With the advent of 5th generation (5G) mobile communication era, higher requirements are put forward for ultra-reliable and low-latency transmission compared with 4G, especially in the field of short packet communication. In this paper, we propose a segmented cyclic redundancy check aided order statistical decoding algorithm with multiple biases (BIAS- SCRC-OSD) for short polar codes. This algorithm constructs multiple information sets by repeatedly adding bias value, and selects more effective information sets to improve the decoding performance. For further improving the decoding performance, we change the original cyclic redundancy check (CRC) into segment check. The simulation results show that a suitable bias value can significantly improve the decoding performance with a small increase in computational complexity. Compared with the original CRC-aided order statistical decoding (OSD) algorithm, the proposed algorithm has a gain of about 0.8 dB at target bit error rate (BER) 10-4with code rate R = 0.5 and code length N = 64.
With the advent of 5th generation (5G) mobile communication era, higher requirements are put forward for ultra-reliable and low-latency transmission compared with 4G, especially in the field of short packet communication. In this paper, we propose a segmented cyclic redundancy check aided order statistical decoding algorithm with multiple biases (BIAS- SCRC-OSD) for short polar codes. This algorithm constructs multiple information sets by repeatedly adding bias value, and selects more effective information sets to improve the decoding performance. For further improving the decoding performance, we change the original cyclic redundancy check (CRC) into segment check. The simulation results show that a suitable bias value can significantly improve the decoding performance with a small increase in computational complexity. Compared with the original CRC-aided order statistical decoding (OSD) algorithm, the proposed algorithm has a gain of about 0.8 dB at target bit error rate (BER) 10-4with code rate R = 0.5 and code length N = 64.
Novel successive cancellation list (SCL) decoding schemes of Polar codes by exploiting the error correction (EC) capability of the cyclic redundancy check (CRC) codes are proposed in this paper. Different from the schemes in the literature that only considered the error detection capability of CRC, the proposed schemes aim to improve the performance of CRC-aided Polar decoding to the most by benefiting from the potential EC capability of CRC. Specifically, we first propose a basic decoding scheme, named CRC error-correction-aided successive cancellation list (CRC-EC-SCL) decoding, by introducing the look-up-table-based CRC EC method into the Polar SCL decoding process. Then, based on the basic scheme, we further propose the segmented-CRC-EC-SCL decoding scheme. By segmented-CRC, the information block is divided into multiple segments and each segment is attached with a shorter CRC sequence. By conducting the CRC-EC-aided coding for each of the segments, multiple erroneous bits can be corrected early and error propagation can, thus, be efficiently suppressed. The simulation results show that both of the proposed decoding schemes have a significant performance gain over the classic CRC-EC-SCL decoding scheme. Especially for the segmented-CRC-EC-SCL, the performance gain at a frame error rate of 10−4is about 0.4 dB. Moreover, the average computation complexity of the segmented-CRC-EC-SCL is close to the classic scheme.
Polar codes have garnered significant attention since they were proposed due to their capacity-achieving properties and their low-complexity decoding process, and they were selected as the coding scheme for the control channel in 5G mobile communication technology. A successive cancellation list (SCL) decoder, aided by a cyclic redundancy check (CRC), performs the competitive error correcting performance for polar codes compared to other sophisticated codes. The SCL-Flip decoding algorithm is proposed to enhance the error correction performance of the SCL. However, the SCL-Flip is hampered by a high decoding complexity due to the necessary selection and sorting process of path metrics (PMs). Additionally, it requires a large number of iterations to achieve a good error correction performance. In this paper, we propose the error segment bit-flip (ES-SCL-Flip) decoding algorithm, a simplified bit-flip approach for the SCL decoder based on analyzing the distributions of the first error bit. Firstly, we construct an index set with a high probability of the first erroneous bit. Second, a bit-flip criterion is introduced to prevent the costly operation of the PM selection and sorting without compromising the error correction performance. Finally, a search strategy is employed that utilizes segmented error indication to target and rectify the initial error segment sequentially. The simulation results demonstrate that the ES-SCL-Flip decoder provides an improved error correction performance with only a minimal increase in decoding complexity compared to the conventional CRC-aided SCL decoder. This algorithm attains a commendable equilibrium between the error correction performance and decoding complexity.
In this paper, we propose a pre-configured error pattern ordered statistics decoding (PEPOSD) algorithm and discuss its application to short cyclic redundancy check (CRC)-polar codes. Unlike the traditional OSD that changes the most reliable independent symbols, we regard the decoding process as testing the error patterns, like guessing random additive noise decoding (GRAND). Also, the pre-configurator referred from ordered reliability bits (ORB) GRAND can better control the range and testing order of EPs. An offline-online structure can accelerate the decoding process. Additionally, we also introduce two orders to optimize the search order for testing EPs. Compared with CRC-aided OSD and list decoding, PEPOSD can achieve a better trade-off between accuracy and complexity.
Although iterative decoding of polar codes has recently made huge progress based on the idea of permuted factor graphs, it still suffers from a non-negligible performance degradation when compared to state-of-the-art CRC-aided successive cancellation list (CA-SCL) decoding. In this work, we show that iterative decoding of polar codes based on the belief propagation list (BPL) algorithm can approach the error-rate performance of CA-SCL decoding and, thus, can be efficiently used for decoding the standardized 5G polar codes. Rather than only utilizing the cyclic redundancy check (CRC) as a stopping condition (i.e., for error-detection), we also aim to benefit from the error-correction capabilities of the outer CRC code. For this, we develop two distinct soft-decision CRC decoding algorithms: a Bahl-Cocke-Jelinek-Raviv (BCJR)-based approach and a sum product algorithm (SPA)-based approach. Further, an optimized selection of permuted factor graphs is analyzed and shown to reduce the decoding complexity significantly. Finally, we benchmark the proposed CRC-aided belief propagation list (CA-BPL) decoding to state-of-the-art 5G polar codes under CA-SCL decoding and, thereby, showcase an error-rate performance not just close to the CA-SCL but also close to the maximum likelihood (ML) bound as estimated by ordered statistic decoding (OSD).
Polar codes are the first class of error correcting codes that provably achieve the channel capacity at infinite code length. They were selected for use in the fifth generation of cellular mobile communications (5G). In practical scenarios such as 5G, a cyclic redundancy check (CRC) is concatenated with polar codes to improve their finite length performance. This is mostly beneficial for sequential successive-cancellation list decoders. However, for parallel iterative belief propagation (BP) decoders, CRC is only used as an early stopping criterion with incremental error-correction performance improvement. In this paper, we first propose a CRC-polar BP (CPBP) decoder by exchanging the extrinsic information between the factor graph of the polar code and that of the CRC. We then propose a neural CPBP (NCPBP) algorithm which improves the CPBP decoder by introducing trainable normalizing weights on the concatenated factor graph. Our results on a 5G polar code of length 128 show that at the frame error rate of 10-5and with a maximum of 30 iterations, the error-correction performance of CPBP and NCPBP are approximately 0.25 dB and 0.5 dB better than that of the conventional CRC-aided BP decoder, respectively, while introducing almost no latency overhead.
We investigate the cyclic redundancy check (CRC) codes aided successive cancellation list (SCL) decoding schemes to improve the performance of Polar codes. Distinguished from the existing literatures of Polar codes that only consider the error detection capability of CRC, we attempt to take advantage of the inherent error correction capability of CRC and we first devise a segmented CRC-error-correcting aided SCL decoding (SCC-SCL) framework. Based on this framework, an error-correcting table based SCC-SCL (ET-SCC-SCL) decoding scheme is proposed, by introducing the look-up-table based CRC error correction method into the segmented Polar SCL decoding process. Since the error correction capability is limited by the size of the look-up table, which in turn limits the performance gain, we further propose a deep learning based SCC-SCL (DL-SCC-SCL) decoding scheme. In this scheme, a long short-term memory (LSTM) network replaces the error correction table to perform error correction, combining the sequence of log likelihood ratios (LLRs) with the syndromes to determine the error patterns. Simulation results show that both of the proposed decoding schemes have significant performance gain over the classic CRC error-detection aided SCL decoding scheme. Especially for the DL-SCC-SCL, the performance gain at bit error rate of 10-5is about 0.5 dB.