Technical digest - International Electron Devices Meeting/Technical digest
CMOS Cryo-Electronics for Quantum Computing
Jan Craninckx, Anton Potočnik, Bertrand Parvais, Alexander Grill, N. Subramanian, Steven Van Winckel, S. Brebels, Massimo Mongillo, Ruoyu Li, B. Govoreanu, Iuliana P. Radu
To scale up quantum computers to large number of qubits, there is a need to bring the classical interface electronics closer to the qubits operating at milli-Kelvin temperature. This has sparked a recent revival in cryo electronics research. This paper presents a short overview of recent state of the art, shows how nanoscale CMOS transistor properties are conveniently well suited for this task when properly modeled, and discusses a 4K superconducting dispersive readout circuit and a mK RF multiplexer as two examples.
To scale up quantum computers to large number of qubits, there is a need to bring the classical interface electronics closer to the qubits operating at milli-Kelvin temperature. This has sparked a recent revival in cryo electronics research. This paper presents a short overview of recent state of the art, shows how nanoscale CMOS transistor properties are conveniently well suited for this task when properly modeled, and discusses a 4K superconducting dispersive readout circuit and a mK RF multiplexer as two examples.
The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits can be implemented in many flavors, but they are fragile, and their state has a tendency to decay in time. To be usable for computation, qubits must be corrected in real time by a classical controller. The controller must also see that desired computations are executed. Today, the control of qubits is performed at room temperature (RT) by racks of instruments, while the qubits operate at several tens of milli-Kelvin. To ensure compactness and, eventually, scalability, we have proposed and implemented CMOS circuits designed to operate at a few degrees Kelvin. This makes complex thermalization circuits unnecessary, potentially enabling superconductive interconnects, which would enable virtually zero resistance and low thermal conductivity. Cryogenic CMOS, or cryo-CMOS, technology was chosen to achieve classical control due to its scalable nature and overall miniaturization opportunities. Cryo-CMOS circuits and systems need to be carefully designed to ensure strict power budgets, while achieving quite advanced specifications in terms of noise and bandwidth. We review the requirements of a classical controller and cryo-CMOS circuits and systems developed for spin qubits in our lab. Results and perspectives are presented with a discussion about a road map for the future.
Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.
Quantum computers hold the promise to solve some of the most complex problems of today. The core of a quantum computer is a quantum processor, which is composed of quantum bits (qubits). Qubits are fragile and their state needs to be corrected in real time by a classical controller. Today, the control of qubits is done at room temperature by racks of instruments, while qubits operate at several tens of milli-Kelvin. To ensure compactness, and eventually scalability, we have proposed the use of controllers operating at a few Kelvin, so as to reduce the length of control cables, while potentially enabling superconductive interconnects, which enable virtually zero resistance and low thermal conductivity. We have chosen CMOS to achieve this functionality due to its scalable nature and overall miniaturization opportunities. Cryogenic CMOS, or cryo-CMOS, circuits and systems need to be carefully designed, so as to ensure low noise and high bandwidth, while operating at strict power budgets of a few milliwatts per qubit. In this paper, we outline the requirements of a classical controller and we show examples of such circuits and systems. Results and perspectives are presented discussing a roadmap for the future.
Quantum computing holds the potential to solve problems beyond the capabilities of classical computers. However, realizing practical large-scale quantum computers faces critical challenges, including the key bottleneck in wiring quantum processors operating at cryogenic temperatures to their room temperature control electronics. This article explores cryo-CMOS ICs as an enabling technology to circumvent such a wiring bottleneck. After reviewing the basics of quantum computing and the behavior of CMOS devices at cryogenic temperatures, the requirements for the interface electronics for superconducting and semiconductor qubits are discussed, and state-of-the-art cryo-CMOS circuit solutions are briefly described, including a few hints to other qubit platforms. Finally, the article concludes with an overview of future challenges to be addressed to realize the vision of cryo-CMOS technology as an enabler of large-scale quantum computers with practical applications.
Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.
A fault-tolerant quantum computer with millions of quantum bits (qubits) requires massive yet very precise control electronics for the manipulation and readout of individual qubits. CMOS operating at cryogenic temperatures down to 4 K (cryo-CMOS) allows for closer system integration, thus promising a scalable solution to enable future quantum computers. In this paper, a cryogenic control system is proposed, along with the required specifications, for the interface of the classical electronics with the quantum processor. To prove the advantages of such a system, the functionality of key circuit blocks is experimentally demonstrated. The characteristic properties of cryo-CMOS are exploited to design a noise-canceling low-noise amplifier for spin-qubit RF-reflectometry readout and a class-F2,3digitally controlled oscillator required to manipulate the state of qubits.