Abstract The aim of the paper is the derivation of formulas for the capacities of a classical–quantum communication channel with Gaussian noise, which are analogs of the classical capacities and arise in many problems of quantum information theory, on a simple, heuristic and physically intuitively clear level. The classical capacity of a classical communication channel with limited frequency band and Gaussian information states diverges as noise tends to zero. In a consistent quantum consideration, the divergence is removed, which is a consequence of the fundamental physical principle of indistinguishability of particles—bosons in information states.
Abstract The aim of the paper is the derivation of formulas for the capacities of a classical–quantum communication channel with Gaussian noise, which are analogs of the classical capacities and arise in many problems of quantum information theory, on a simple, heuristic and physically intuitively clear level. The classical capacity of a classical communication channel with limited frequency band and Gaussian information states diverges as noise tends to zero. In a consistent quantum consideration, the divergence is removed, which is a consequence of the fundamental physical principle of indistinguishability of particles—bosons in information states.
Abstract The present paper is devoted to investigation of the classical capacity of infinite-dimensional continuous variable quantum measurement channels. A number of usable conditions are introduced that enable us to apply previously obtained general results to specific models, in particular, to the multi-mode bosonic Gaussian measurement channels. An explicit formula for the classical capacity of the Gaussian measurement channel is obtained in this paper without assuming the global gauge symmetry, solely under certain ‘threshold condition’. The result is illustrated by the capacity computation for a one-mode squeezed-noise heterodyne measurement channel.
We will begin with a simple type of stationary stochastic1 systems of quantum physics using them within a frame of the Shannon Information Theory and Thermodynamics but starting with their algebraic representation. Based on this algebraic description a model of information transmission in those systems by defining the Shannon information will be stated in terms of variable about the system state. Measuring on these system is then defined as a spectral decomposition of measured quantities operators. The information capacity formulas, now of the narrow-band nature, are derived consequently, for the simple system governed by the Bose–Einstein (B–E) Law [bosonic (photonic) channel] and that one governed by the Fermi-Dirac (F–D) Law [fermionic (electron) channel]. The not-zero value for the average input energy needed for information transmission existence in F–D systems is stated [11, 12].
In this thesis we study the information transmission through Gaussian quantum channels. Gaussian quantum channels model physical communication links, such as free space communication or optical fibers and therefore, may be considered as the most relevant quantum channels. One of the central characteristics of any communication channel is its capacity. In this work we are interested in the classical capacity, which is the maximal number of bits that can be reliably transmitted per channel use. An important lower bound on the classical capacity is given by the Gaussian capacity, which is the maximal transmission rate with the restriction that only Gaussian encodings are allowed: input messages are encoded in so-called Gaussian states for which the mean field amplitudes are Gaussian distributed. We focus in this work mainly on the Gaussian capacity for the following reasons. First, Gaussian encodings are easily accessible experimentally. Second, the difficulty of studying the classical capacity, which arises due to an optimization problem in an infinite dimensional Hilbert space, is greatly reduced when considering only Gaussian input encodings. Third, the Gaussian capacity is conjectured to coincide with the classical capacity, even though this longstanding conjecture is unsolved until today. We start with the investigation of the capacities of the single-mode Gaussian channel. We show that the most general case can be reduced to a simple, fiducial Gaussian channel which depends only on three parameters: its transmissivity (or gain), the added noise variance and the squeezing of the noise. Above a certain input energy threshold, the optimal input variances are given by a quantum water-filling solution, which implies that the optimal modulated output state is a thermal state. This is a quantum extension (or generalization) of the well-known classical water-filling solution for parallel Gaussian channels. Below the energy threshold the solution is given by a transcendental equation and only the less noisy quadrature is modulated. We characterize in detail the dependence of the Gaussian capacity on its channel parameters. In particular, we show that the Gaussian capacity is a non-monotonous function of the noise squeezing and analytically specify the regions where it exhibits one maximum, a maximum and a minimum, a saddle point or no extrema. Then, we investigate the case of n-mode channels with noise correlations (i.e. memory), where we focus in particular on the classical additive noise channel. We consider memory models for which the noise correlations can be unraveled by a passive symplectic transformation. Therefore, we can simplify the problem to the study of the Gaussian capacity in an uncorrelated basis, which corresponds to the Gaussian capacity of n single-mode channels with a common input energy constraint. Above an input energy threshold the solutions is given by a global quantum water-filling solution, which implies that all modulated single-mode output states are thermal states with the same temperature. Below the threshold the channels are divided into three sets: i) those that are excluded from information transmission, ii) those for which only the less noisy quadrature is modulated, and iii) those for which the quantum water-filling solution is satisfied. As an example we consider a Gauss-Markov correlated noise, which in the uncorrelated basis corresponds to a collection of single-mode classical additive noise channels. When rotating the collection of optimal single-mode input states back to the original, correlated basis the optimal multi-mode input state becomes a highly entangled state. We then compare the performance of the optimal input state with a simple coherent state encoding and conclude that one gains up to 10% by using the optimal encoding. Since the preparation of the optimal input state may be very challenging we consider sub-optimal Gaussian-matrix product states (GMPS) as input states as well. GMPS have a known experimental setup and, though being heavily entangled, can be generated sequentially. We demonstrate that for the Markovian correlated noise as well as for a non-Markovian noise model in a wide range of channel parameters, a nearest-neighbor correlated GMPS achieves more than 99.9% of the Gaussian capacity. At last, we introduce a new noise model for which the GMPS is the exact optimal input state. Since GMPS are known to be ground states of quadratic Hamiltonians this suggests a starting point to develop links between optimization problems of quantum communication and many body physics.
The classical capacity of quantum channels is the tight upper bound for the transmission rate of classical information. This is a quantum counterpart of the foundational notion of the channel capacity introduced by Shannon. Bosonic Gaussian quantum channels provide a good model for optical communications. In order to properly define the classical capacity for these quantum systems, an energy constraint at the channel input is necessary, as in the classical case. A further restriction to Gaussian input ensembles defines the Gaussian (classical) capacity, which can be studied analytically. It also provides a lower bound on the classical capacity and moreover, it is conjectured to coincide with the classical capacity. Therefore, the Gaussian capacity is a useful and important notion in quantum information theory. Recently, we have shown that the study of both the classical and Gaussian capacity of an arbitrary single mode Gaussian quantum channel can be reduced to the study of a particular fiducial channel. In this work we consider the Gaussian capacity of the fiducial channel, discuss its additivity and analyze its dependence on the channel parameters. In addition, we extend previously obtained results on the optimal channel environment to the single mode fiducial channel. In particular, we show that the optimal channel environment for the lossy, amplification, and phase conjugating channels is given by a pure quantum state if its energy is constrained.
In most communication scenarios, sending a symbol encoded in a quantum state requires spending resources such as energy, which can be quantified by a cost of communication. A standard approach in this context is to quantify the performance of communication protocol by classical capacity, quantifying the maximal amount of information that can be transmitted through a quantum channel per single use of the channel. However, different figures of merit are also possible and a particularly well-suited one is the classical capacity per unit cost, which quantifies the maximal amount of information that can be transmitted per unit cost. I generalize this concept to account for the quantum nature of the information carriers and communication channels and show that if there exists a state with cost equal to zero, e.g., a vacuum state, the capacity per unit cost can be expressed by a simple formula containing maximization of the relative entropy between two quantum states. This enables me to analyze the behavior of photon information efficiency for general communication tasks and show simple bounds on the capacity per unit cost in terms of quantities familiar from quantum estimation theory. I calculate also the capacity per unit cost for general Gaussian quantum channels.
The classical capacity of a noisy optical channel is the maximum rate at which information can be transmitted reliably, given a constraint on the mean input energy. For the ubiquitous bosonic Gaussian channels, which include standard models of loss and noise in fibre and free-space optical links, determining this rate requires addressing whether entanglement between channel uses or non-Gaussian signals can outperform Gaussian encodings. More precisely, the question is whether the energy-constrained Holevo information is additive across arbitrarily many channel uses and coincides with its Gaussian counterpart. We answer these fundamental questions in the affirmative for every single-mode bosonic Gaussian channel at every input energy. Namely, we prove that independently prepared Gaussian states with Gaussian-distributed random displacements achieve the capacity, including in the low-energy regime where squeezing the signals competes with encoding information in their displacement. Our proof connects an entanglement inequality to a sharp, additive lower bound on output entropy. We then characterise communication above capacity: under a strict total photon-number cutoff, the probability of correct decoding decreases exponentially with the number of channel uses, and we derive explicit bounds on the decay exponent. When only the mean photon number is constrained, a simple energy-rescaling formula determines exactly the entire asymptotic rate--error trade-off: the capacity at mean photon number N and allowed average decoding error ε equals the vanishing-error capacity at mean photon number N/(1−ε). Together, these results identify the ultimate limits of classical communication for some of the most fundamental models of optical communication.