Parametric devices have become a stepping stone in our development of modern technology and new scientific discoveries. They play a role in making astronomical observations with the use of parametric amplifiers as high-sensitivity low-noise first stage amplifiers, or in modern communications as amplifiers of optical frequency light. In addition, parametric devices have been successfully implemented in optomechanics to ''cool'' or ''heat'' mechanical motion. In fact, with such systems it has been possible to ``cool'' the motion of a mirror down to its quantum ground state, which is the lowest state of motion obtainable due to the quantum limit. The most common systems of the time consist of optical systems using optical cavities and fiber optics, or micro systems using planar superconducting strip resonators. In this dissertation parametric devices with cm-scaled RF cavities and oscillators are considered. The approach is to show that the same underlying effects that exist in optical systems also exist in with microwave cavities, and with the development of high-Q superconducting RF cavities feasible threshold for parametric effects are obtainable.
Parametric devices have become a stepping stone in our development of modern technology and new scientific discoveries. They play a role in making astronomical observations with the use of parametric amplifiers as high-sensitivity low-noise first stage amplifiers, or in modern communications as amplifiers of optical frequency light. In addition, parametric devices have been successfully implemented in optomechanics to ''cool'' or ''heat'' mechanical motion. In fact, with such systems it has been possible to ``cool'' the motion of a mirror down to its quantum ground state, which is the lowest state of motion obtainable due to the quantum limit. The most common systems of the time consist of optical systems using optical cavities and fiber optics, or micro systems using planar superconducting strip resonators. In this dissertation parametric devices with cm-scaled RF cavities and oscillators are considered. The approach is to show that the same underlying effects that exist in optical systems also exist in with microwave cavities, and with the development of high-Q superconducting RF cavities feasible threshold for parametric effects are obtainable.
In the late 1960s and early 1970s, the development of mechanical resonators was pushed forward in efforts to record gravitational waves. In order to push down the limit of the smallest detectable force, the radiation circulating in a Fabry-Perot cavity was demonstrated to modify the damping of the cavity end-mirror suspended to act as a mechanical resonator. A few years later, motivated by the study of the internal properties of atoms and ions, the radiation pressure of light was realized as a means to cool atomic motion. In the following years, the ground-state cooling of ion motion was achieved in landmark studies. For mechanical resonators parametrically coupled to Fabry-Perot cavities, it took much longer to reach quantum ground-state cooling, both in the microwave domain, where the original experiments took place, and in the optical domain. Ground-state cooling in both regimes was reached by three groups during the preparation of this thesis and was largely due to advancements in the fabrication methods. \n \nGround-state cooling allows, in principle, the quantum nature of mechanical resonators to be probed and harnessed. Microwave domain devices, which are focused on in this thesis, have the advantage that nonlinear elements (superconducting quantum bits, qubits) are readily available. These elements enable nonclassical state preparation of the qubit and the subsequent transfer to the microwave cavity. The goal is to transfer these quantum states to mechanical resonators. This would allow mechanics to be used as a quantum mechanical memory in quantum information processing thanks to their long lifetimes. \n \nIn this thesis, various aspects of microwave domain circuit optomechanics are studied. The main goal of this thesis is to study how to enhance the coupling between a quantum regime microwave device and a mechanical resonator by using Josephson junction –based qubits. Coherent interaction between a superconducting qubit and a classical driven mechanical field is demonstrated. The analysis presented in this thesis predicts that ground-state cooling and coherent state transfer is possible in the single-phonon regime with transmon-regime qubits. Also, traditional linear optomechanical systems are considered in which the mechanical resonator is coupled to an electrical resonator. Such systems exhibit a rich spectrum of phenomena from which the quantum-limited amplification and multimode effects are considered in this thesis. It is shown that the system operates near quantum-limited amplification, which could be reached if the mechanical resonator was in the ground state.
Superconducting radio frequency (SRF) cavities present a unique opportunity in their potential for extremely large quality factors (Q) which allow for low-loss microwave systems which extend photon lifetimes. They have subsequently been used and improved upon as individual cells of particle accelerators where large accelerating voltages are required. More recently, they have been used as double SRF cavity systems for coupling electromagnetic fields via qubits inserted into the cavity bodies. Capitalizing on this Q enhancement, we propose an SRF cavity system for parametric amplification of these microwave fields from vacuum. This triple SRF cavity consists of a pump cavity with a silicon nitride (SiN) membrane acting as one end-wall and two signal/idler cavities that are separated by an iris plane. Parametric amplification occurs when some parameter of the system varies sinusoidally in time and this subsequently drives the system into oscillation. Here, we vary the length of the cavities by driving the SiN membrane end-wall into motion using the radiation pressure from the pump cavity. Sufficient energy transfer between cavities will allow amplification and subsequent oscillation of the vacuum fields. We will introduce and explain theoretical background, SRF cavity fabrication and testing, SiN membrane mechanics, and lastly double cavity mechanics. We will identify which facets of the project seem feasible at this time.
An exciting scientific goal, common to many fields of research, is the development of ever-larger physical systems operating in the quantum regime. Relevant to this dissertation is the objective of preparing and observing a mechanical object in its motional quantum ground state. In order to sense the object's zero-point motion, the probe itself must have quantum-limited sensitivity. Cavity optomechanics, the interactions between light and a mechanical object inside an optical cavity, provides an elegant means to achieve the quantum regime. In this dissertation, I provide context to the successful cavity-based optical detection of the quantum-ground-state motion of atoms-based mechanical elements; mechanical elements, consisting of the collective center-of-mass (CM) motion of ultracold atomic ensembles and prepared inside a high-finesse Fabry-P'erot cavity, were dispersively probed with an average intracavity photon number as small as 0.1. I first show that cavity optomechanics emerges from the theory of cavity quantum electrodynamics when one takes into account the CM motion of one or many atoms within the cavity, and provide a simple theoretical framework to model optomechanical interactions. I then outline details regarding the apparatus and the experimental methods employed, highlighting certain fundamental aspects of optical detection along the way. Finally, I describe background information, both theoretical and experimental, to two published results on quantum cavity optomechanics that form the backbone of this dissertation. The first publication shows the observation of zero-point collective motion of several thousand atoms and quantum-limited measurement backaction on that observed motion. The second publication demonstrates that an array of near-ground-state collective atomic oscillators can be simultaneously prepared and probed, and that the motional state of one oscillator can be selectively addressed while preserving the near-zero-point motion of neighboring oscillators.
Microscale and nanoscale mechanical resonators have been used in advanced technological applications, from high precision time keeping and mass sensing, to processing high frequency signals in mobile communications. In the last few decades, they have been an important part of progress in the field of quantum information and metrology and have been proposed as quantum memories or transducers for measuring or connecting different types of quantum systems. The field of cavity optomechanics and electromechanics is concerned with coupling the electromagnetic field of a resonant optical cavity or electrical circuit to mechanical motion. These systems provide potential means to control and engineer the state of a mechanical object at the quantum level. This thesis contains the description of mechanical systems in megahertz to a few hundred megahertz frequency range formed by nano-fabricating photonic, phononic, and electrical circuits on a chip. These structures are designed to provide a large radiation pressure coupling between mechanical motion and electromagnetic fields to address and manipulate motional degrees of freedom. Qualitatively novel quantum effects are expected when one takes a step beyond linear coupling and exploits higher order interactions. To that end, we integrate electrical, mechanical and photonic structures in a multimode photonic crystal structure to observe "x2-coupling", where the optical cavity frequency is coupled to the square of the mechanical displacement. Moreover, we have developed two integrated on-chip platforms based on Si3N4 and Si nanomembranes capable of interfacing superconducting qubits and optical photons and realizing reversible microwave-to-optical conversion. We employ radiation pressure to cool these mechanical resonators to their quantum ground state. Finally, we demonstrate a form of electromechanical crystal for coupling microwave photons and hypersonic phonons of frequency ωm/2π = 0.425 GHz by capacitively coupling a phononic crystal acoustic cavity to a superconducting microwave resonator. Moving to higher frequency acoustic cavities not only facilitates the integration of electromechanical circuits and nanophotonic systems capable of operation in the resolved sideband limit of optomechanics for noise-free quantum signal conversion, but it opens up the possibility of using phonons as information carriers via phononic circuits. Utilizing a two-photon resonance condition for efficient microwave pumping and phononic bandgap shield to eliminate acoustic radiation, we achieve large cooperative electromechanical coupling (C ≈ 30) and intrinsic decay time of 2.3 ms. Moreover, electrical read-out of the phonon occupancy shows that the acoustic mode thermalizes close to its quantum ground-state of motion (phonon occupancy nm=1.5) at a fridge temperature of Tf = 10 mK. We conclude by considering several designs and fabrication improvements to the hypersonic electromechanical crystals that would enable them to perform quantum conversion between the electrical and acoustic domain.
In this dissertation, I theoretically investigate the open system dynamics of cavity optomechanical systems in the quantum limit, where a mechanical resonator couples to a cavity mode via radiation pressure force. Recent developments in nano-fabrication and cooling techniques make it possible to optically control and manipulate the motion of micro- and nano-mechanical resonator. Several experiments have demonstrated the possibility of preparing macroscopic mechanical resonators into their quantum ground state, which makes optomechanical systems an ideal candidate for studying the quantum behavior of macroscopic objects. One important direction in quantum optomechanics is the study of the decoherence of optomechanical system due to the interaction with their external environments. This dissertation explores the decoherence effects by considering the influence of the radiation pressure coupling on the interaction between optomechanical system and its environments. Because the effects of the nonlinear interaction vary with the optomechanical coupling strength, three different interaction regimes are fully studied here: the weak coupling, the intermediate coupling and the strong coupling.
Harmonic oscillators might be one of the most fundamental entities described by physics. Yet they stay relevant in recent research. The topological properties associated with exceptional points that can occur when two modes interact have generated much interest in recent years. Harmonic oscillators are also at the heart of new quantum technological applications: the long lifetime of high-Q resonators make them advantageous as quantum memories, and they are employed for narrowband processing of quantum signals, as in Josephson parametric amplifiers. The goal of this thesis is to explore different fundamental regimes of two coupled harmonic oscillators using cavity optomechanics as the experimen- tal platform. With consistent progress in attaining ever increasing Q factors, mechanical and electromagnetic resonators realize near-ideal harmonic oscillators. By parametrically modulating the nonlinear optomechanical interaction between them, an effective linear coupling is achieved, which is tunable in strength and in the relative frequencies of the two modes. Thus cavity optomechanics provides a framework with excellent control over system parameters for the study of two coupled harmonic modes. The specific optomechanical implementation employed are superconducting circuits with the vibrating top plate of a capacitor as the mechanical element. Multimode optomechanical circuits are realized, with two microwave modes interacting with one or two mechanical oscillators. The supplementary modes serve either as intermediaries in the relation of the two modes of interest, or as auxiliaries used to control a parameter of the system. Three main experimental results are achieved. First, an auxiliary microwave mode allows the engineering of the effective dissipation rate of a mechanical oscillator. The latter then acts as a reservoir for the main microwave mode with which it interacts. The microwave mode susceptibility can be tuned, resulting in an instability akin to that of a maser and in resonant amplification of incoming microwave signals with an added noise close to the quantum minimum. Second, we study the conditions for a nonreciprocal interaction between two microwave modes, when the information flows in one direction but not in the other. The two modes interact through two mechanical oscillators, leading to frequency conversion between the two cavities. Dissipation in the mechanical modes is essential to the scheme in two ways: it provides a reciprocal phase necessary for the interference and eliminates the unwanted signals. Third, level attraction between a microwave and a mechanical mode is demonstrated, where the eigenfrequencies of the system are drawn closer as the result of interaction, rather distancing themselves as in the more usual case of level repulsion. The phenomenon is theoretically connected to exceptional points, and a general classification of the possible regimes of interaction between two harmonic modes is exposed, including level repulsion and attraction as special cases.