Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Gain and Noise Spectra for YBa 2 Cu 3 O 7 Hot-Electron Bolometer Mixers

Chao-Te Li, Gerhard S. Schoenthal, Bascom S. Deaver, Robert M. Weikle, Mark Lee, Rajesh A. Rao, Chang‐Beom Eom

Published Mar 1, 1999• 0 citations
OpenAlex

Related papers

YBa 2 Cu 3 O 7-δ Hot-Electron Bolometer Mixer at 0.6 THz

Serguei Cherednichenko, Fredrik Rönnung, Gregory N Gol'tsman +2 more

We present an investigation of hot-electron bolometric mixer based on a YBa 2Cu 3O 7-δ (YBCO) superconducting thin film. Mixer conversion loss of –46 dB, absorbed local oscillator power and intermediate frequency bandwidth were measured at the local oscillator frequency 0.6 THz. The fabrication technique for nanoscale YBCO hot-electron bolometer (HEB) mixer integrated with a planar antenna structure is described.

•May 1, 2000•1 citation

YBa2Cu3O7−δ hot-electron bolometer mixer

Serguei Cherednichenko, Fredrik Rönnung, Gregory N Gol'tsman +2 more

Physica C Superconductivity•Nov 1, 2000•3 citations

Fabrication of high-T/sub c/ hot-electron bolometric mixers for terahertz applications

Michael J. Burns, Alan W. Kleinsasser, K. A. Delin +4 more

Superconducting hot-electron bolometers (HEB) represent a promising candidate for heterodyne mixing at frequencies exceeding 1 THz. Nb HEB mixers offer performance competitive with tunnel junctions without the frequency limit imposed by the superconducting energy gap. Although the performance of YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// HEB mixers is not projected to be superior to that of Nb devices, which operate at low temperatures, they introduce the possibility of sensitive, low power heterodyne detectors operating at temperatures approaching 90 K for applications requiring portability and closed-cycle refrigeration. We report on the fabrication and characterization, both DC and RF, of high-T/sub c/ mixers based on ultra-thin (/spl les/20 nm) YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// films patterned to micrometer dimensions and incorporated into 2.5 THz planar mixer circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•11 citations

Study of Mid-infrared Superconducting Hot Electron Bolometer Mixers

Akira Kawakami, Hisashi Shimakage, Junsei Horikawa +4 more

IEICE Technical Report; IEICE Tech. Rep.•Jan 12, 2017•0 citations

Low-noise and wideband hot-electron superconductive mixers for THz frequencies

Boris S. Karasik, Anders J. Skalare, Rolf A. Wyss +5 more

Superconductive hot-electron bolometer (HEB) mixers have been built and tested in the frequency range 1.1-2.5 THz. The mixer device is a 0.15-03 /spl mu/m microbridge made from a 10 nm thick Nb film. This device employs diffusion as a cooling mechanism for hot electrons. The double sideband noise temperature was measured to be /spl les/3000 K at 2.5 THz and the mixer IF bandwidth is /spl ap/9-10 GHz for a 0.1 /spl mu/m long device. The local oscillator (LO) power dissipated in the HEB microbridge was 20-100 nW. Further improvement of the mixer characteristics can be potentially achieved by using Al microbridges. The advantages and parameters of such devices are evaluated The HEB mixer Is a primary candidate for ground based, airborne and spaceborne heterodyne instruments at THz frequencies. HEB receivers are planned for use on the NASA Stratospheric Observatory for Infrared Astronomy (SOFIA) and the ESA Far Infrared and Submillimeter Space Telescope (FIRST). The prospects of a submicron-size YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// (YBCO) HEB are also discussed. The expected LO power of 1-10 /spl mu/W and SSB noise temperature of /spl ap/2000 K may make this mixer attractive for various remote sensing applications.

IEEE International Conference on Terahertz Electronics (THz)•Nov 27, 2002•5 citations

IF properties of YBCO hot-electron bolometer mixers for millimeter-wave radiation

Takashi Uchida, Yoshizumi Yasuoka, Katsumi Suzuki

Physica C Superconductivity•Aug 1, 2002•3 citations
Superconducting hot-electron bolometers (HEB) represent a promising candidate for heterodyne mixing at frequencies exceeding 1 THz. Nb HEB mixers offer performance competitive with tunnel junctions without the frequency limit imposed by the superconducting energy gap. Although the performance of YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// HEB mixers is not projected to be superior to that of Nb devices, which operate at low temperatures, they introduce the possibility of sensitive, low power heterodyne detectors operating at temperatures approaching 90 K for applications requiring portability and closed-cycle refrigeration. We report on the fabrication and characterization, both DC and RF, of high-T/sub c/ mixers based on ultra-thin (/spl les/20 nm) YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// films patterned to micrometer dimensions and incorporated into 2.5 THz planar mixer circuits.
Superconductive hot-electron bolometer (HEB) mixers have been built and tested in the frequency range 1.1-2.5 THz. The mixer device is a 0.15-03 /spl mu/m microbridge made from a 10 nm thick Nb film. This device employs diffusion as a cooling mechanism for hot electrons. The double sideband noise temperature was measured to be /spl les/3000 K at 2.5 THz and the mixer IF bandwidth is /spl ap/9-10 GHz for a 0.1 /spl mu/m long device. The local oscillator (LO) power dissipated in the HEB microbridge was 20-100 nW. Further improvement of the mixer characteristics can be potentially achieved by using Al microbridges. The advantages and parameters of such devices are evaluated The HEB mixer Is a primary candidate for ground based, airborne and spaceborne heterodyne instruments at THz frequencies. HEB receivers are planned for use on the NASA Stratospheric Observatory for Infrared Astronomy (SOFIA) and the ESA Far Infrared and Submillimeter Space Telescope (FIRST). The prospects of a submicron-size YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// (YBCO) HEB are also discussed. The expected LO power of 1-10 /spl mu/W and SSB noise temperature of /spl ap/2000 K may make this mixer attractive for various remote sensing applications.