Quantum computers are reaching a level where interactions between classical and quantum computations can happen in real-time. This marks the advent of a new, broader class of quantum circuits: dynamic quantum circuits. They offer a broader range of available computing primitives that lead to new challenges for design tasks such as simulation, compilation, and verification. Due to the non-unitary nature of dynamic circuit primitives, existing techniques for these tasks are no longer applicable in an out-of-the-box fashion. In this work, we discuss the resulting consequences for quantum circuit verification and present first ideas for corresponding automatic methods. More precisely, we propose two different schemes that eventually allow to treat the involved circuits as if they were not dynamic at all. By this, we provide a basis for applying existing techniques for quantum circuit verification to this broader class of circuits.
Quantum computers are reaching a level where interactions between classical and quantum computations can happen in real-time. This marks the advent of a new, broader class of quantum circuits: dynamic quantum circuits. They offer a broader range of available computing primitives that lead to new challenges for design tasks such as simulation, compilation, and verification. Due to the non-unitary nature of dynamic circuit primitives, existing techniques for these tasks are no longer applicable in an out-of-the-box fashion. In this work, we discuss the resulting consequences for quantum circuit verification and present first ideas for corresponding automatic methods. More precisely, we propose two different schemes that eventually allow to treat the involved circuits as if they were not dynamic at all. By this, we provide a basis for applying existing techniques for quantum circuit verification to this broader class of circuits.
Quantum computers are reaching a level where interactions between classical and quantum computations can happen in real-time. This marks the advent of a new, broader class of quantum circuits: dynamic quantum circuits. They offer a broader range of available computing primitives that lead to new challenges for design tasks such as simulation, compilation, and verification. Due to the non-unitary nature of dynamic circuit primitives, most existing techniques and tools for these tasks are no longer applicable in an out-of-the-box fashion. In this work, we discuss the resulting consequences for quantum circuit verification, specifically equivalence checking, and propose two different schemes that eventually allow to treat the involved circuits as if they did not contain non-unitaries at all. As a result, we demonstrate methodically, as well as, experimentally that existing techniques for verifying the equivalence of quantum circuits can be kept applicable for this broader class of circuits.
Quantum computers promise to efficiently solve important problems classical computers never will. However, in order to capitalize on these prospects, a fully automated quantum software stack needs to be developed. This involves a multitude of complex tasks from the classical simulation of quantum circuits, over their compilation to specific devices, to the verification of the circuits to be executed as well as the obtained results. All of these tasks are highly non-trivial and necessitate efficient data structures to tackle the inherent complexity. Starting from rather straight-forward arrays over decision diagrams (inspired by the design automation community) to tensor networks and the ZX-calculus, various complementary approaches have been proposed. This work provides a look "under the hood" of today's tools and showcases how these means are utilized in them, e.g., for simulation, compilation, and verification of quantum circuits.
Quantum computing is an emerging technology that has the potential to change the perspectives and applications of computing in general. A wide range of applications are enabled: from faster algorithmic solutions of classically still difficult problems to theoretically more secure communication protocols. A quantum computer uses the quantum mechanical effects of particles or particle-like systems, and a major similarity between quantum and classical computers consists of both being abstracted as information processing machines. Whereas a classical computer operates on classical digital information, the quantum computer processes quantum information, which shares similarities with analog signals. One of the central differences between the two types of information is that classical information is more fault-tolerant when compared to its quantum counterpart. Faults are the result of the quantum systems being interfered by external noise, but during the last decades quantum error correction codes (QECC) were proposed as methods to reduce the effect of noise. Reliable quantum circuits are the result of designing circuits that operate directly on encoded quantum information, but the circuit’s reliability is also increased by supplemental redundancies, such as sub-circuit repetitions. Reliable quantum circuits have not been widely used, and one of the major obstacles is their vast associated resource overhead, but recent quantum computing architectures show promising scalabilities. Consequently the number of particles used for computing can be more easily increased, and that the classical control hardware (inherent for quantum computation) is also more reliable. Reliable quantum circuits haev been investigated for almost as long as general quantum computing, but their limited adoption (until recently) has not generated enough interest into their systematic design. The continuously increasing practical relevance of reliability motivates the present thesis to investigate some of the first answers to questions related to the background and the methods forming a reliable quantum circuit design stack. The specifics of quantum circuits are analysed from two perspectives: their probabilistic behaviour and their topological properties when a particular class of QECCs are used. The quantum phenomena, such as entanglement and superposition, are the computational resources used for designing quantum circuits. The discrete nature of classical information is missing for quantum information. An arbitrary quantum system can be in an infinite number of states, which are linear combinations of an exponential number of basis states. Any nontrivial linear combination of more than one basis states is called a state superposition. The effect of superpositions becomes evident when the state of the system is inferred (measured), as measurements are probabilistic with respect to their output: a nontrivial state superposition will collapse to one of the component basis states, and the measurement result is known exactly only after the measurement. A quantum system is, in general, composed from identical subsystems, meaning that a quantum computer (the complete system) operates on multiple similar particles (subsystems). Entanglement expresses the impossibility of separating the state of the subsystems from the state of the complete system: the nontrivial interactions between the subsystems result into a single indivisible state. Entanglement is an additional source of probabilistic behaviour: by measuring the state of a subsystem, the states of the unmeasured subsystems will probabilistically collapse to states from a well defined set of possible states. Superposition and entanglement are the building blocks of quantum information teleportation protocols, which in turn are used in state-of-the-art fault-tolerant quantum computing architectures. Information teleportation implies that the state of a subsystem is moved to a second subsystem without copying any information during the process. The probabilistic approach towards the design of quantum circuits is initiated by the extension of classical test and diagnosis methods. Quantum circuits are modelled similarly to classical circuits by defining gate-lists, and missing quantum gates are modelled by the single missing gate fault. The probabilistic approaches towards quantum circuits are facilitated by comparing these to stochastic circuits, which are a particular type of classical digital circuits. Stochastic circuits can be considered an emulation of analogue computing using digital components. A first proposed design method, based on the direct comparison, is the simulation of quantum circuits using stochastic circuits by mapping each quantum gate to a stochastic computing sub-circuit. The resulting stochastic circuit is compiled and simulated on FPGAs. The obtained results are encouraging and illustrate the capabilities of the proposed simulation technique. However, the exponential number of possible quantum basis states was translated into an exponential number of stochastic computing elements. A second contribution of the thesis is the proposal of test and diagnosis methods for both stochastic and quantum circuits. Existing verification (tomographic) methods of quantum circuits were targeting the reconstruction of the gate-lists. The repeated execution of the quantum circuit was followed by different but specific measurement at the circuit outputs. The similarities between stochastic and quantum circuits motivated the proposal of test and diagnosis methods that use a restricted set of measurement types, which minimise the number of circuit executions. The obtained simulation results show that the proposed validation methods improve the feasibility of quantum circuit tomography for small and medium size circuits. A third contribution of the thesis is the algorithmic formalisation of a problem encountered in teleportation-based quantum computing architectures. The teleportation results are probabilistic and require corrections represented as quantum gates from a particular set. However, there are known commutation properties of these gates with the gates used in the circuit. The corrections are not applied as dynamic gate insertions (during the circuit’s execution) into the gate-lists, but their effect is tracked through the circuit, and the corrections are applied only at circuit outputs. The simulation results show that the algorithmic solution is applicable for very large quantum circuits. Topological quantum computing (TQC) is based on a class of fault-tolerant quantum circuits that use the surface code as the underlying QECC. Quantum information is encoded in lattice-like structures and error protection is enabled by the topological properties of the lattice. The 3D structure of the lattice allows TQC computations to be visualised similarly to knot diagrams. Logical information is abstracted as strands and strand interactions (braids) represent logical quantum gates. Therefore, TQC circuits are abstracted using a geometrical description, which allows circuit input-output transformations (correlations) to be represented as geometric sub-structures. TQC design methods were not investigated prior to this work, and the thesis introduces the topological computational model by first analysing the necessary concepts. The proposed TQC design stack follows a top-down approach: an arbitrary quantum circuit is decomposed into the TQC supported gate set; the resulting circuit is mapped to a lattice of appropriate dimensions; relevant resulting topological properties are extracted and expressed using graphs and Boolean formulas. Both circuit representations are novel and applicable to TQC circuit synthesis and validation. Moreover, the Boolean formalism is broadened into a formal mechanism for proving circuit correctness. The thesis introduces TQC circuit synthesis, which is based on a novel logical gate geometric description, whose formal correctness is demonstrated. Two synthesis methods are designed, and both use a general planar representation of the circuit. Initial simulation results demonstrate the practicality and performance of the methods. An additional group of proposed design methods solves the problem of automatic correlation construction. The methods use validity criteria which were introduced and analysed beforehand in the thesis. Input-output correlations existing in the circuit are inferred using both the graph and the Boolean representation. The thesis extends the TQC state-of-the-art by recognising the importance of correlations in the validation process: correlation construction is used as a sub-routine for TQC circuit validation. The presented cross-layer validation procedure is useful when investigating both the QECC and the circuit, while a second proposed method is QECC-independent. Both methods are scalable and applicable even to very large circuits. The thesis completes with the analysis of TQC circuit identities, where the developed Boolean formalism is used. The proofs of former known circuit identities were either missing or complex, and the presented approach reduces the length of the proofs and represents a first step towards standardising them. A new identity is developed and detailed during the process of illustrating the known circuit identities. Reliable quantum circuits are a necessity for quantum computing to become reality, and specialised design methods are required to support the quest for scalable quantum computers. This thesis used a twofold approach towards this target: firstly by focusing on the probabilistic behaviour of quantum circuits, and secondly by considering the requirements of a promising quantum computing architecture, namely TQC. Both approaches resulted in a set of design methods enabling the investigation of reliable quantum circuits. The thesis contributes with the proposal of a new quantum simulation technique, no
Quantum technologies are progressing at an extraordinary pace and are poised to transform numerous sectors both nationally and globally. Among them, quantum computing stands out for its potential to revolutionize areas such as cryptography, optimization, and the simulation of quantum systems, offering dramatic speed-ups for specific classes of problems. As quantum devices evolve and become increasingly pervasive, guaranteeing their correctness is of paramount importance. This necessitates the development of rigorous methods and tools to analyze and verify their behavior. However, the construction of such verification frameworks presents fundamental challenges. Quantum phenomena such as superposition and entanglement give rise to computational behaviors that differ profoundly from those of classical systems, leading to inherently probabilistic models and exponentially large state spaces, even for relatively small programs. Addressing these challenges requires building on the extensive expertise of the formal methods community in classical program verification, while incorporating recent advances and collaborative efforts in quantum systems. An interesting challenge for the verification community is to design and implement novel verification frameworks that transfer the key strengths of classical verification, such as expressive specification, precise error detection, automation, and scalability, to the quantum domain. We expect that the results of this research will play a crucial role in enabling the dependable deployment of quantum technologies across a wide range of future applications.
The verification of quantum circuits is a fundamental challenge in quantum computing, largely due to the exponential growth in the complexity of possible circuits. Current methods often rely on simulation, which quickly becomes intractable for larger circuits. This paper introduces a novel approach, "Linear Telescoping," designed to address this problem. Linear Telescoping decomposes a complex quantum circuit into a sequence of simpler operations, each amenable to verification using classical linear algebra. This dramatically reduces the computational burden by transforming the verification problem into a series of manageable, linear verification tasks. The core idea revolves around representing quantum operations as matrices and using techniques from linear algebra to assess their correctness. We present a detailed framework for Linear Telescoping, outlining the steps involved in breaking down a circuit, representing operations as matrices, and performing the linear verification. The approach offers a promising path towards scalable quantum circuit verification, although it's important to note limitations regarding circuit structure and potential overheads. This paper explores the theoretical foundations of Linear Telescoping and lays out a blueprint for future research in this area.
Quantum circuit compilation is a crucial step in the realization of quantum computation, transforming high-level quantum algorithms into gate-level operations executable on specific quantum hardware. However, this process is inherently complex and susceptible to errors, including gate decomposition errors, qubit mapping errors, and resource allocation errors. These errors can significantly degrade the fidelity of the final computation. This paper proposes and investigates the application of formal verification techniques to guarantee the correctness of quantum circuit compilation. We demonstrate how model checking and formal methods can be applied to rigorously verify that the compilation algorithm adheres to predefined constraints, such as preserving quantum properties like unitary evolution and qubit orthogonality. The core claim is that formal verification offers a robust solution to the challenges of detecting and preventing errors in quantum compilation. The proposed approach significantly advances the reliability and trustworthiness of quantum computing by providing a rigorous method for ensuring compilation accuracy. We outline a framework for applying these techniques, focusing on key constraints and illustrating their application through a simplified compilation scenario.