Recently, there has been growing interest in the miniaturization and integration of atomic-based quantum technologies. In addition to the obvious advantages brought by such integration in facilitating mass production, reducing the footprint, and reducing the cost, the flexibility offered by on-chip integration enables the development of new concepts and capabilities. In particular, recent advanced techniques based on computer-assisted optimization algorithms enable the development of newly engineered photonic structures with unconventional functionalities. Taking this concept further, we hereby demonstrate the design, fabrication, and experimental characterization of an integrated nanophotonic-atomic chip magnetometer based on alkali vapor with a micrometer-scale spatial resolution and a magnetic sensitivity of 700 pT/√Hz. The presented platform paves the way for future applications using integrated photonic-atomic chips, including high-spatial-resolution magnetometry, near-field vectorial imaging, magnetically induced switching, and optical isolation.
Recently, there has been growing interest in the miniaturization and integration of atomic-based quantum technologies. In addition to the obvious advantages brought by such integration in facilitating mass production, reducing the footprint, and reducing the cost, the flexibility offered by on-chip integration enables the development of new concepts and capabilities. In particular, recent advanced techniques based on computer-assisted optimization algorithms enable the development of newly engineered photonic structures with unconventional functionalities. Taking this concept further, we hereby demonstrate the design, fabrication, and experimental characterization of an integrated nanophotonic-atomic chip magnetometer based on alkali vapor with a micrometer-scale spatial resolution and a magnetic sensitivity of 700 pT/√Hz. The presented platform paves the way for future applications using integrated photonic-atomic chips, including high-spatial-resolution magnetometry, near-field vectorial imaging, magnetically induced switching, and optical isolation.
Abstract Optical magnetometers based on alkali vapors, such as rubidium, are among the most sensitive technologies for detecting and characterizing magnetic fields. Following the recent effort in miniaturizing atomic-based quantum technologies, the last years were marked by a growing interest in developing integrated quantum nanophotonic circuits for a vast range of applications. Motivated by the attractiveness of such chip-scale integration, we present and experimentally demonstrate an integrated magnetic sensing platform, based on a nanophotonic-chip interfaced to a microfabricated alkali vapor cell. Magnetically induced circular dichroism in rubidium vapor is measured using a planar structure that spatially resolves the handedness of incoming photons depending on their spin. The presented approach paves the way toward further integration of highly sensitive magnetometers, with potential for future applications, such as in high-spatial resolution magnetic vectorial imaging.
Quantum sensing is an ever-evolving research field describing the use of a quantum phenomenon to perform measurement of a physical quantity. Amongst different types of quantum sensors, atomic vapor-based quantum effects are extensively used to measure quantities such as time, velocity, acceleration, electric, and magnetic fields. Here, we propose and demonstrate remote quantum sensing using a chip-scale atomic vapor cell. Specifically, we remotely interrogate millimeter-scale micromachined vapor cells, and measure the ambient Earth’s magnetic field at a standoff distance of ∼10 m and a sensitivity of ∼1 pT/√Hz. We further spatially map different magnetic fields in the presence of a noisy ambient environment. Simultaneously we are able measure the distance between a micro-cell and the interrogating system by means of time-of-flight measurements, thus correlating between position and magnetic field. Utilizing micromachined vapor cells for remote magnetometry offers substantial advantages in scalability, planar photonic integration, cost, and size. Consequently, we provide a novel toolset to deploy, measure, and map arbitrary, remote, and hard-to-access magnetic fields in unshielded environments with high sensitivity and spatial resolution, paving the way to a variety of novel applications in diverse fields such as medicine, communication, defense, space-exploration, and quantum technologies.
Quantum sensors based on the nitrogen-vacancy (NV) center in diamond are leading platforms for high-sensitivity magnetometry with nanometer-scale resolution. State-of-the-art implementations, however, typically rely on bulky free-space optics or sacrifice spatial resolution to achieve high sensitivities. Here, we realize an integrated platform that overcomes this trade-off by fabricating monolithic whispering-gallery-mode cavities from a diamond chip containing a high density of NV centers and by evanescently coupling excitation to and photoluminescence from the cavity using a tapered optical fiber. Employing a lock-in-amplified Ramsey magnetometry scheme, we achieve a photon-shot-noise-limited DC sensitivity of 58nT/Hz---the best sensitivity reported to date for a nanofabricated cavity-based magnetometer. The microscopic cavity size enables micrometer-scale spatial resolution and low-power operation, while fiber-coupling provides a path to scalable on-chip integration. Arrays of such sensors could enable NV-NMR spectroscopy of sub-nanoliter samples, new magnetic-gradient imaging architectures, and compact biosensing platforms.
A monolithically integrated 3D atomic chip for weak magnetic field detection is presented in this work. A 14.8 ohm MEMS thin film non-magnetic micro heater is monolithically integrated onto a micro spherical alkali vapor cell to realize on-chip atomic density control. Both magnetic and thermal characteristics of the non-magnetic heater are analyzed theoretically. Based on the heater-integrated atomic chip, a chip-scale scalar atomic magnetometer is realized and tested in a magnetic shield. Effect of heating noise suppression methods including high frequency heating, noise-shifting heating and high precision feedback control on magnetometer performance is experimentally analyzed. By further analyzing and eliminating glitch noise in output signal, magnetic noise floor of the constructed device reduced by over 88 %. The proposed atomic chip is especially advantageous for future low-cost and high integration quantum optical magnetometry. [2023-0152]
Emerging atomic magnetometers (AMs) are among the most advanced sensors for detecting and characterizing magnetic fields. Recently, there has been growing interest in the miniaturization and integration of AMs due to the urgent demand for portability and compactness in various fields such as biomagnetism imaging. While conventional AMs require a bulky setup of optical devices for the pumping and optical readout of atomic spin, here, a novel chip-scale single-beam AM scheme is proposed by leveraging extreme transmissive circular polarization dichroism (TCPD) and geometric phase manipulation of spin-selective interference meta-optics. This is achieved through silicon-based metasurfaces that enable the realization of arbitrary-to-circular polarization conversion and wavefront modulation within a monolithic chip at Rb D1 transition wavelength (λ = 795 nm). Two spin-selective interference metasurfaces, i.e., meta-circular-polarizer (MCP) and meta-circular-polarizer-lens (MCPL), are fabricated and characterized, with a measured TCPD of 0.68 for the MCP as well as focusing efficiency and TCPD of around 70.67% and 0.69 for the MCPL, respectively. As a proof of concept, a 4 × 4 × 4 mm 3 Rb vapor cell is combined with our metasurface to construct a miniaturized single-beam AM. The sensitivity of our compact metasurface-based system is about 15 fT/Hz 1/2, with a dynamic range near zero-field of ± 2.2 nT. We envision that this work could facilitate the development of burgeoning chip-scale quantum sensors, which hold great potential for high-spatial-resolution biomagnetic imaging, on-chip nuclear magnetic resonance, and so forth.
The interaction between light and vapors in the presence of magnetic fields is fundamental to many quantum technologies and applications. Recently, the ability to geometrically confine atoms into periodic structures has enabled the creation of chip-scale, micromachined hybrid atomic-diffractive optical elements. However, applying magnetic fields to such structures remains largely unexplored, offering potential for both fundamental and applied insights. Here, we present measurements of an atomic-diffractive optical element subject to magnetic fields. In contrast to the well-known polarization rotation in a Faraday medium, these diffractive atomic elements exhibit additional, rapidly oscillating rotation terms, which we validate both theoretically and experimentally. Moreover, we find that the introduction of spatially varying magnetic fields leads to a reduction in fringe visibility, which can be leveraged for gradiometric applications. Together, these effects establish a chip-scale platform where diffraction and quantum sensing are inseparably co-engineered, unveiling previously inaccessible regimes of atom–photon–magnetic interaction. By probing the magneto-optic response of periodically confined vapors, our results lay the groundwork for integrated smart-cell magnetometers and open new avenues for flat-optics-enabled quantum photonic devices.