Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Entropy

DLSTM-Based Successive Cancellation Flipping Decoder for Short Polar Codes

Jianming Cui, Wenxiu Kong, Xiaojun Zhang, Da Chen, Qingtian Zeng

Published Jul 6, 2021• 3 citations
Publisher

Abstract

Polar code has been adopted as the control channel coding scheme for the fifth generation (5G), and the performance of short polar codes is receiving intensive attention. The successive cancellation flipping (SC flipping) algorithm suffers a significant performance loss in short block lengths. To address this issue, we propose a double long short-term memory (DLSTM) neural network to locate the first error bit. To enhance the prediction accuracy of the DLSTM network, all frozen bits are clipped in the output layer. Then, Gaussian approximation is applied to measure the channel reliability and rank the flipping set to choose the least reliable position for multi-bit flipping. To be robust under different codewords, padding and masking strategies aid the network architecture to be compatible with multiple block lengths. Numerical results indicate that the error-correction performance of the proposed algorithm is competitive with that of the CA-SCL algorithm. It has better performance than the machine learning-based multi-bit flipping SC (ML-MSCF) decoder and the dynamic SC flipping (DSCF) decoder for short polar codes.

DOI
10.3390/e23070863

Related papers

Learning to Flip Successive Cancellation Decoding of Polar Codes with LSTM Networks

Xianbin Wang, Huazi Zhang, Rong Li +4 more

The key to successive cancellation (SC) flip decoding of polar codes is to accurately identify the first error bit. The optimal flipping strategy is considered difficult due to lack of an analytical solution. Alternatively, we propose a deep learning aided SC flip algorithm. Specifically, before each SC decoding attempt, a long short-term memory (LSTM) network is exploited to either (i) locate the first error bit, or (ii) undo a previous "wrong" flip. In each SC attempt, the sequence of log likelihood ratios (LLRs) derived in the previous SC attempt is exploited to decide which action to take. Accordingly, a two-stage training method of the LSTM network is proposed, i.e., learn to locate first error bits in the first stage, and then to undo "wrong" flips in the second stage. Simulation results show that the proposed approach identifies error bits more accurately and achieves better block error rate performance than the state-of-the-art SC flip algorithms.

arXiv:1902.08394•IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)•Sep 1, 2019•29 citations

A Machine Learning Based Multi-flips Successive Cancellation Decoding Scheme of Polar Codes

He Bi, Shaohua Wu, Yajing Deng +3 more

The flip-successive cancellation (SCF) decoding algorithm is a decoding scheme to improve the performance of the SC decoding algorithm under short code length by flipping erroneous bits in initial SC decoding. The degraded performance of the SCF decoding algorithm is usually caused by the wrong locating of the first erroneous bit or additional erroneous bits. To address this issue, we propose a machine learning based multi-flips SC decoding scheme (ML-MSCF), which can improve the performance of the SCF decoding algorithm with multiple flips based on the long short-term memory (LSTM) network and reinforcement learning (RL). Specifically, we use a LSTM network to locate the first erroneous bit when initial SC decoding fails, then the outputs of the LSTM network are used as the action space of RL to identify additional erroneous bits in the followed procedure. Simulation results show that the proposed scheme can achieve performance improvement of 0.2-0.3dB over the stateof-art SCF decoding algorithm on both the bit error ratio (BER) and the frame error rate (FER) with less decoding latency.

IEEE Vehicular Technology Conference•May 1, 2020•13 citations

Convolutional Neural Network-aided Bit-flipping for Belief Propagation Decoding of Polar Codes

Chieh-Fang Teng, Kuan-Shiuan Ho, Chen-Hsi Derek Wu +2 more

Known for their capacity-achieving abilities, polar codes have been selected as the control channel coding scheme for 5G communications. To satisfy the needs of high throughput and low latency, belief propagation (BP) is chosen as the decoding algorithm. However, in general, the error performance of BP is worse than that of enhanced successive cancellation (SC). Recently, critical-set bit-flipping (CS-BF) is applied to BP decoding to lower the error rate. However, its trial and error process result in even longer latency. In this work, we propose a convolutional neural network-assisted bit-flipping (CNN-BF) mechanism to further enhance BP decoding of polar codes. With carefully designed input data and model architecture, our proposed CNN-BF can achieve much higher prediction accuracy and better error correction capability than CS-BF but with only half latency. It also achieves a lower block error rate (BLER) than SC list (CA-SCL).

arXiv:1911.01704•Nov 5, 2019•4 citations

Error Correction Enhancement in SCL Decoding of Polar Codes Using LSTM Network

Fatemeh Alia, Bahareh Akhbari, Mahmoud Ahmadian‐Attari

Polar codes have been selected as the channel coding scheme for the Enhanced Mobile Broadband (eMBB) control channel in 5G, which requires short length codes. One of the main challenges in utilizing polar codes is the design of low-complexity decoders with adequate error-correcting performance. The Successive Cancellation (SC) decoder was introduced as the first algorithm enabling polar codes to achieve the channel capacity for long codelengths. However, for shorter codelengths, this decoder does not provide satisfactory error-correction performance. To address this limitation, the Successive Cancellation List (SCL) decoder has been proposed, which performs decoding by maintaining a list of candidate paths and selecting the best one based on a path metric. In this paper, we propose improving the error-correction performance of the SCL decoder using concatenated Cyclic Redundancy Check (CRC) codes and Long Short-Term Memory (LSTM) network. Simulation results demonstrate that the proposed method outperforms the Belief Propagation (BP) decoder in terms of Bit Error Rate (BER) curves. Furthermore, the accuracy of the LSTM model in this study improves from 73 percent in previous research to 93.77 percent.

•May 13, 2025•0 citations

An Improved Bit-Flipping Algorithm of Successive Cancellation List Decoding for Polar Codes

Desheng Wang, Jihang Yin, Yonggang Xu +3 more

Polar codes, as the coding scheme for the control channel in fifth-generation mobile communication technology (5G), have attracted widespread attention since their proposal. As a mainstream decoding algorithm for polar codes, the successive cancellation list (SCL) decoder usually improves the error correction performance by increasing the list size, but this method suffers from the problems of high decoding complexity. To address this problem, this paper proposes a layered-search bit-flipping (LS-SCLF) decoding algorithm based on SCL decoding. Firstly, a new flip-bit metric is proposed, which derives a formula to approximate the probability of an error occurring in an information bit. This formula introduces a perturbation parameter to improve the calculation accuracy. Secondly, a compromise scheme for determining the perturbation parameter is proposed. The scheme uses Monte Carlo simulation to determine an optimized parameter for the precise positioning of the first erroneous decoded bit under different decoding conditions. Finally, a layered search strategy is adopted to sequentially search the erroneous decoded bits from the low order to high order, which can correct up to multiple bits at the same time. Simulation results show that the proposed algorithm achieves improved error correction performance with a slight increase in decoding complexity compared to the generalized SCL-Flip (GSCLF) decoding algorithm. This algorithm also achieves a good balance between the error correction performance and decoding complexity.

Mathematics•Oct 27, 2023•2 citations

Low-Complexity LSTM-Assisted Bit-Flipping Algorithm For Successive Cancellation List Polar Decoder

Chun‐Hsiang Chen, Chieh-Fang Teng, An-Yeu Andy Wu

Polar codes have attracted much attention in the past decade due to their capacity-achieving performance. The higher decoding capacity is required for 5G and beyond 5G (B5G). Although the cyclic redundancy check (CRC)- assisted successive cancellation list bit-flipping (CA-SCLF) decoders have been developed to obtain a better performance, the solution to error bit correction (bitflipping) problem is still imperfect and hard to design. In this work, we leverage expert knowledge in communication systems and adopt deep learning (DL) techniques to obtain a better solution. A low-complexity long short-term memory network (LSTM)-assisted CASCLF decoder is proposed to further improve the performance of conventional CA-SCLF and avoid complexity and memory overhead. Our test results show that we can effectively improve the BLER performance by 0.11dB compared to prior work and reduce the complexity and memory overhead by over 30% of the network.

IEEE International Conference on Acoustics Speech and Signal Processing•Apr 9, 2020•23 citations
Polar code has been adopted as the control channel coding scheme for the fifth generation (5G), and the performance of short polar codes is receiving intensive attention. The successive cancellation flipping (SC flipping) algorithm suffers a significant performance loss in short block lengths. To address this issue, we propose a double long short-term memory (DLSTM) neural network to locate the first error bit. To enhance the prediction accuracy of the DLSTM network, all frozen bits are clipped in the output layer. Then, Gaussian approximation is applied to measure the channel reliability and rank the flipping set to choose the least reliable position for multi-bit flipping. To be robust under different codewords, padding and masking strategies aid the network architecture to be compatible with multiple block lengths. Numerical results indicate that the error-correction performance of the proposed algorithm is competitive with that of the CA-SCL algorithm. It has better performance than the machine learning-based multi-bit flipping SC (ML-MSCF) decoder and the dynamic SC flipping (DSCF) decoder for short polar codes.
The key to successive cancellation (SC) flip decoding of polar codes is to accurately identify the first error bit. The optimal flipping strategy is considered difficult due to lack of an analytical solution. Alternatively, we propose a deep learning aided SC flip algorithm. Specifically, before each SC decoding attempt, a long short-term memory (LSTM) network is exploited to either (i) locate the first error bit, or (ii) undo a previous "wrong" flip. In each SC attempt, the sequence of log likelihood ratios (LLRs) derived in the previous SC attempt is exploited to decide which action to take. Accordingly, a two-stage training method of the LSTM network is proposed, i.e., learn to locate first error bits in the first stage, and then to undo "wrong" flips in the second stage. Simulation results show that the proposed approach identifies error bits more accurately and achieves better block error rate performance than the state-of-the-art SC flip algorithms.
The flip-successive cancellation (SCF) decoding algorithm is a decoding scheme to improve the performance of the SC decoding algorithm under short code length by flipping erroneous bits in initial SC decoding. The degraded performance of the SCF decoding algorithm is usually caused by the wrong locating of the first erroneous bit or additional erroneous bits. To address this issue, we propose a machine learning based multi-flips SC decoding scheme (ML-MSCF), which can improve the performance of the SCF decoding algorithm with multiple flips based on the long short-term memory (LSTM) network and reinforcement learning (RL). Specifically, we use a LSTM network to locate the first erroneous bit when initial SC decoding fails, then the outputs of the LSTM network are used as the action space of RL to identify additional erroneous bits in the followed procedure. Simulation results show that the proposed scheme can achieve performance improvement of 0.2-0.3dB over the stateof-art SCF decoding algorithm on both the bit error ratio (BER) and the frame error rate (FER) with less decoding latency.
Known for their capacity-achieving abilities, polar codes have been selected as the control channel coding scheme for 5G communications. To satisfy the needs of high throughput and low latency, belief propagation (BP) is chosen as the decoding algorithm. However, in general, the error performance of BP is worse than that of enhanced successive cancellation (SC). Recently, critical-set bit-flipping (CS-BF) is applied to BP decoding to lower the error rate. However, its trial and error process result in even longer latency. In this work, we propose a convolutional neural network-assisted bit-flipping (CNN-BF) mechanism to further enhance BP decoding of polar codes. With carefully designed input data and model architecture, our proposed CNN-BF can achieve much higher prediction accuracy and better error correction capability than CS-BF but with only half latency. It also achieves a lower block error rate (BLER) than SC list (CA-SCL).
Polar codes have been selected as the channel coding scheme for the Enhanced Mobile Broadband (eMBB) control channel in 5G, which requires short length codes. One of the main challenges in utilizing polar codes is the design of low-complexity decoders with adequate error-correcting performance. The Successive Cancellation (SC) decoder was introduced as the first algorithm enabling polar codes to achieve the channel capacity for long codelengths. However, for shorter codelengths, this decoder does not provide satisfactory error-correction performance. To address this limitation, the Successive Cancellation List (SCL) decoder has been proposed, which performs decoding by maintaining a list of candidate paths and selecting the best one based on a path metric. In this paper, we propose improving the error-correction performance of the SCL decoder using concatenated Cyclic Redundancy Check (CRC) codes and Long Short-Term Memory (LSTM) network. Simulation results demonstrate that the proposed method outperforms the Belief Propagation (BP) decoder in terms of Bit Error Rate (BER) curves. Furthermore, the accuracy of the LSTM model in this study improves from 73 percent in previous research to 93.77 percent.
Polar codes, as the coding scheme for the control channel in fifth-generation mobile communication technology (5G), have attracted widespread attention since their proposal. As a mainstream decoding algorithm for polar codes, the successive cancellation list (SCL) decoder usually improves the error correction performance by increasing the list size, but this method suffers from the problems of high decoding complexity. To address this problem, this paper proposes a layered-search bit-flipping (LS-SCLF) decoding algorithm based on SCL decoding. Firstly, a new flip-bit metric is proposed, which derives a formula to approximate the probability of an error occurring in an information bit. This formula introduces a perturbation parameter to improve the calculation accuracy. Secondly, a compromise scheme for determining the perturbation parameter is proposed. The scheme uses Monte Carlo simulation to determine an optimized parameter for the precise positioning of the first erroneous decoded bit under different decoding conditions. Finally, a layered search strategy is adopted to sequentially search the erroneous decoded bits from the low order to high order, which can correct up to multiple bits at the same time. Simulation results show that the proposed algorithm achieves improved error correction performance with a slight increase in decoding complexity compared to the generalized SCL-Flip (GSCLF) decoding algorithm. This algorithm also achieves a good balance between the error correction performance and decoding complexity.
Polar codes have attracted much attention in the past decade due to their capacity-achieving performance. The higher decoding capacity is required for 5G and beyond 5G (B5G). Although the cyclic redundancy check (CRC)- assisted successive cancellation list bit-flipping (CA-SCLF) decoders have been developed to obtain a better performance, the solution to error bit correction (bitflipping) problem is still imperfect and hard to design. In this work, we leverage expert knowledge in communication systems and adopt deep learning (DL) techniques to obtain a better solution. A low-complexity long short-term memory network (LSTM)-assisted CASCLF decoder is proposed to further improve the performance of conventional CA-SCLF and avoid complexity and memory overhead. Our test results show that we can effectively improve the BLER performance by 0.11dB compared to prior work and reduce the complexity and memory overhead by over 30% of the network.