional cooling is required. The dynamics of the atoms in the optical dipole trap are studied. We discuss multiple loading of a conservative trap with the view of accumulating more atoms than can be obtained in a MOT. (author)
This project focuses on a novel experimental method for interfacing cold atoms with optical waveguides. This relies on the introduction of cold atoms into microscopic laser-drilled holes that are perpendicular to the propagation axis of the waveguide. Direct interfacing of cold atoms with the guided mode of a waveguide is an attractive mechanism by which to create atom-photon interfaces, as the small mode area increases the interaction rate. Unlike many previous approaches, this technique can be applied in almost any existing waveguide system, including chip-based waveguide arrays and other complex environments. It therefore has great promise as a way of creating hybrid atom-photon quantum devices. Using this method, we demonstrate coupling between cold atoms and the light propagating in the core of an untapered single-mode optical fibre. This was achieved by laser-drilling a cylindrical, transverse hole (30 μm diameter) through the core of the fibre. Ensembles of cold caesium atoms can be tightly confined through an optical dipole trap within the microscopic void. Probe light, resonant with the Cs D2 line, is then coupled into the fibre. By measuring the transmitted optical power through the interface, it was determined that up to 87% of the probe power could be absorbed by the atoms. The corresponding optical depth per unit length of the atom cloud is over 700 cm^(-1), higher than any value reported to date for a comparable system. This will be a key parameter for the miniaturisation of atom-optical systems as well as for enhancing spatial resolution in sensing applications. The dependence of this absorption on several experimental parameters was also characterised and found to be in line with theoretical expectations. The atomic transition is not noticeably broadened by the presence of the fibre. We have also carried out numerical simulations of light transmission across wave-guide junctions of this type, proving that tailored hole geometries can enable enhanced optical transmission. The achievable degree of improvement is such that it is conceivable to place the void within an optical resonator, for example using laser-written Bragg gratings, and to achieve the strong coupling between the atoms and the guided light. Altogether this work demonstrates the potential of this technique to interface atoms with tightly confined light, allowing for integration in otherwise purely photonic circuits. In such environment the interaction between the atomic ensemble and the light can act as a node for the storage and processing of quantum information.