The development of single photon detectors (SPD's) in the microwave regime is a fundamental challenge for obtaining a better understanding of the phenomena and components employed in quantum information technologies. Particularly, the field of quantum thermodynamics has until now been mainly theory oriented due to the lack of suitable detectors. In this thesis I present the first steps in developing a high fidelity SPD suitable for detecting itinerant microwave photons in a transmission line.
The device is of mesoscopic size and directly integrable into superconducting quantum circuits. Out of the two main approaches in microwave SPD's, atom-like systems and thermal detectors, we pursue the latter. In a thermal detector, the energy of the photon is transferred into the absorber of the detector, causing an abrupt increase in its temperature. This leads to the destruction of the photon, which can be avoided with an atom-like detector. However, an advantage of the thermal approach is that a broadband microwave detector, operated in a continuous manner, can be realized. This is essential for several experiments for example in quantum thermodynamics.
The absorber of our micro calorimeter is a normal metal nanowire. The electron gas in the wire is used for the photon absorption, whereas the phonons work as a heat sink. The absorber is connected to a superconducting electrode via a thin tunnel barrier and grounded through a direct normal metal-superconductor contact, which acts as a heat mirror. The temperature of the electron gas is probed via the differential conductance of a tunnel-junction. For realising a sensitive SPD, it is essential to minimize the heat capacity of the absorber. Thermal properties of small metal structures can deviate significantly from the properties of bulk materials due to the large surface-to-volume ratio. We have measured thermal relaxation in Cu and Ag thin-film nanowires at sub-kelvin temperatures and observed an anomalously long relaxation time in the Cu wires. In addition to a large specific heat, these results may also originate from the slow thermalisation in the granular structure observed in the evaporated Cu wires.; Saavuttaaksemme paremman ymmarryksen kvantti-informaatioteknologiassa hyodynnettavista ilmioista ja komponenteista, on yksittaisten fotonien resoluutiolla toimivien mikroaaltofotoni-ilmaisinten kehittaminen olennainen haaste. Sopivien havaintolaitteiden puutteen vuoksi on erityisesti kvanttitermodynamiikka pysynyt vahvasti teoriaan keskittyneena alana.
Tassa vaitoskirjassa esitetaan ensimmaiset askeleet herkan, yksittaisia siirtolinjassa kiertavia mikroaaltofotoneja havaitsevan anturin kehittamisessa. Laite on kooltaan mesoskooppinen, ja se voidaan kytkea suprajohtaviin piireihin. Termiset detektorit - joita kehitamme tassa tyossa - ja atomin kaltaiset systeemit ovat yleisimmin kaytettyja, toisiaan taydentavia ilmaisimia. Termisessa anturissa havaitun fotonin energia siirtyy laitteen absorbaattoriin, aiheuttaen siina nopean, havaittavan suuruisen lampotilan nousun.…
The development of single photon detectors (SPD's) in the microwave regime is a fundamental challenge for obtaining a better understanding of the phenomena and components employed in quantum information technologies. Particularly, the field of quantum thermodynamics has until now been mainly theory oriented due to the lack of suitable detectors. In this thesis I present the first steps in developing a high fidelity SPD suitable for detecting itinerant microwave photons in a transmission line.
The device is of mesoscopic size and directly integrable into superconducting quantum circuits. Out of the two main approaches in microwave SPD's, atom-like systems and thermal detectors, we pursue the latter. In a thermal detector, the energy of the photon is transferred into the absorber of the detector, causing an abrupt increase in its temperature. This leads to the destruction of the photon, which can be avoided with an atom-like detector. However, an advantage of the thermal approach is that a broadband microwave detector, operated in a continuous manner, can be realized. This is essential for several experiments for example in quantum thermodynamics.
The absorber of our micro calorimeter is a normal metal nanowire. The electron gas in the wire is used for the photon absorption, whereas the phonons work as a heat sink. The absorber is connected to a superconducting electrode via a thin tunnel barrier and grounded through a direct normal metal-superconductor contact, which acts as a heat mirror. The temperature of the electron gas is probed via the differential conductance of a tunnel-junction. For realising a sensitive SPD, it is essential to minimize the heat capacity of the absorber. Thermal properties of small metal structures can deviate significantly from the properties of bulk materials due to the large surface-to-volume ratio. We have measured thermal relaxation in Cu and Ag thin-film nanowires at sub-kelvin temperatures and observed an anomalously long relaxation time in the Cu wires. In addition to a large specific heat, these results may also originate from the slow thermalisation in the granular structure observed in the evaporated Cu wires.; Saavuttaaksemme paremman ymmarryksen kvantti-informaatioteknologiassa hyodynnettavista ilmioista ja komponenteista, on yksittaisten fotonien resoluutiolla toimivien mikroaaltofotoni-ilmaisinten kehittaminen olennainen haaste. Sopivien havaintolaitteiden puutteen vuoksi on erityisesti kvanttitermodynamiikka pysynyt vahvasti teoriaan keskittyneena alana.
Tassa vaitoskirjassa esitetaan ensimmaiset askeleet herkan, yksittaisia siirtolinjassa kiertavia mikroaaltofotoneja havaitsevan anturin kehittamisessa. Laite on kooltaan mesoskooppinen, ja se voidaan kytkea suprajohtaviin piireihin. Termiset detektorit - joita kehitamme tassa tyossa - ja atomin kaltaiset systeemit ovat yleisimmin kaytettyja, toisiaan taydentavia ilmaisimia. Termisessa anturissa havaitun fotonin energia siirtyy laitteen absorbaattoriin, aiheuttaen siina nopean, havaittavan suuruisen lampotilan nousun.…
This dissertation focuses on the development of a new type of thermal microwave photodetector based on superconductor–normal-metal–superconductor (SNS) junctions.
We motivate the development of the detector mainly by microwave quantum optics applications in the context of superconducting qubits coupled to microwave transmission lines and resonators, i.e., in the context of circuit quantum electrodynamics (cQED). In cQED, single-photon microwave pulses naturally arise as a results of a qubit exchanging its excitation with a transmission line. While immense progress has been achieved in cQED in general, and in linear microwave amplification in particular, the challenge of developing an efficient and practical detector for single itinerant photons remains open, mostly due to the exceedingly small energy of individual microwave photons. This prevents microwave implementations of a certain class of quantum optical protocols, including the parity measurement protocol proposed in this dissertation.
The core of this dissertation is dedicated to introducing our detector design, discussing the thermal properties of the detector in detail, and demonstrating the operation of the detector in a time-gated threshold detection mode. In particular, we demonstrate threshold detection of coherent 8.4 GHz microwave pulses containing roughly 200 photons, or 1.1 zJ of energy. Compared to other thermal detectors, this is an order of magnitude improvement in the energy of the detected pulses.
In addition, we characterize the linear response of the SNS junctions as separate components. That is, we embed the junctions in a microwave circuit that is specifically designed to allow determining the electrical admittance of the SNS junctions from the response of the circuit as a whole.; Tama vaitoskirja keskittyy uudentyyppisen mikroaaltofotoni-ilmaisimen kehitykseen. Ilmaisin perustuu suprajohde–normaalimetalli–suprajohde-liitoksiin (SNS).
Ilmaisin on suunnattu lahinna mikroaaltotaajuuksilla tapahtuviin kvanttioptiikan sovellutuksiin, joissa suprajohtavat kvanttibitit (eli kubitit) kytketaan mikroaaltosiirtolinjoihin. Tallaisissa niin sanotuissa piirikvanttisahkodynamiikan kokeissa yhden fotonin mikroaaltopulsseja syntyy luonnollisesti virittyneen kubitin luovuttaessa energiansa mikroaaltosiirtolinjaan. Yhden fotonin liikkuvia mikroaaltopulsseja ei kuitenkaan kyeta havaitsemaan tehokkaasti nykyaan kaytossa olevalla tekniikalla, lahinna yksittaisten mikroaaltofotonien haviavan pienen energian vuoksi. Tama siitakin huolimatta, etta lineaariset vahvistimet, joita useimmiten kaytetaan mikroaaltomittauksissa, ovat kehittyneet viime vuosina vahvasti. Ilman yksifotoni-ilmaisia eraita kvanttioptiikan menetelmia ei voida kuitenkaan hyodyntaa, mukaan lukien pariteettimittausmenetelma, jota ehdotetaan tassa vaitoskirjassa.
Vaitoskirjan keskeisimmassa osassa esitetaan ilmaisimen toimintaperiaate ja tarkeimmat termodynaamiset ominaisuudet seka tutkitaan kuinka heikkoja mikroaaltopulsseja ilmaisin kykenee havaitsemaan. Jos pulssin…
Circuit quantum electrodynamics offers versatile opportunities for various discoveries infundamental physics, as well as for different applications such as sensitive detectors and,ultimately, even a large-scale quantum computer. Since these devices work at cryogenictemperatures and excess heat is a substantial source of errors, it is of great importance to controlthe heat.
In this thesis, several techniques for heat control are experimentally investigated. We study heattransfer carried by photons between two heat baths, as well as heat flow between superconductingresonators and their environment. In particular, the focus is on using normal-metal componentsto enhance the operation of superconducting microwave circuits operating at the level of singleenergy quanta.
First, we investigate long-distance single-channel heat conduction near the quantum limit, i.e.,the quantum of thermal conductance. As compared to earlier experiments, the distance is increasedby a factor of 10,000. In addition, we demonstrate emission and absorption of photons in amicrowave resonator by photon-assisted tunneling in normal-metal–insulator–superconductorjunctions. Another approach for absorbing photons is to use a normal-metal resistor in asuperconducting resonator with a tunable resonance frequency. Finally, we realize a circuitconsisting of two resonators with a singularity in the parameter space, known as an exceptionalpoint. In our circuit, the exceptional point enables the fastest possible heat transfer between thetwo resonators without back and forth oscillation.
In the future, these methods may find applications in different cryogenic devices, including a fastinitialization of qubits. Furthermore, the methods may be utilized in the experimental studies offundamental physics, including further investigations of exceptional points in differentconfigurations.; Piirikvanttisahkodynamiikka tarjoaa monipuolisia mahdollisuuksia seka monenlaisilleperusfysiikkaan liittyville havainnoille etta erilaisille sovelluksille, kuten herkille ilmaisimille jalopulta jopa suuren mittakaavan kvanttitietokoneelle. Lammonsaately on erityisen tarkeaa, sillatallaiset laitteet toimivat erittain matalissa lampotiloissa ja ylimaarainen lampo aiheuttaamerkittavissa maarin toimintavirheita.
Vaitoskirjassa tutkitaan kokeellisesti useita menetelmia lammonsaatelyyn. Tutkimuskohteena onsateilyhiukkasten eli fotonien lammonkuljetus kahden lampokylvyn valilla seka suprajohtavienvarahtelijoiden lammonsiirto ymparistonsa kanssa. Erityisesti tutkitaan normaalimetallistavalmistettujen osien kayttoa suprajohtavissa mikroaaltopiireissa, jotka toimivat yksittaistenenergiakvanttien tasolla ja joiden toimintaa normaalimetalliosilla pyritaan parantamaan.
Aluksi vaitoskirjassa tutkitaan pitkilla etaisyyksilla yksittaista kanavaa pitkin tapahtuvaalammonsiirtoa kvanttimekaniikan maaraamalla rajalla, joka on ns. lammonjohtavuuskvantti.Aikaisempiin tutkimuksiin verrattuna etaisyytta on kasvatettu tekijalla 10 000. Lisaksivaitoskirjassa osoitetaan fotonien kaappaus eli…
This dissertation focuses on the development of a new type of thermal microwave photodetector based on superconductor–normal-metal–superconductor (SNS) junctions. We motivate the development of the detector mainly by microwave quantum optics applications in the context of superconducting qubits coupled to microwave transmission lines and resonators, i.e., in the context of circuit quantum electrodynamics (cQED). In cQED, single-photon microwave pulses naturally arise as a results of a qubit exchanging its excitation with a transmission line. While immense progress has been achieved in cQED in general, and in linear microwave amplification in particular, the challenge of developing an efficient and practical detector for single itinerant photons remains open, mostly due to the exceedingly small energy of individual microwave photons. This prevents microwave implementations of a certain class of quantum optical protocols, including the parity measurement protocol proposed in this dissertation. The core of this dissertation is dedicated to introducing our detector design, discussing the thermal properties of the detector in detail, and demonstrating the operation of the detector in a time-gated threshold detection mode. In particular, we demonstrate threshold detection of coherent 8.4 GHz microwave pulses containing roughly 200 photons, or 1.1 zJ of energy. Compared to other thermal detectors, this is an order of magnitude improvement in the energy of the detected pulses. In addition, we characterize the linear response of the SNS junctions as separate components. That is, we embed the junctions in a microwave circuit that is specifically designed to allow determining the electrical admittance of the SNS junctions from the response of the circuit as a whole.
Superconducting circuits provide a controllable and versatile platform for studying quantum phenomena and advancing quantum technologies. Josephson junctions and resonators are the central circuit elements, as they enable the realization of macroscopic quantum systems—such as qubits—that can be conveniently controlled, probed, and integrated with non-superconducting components. The implementation of a thermal reservoir through the integration of a dissipative element, such as a normal-metal resistor, offers an experimental platform for investigating quantum thermodynamics, heat management in circuits, on-chip thermal detectors, and the realization of quantum thermal machines. In this thesis, we integrate a mesoscopic normal metal and its associated thermometers as an on-chip bolometer within circuit quantum electrodynamics devices for thermal detection and quantum thermodynamics experiments. The on-chip bolometer is utilized as a sensitive and broadband thermal spectrometer to characterize the properties of a superconducting resonator and to investigate its dominant loss channels. We demonstrate the capability of our thermal detector to resolve the resonator modes over a wide frequency range extending above 20 GHz. When two thermal baths are connected through a qubit–resonator system, a quantum heat valve can be realized. This device has been demonstrated using both transmon and flux qubits. Photonic heat transport between the two baths is controlled by tuning the qubit energy via an applied static magnetic field. To model these experiments, we propose an approach based on electromagnetic simulation and microwave circuit theory, restricted to the linear-response regime. Despite this limitation, the method successfully captures the experimental observations and provides a practical tool for analysing and designing circuits for future experiments. A periodically driven qubit coupled to two unequal resonators, each terminated by a heat reservoir, enables the realization of a quantum Otto refrigerator. The use of a transmon qubit for this purpose is limited by its weak anharmonicity. We therefore explore alternative platforms for the experimental implementation of a quantum refrigerator based on charge and flux qubits, which exhibit strong anharmonicity. As an important step, we perform experiments on a driven flux qubit galvanically coupled to a resonator that is, in turn, weakly capacitively coupled to a heat reservoir. We observe interference patterns in the heat current arising from driving-induced coherence. In particular, resonance peaks in the heat transferred to the bath appear at driving frequencies that are integer fractions of the resonator frequency. These quantum features are governed by the relative phase accumulated by the qubit states under driving.
Motivated by the recent development of fast and ultrasensitive thermometry in nanoscale systems, we investigate quantum calorimetric detection of individual heat pulses in the sub-meV energy range. We propose a hybrid superconducting injector-calorimeter setup, with the energy of injected pulses carried by tunneling electrons. It is shown that the superconductor constitutes a versatile injector, with tunable tunnel rates and energies. Treating all heat transfer events microscopically, we analyze the statistics of the calorimeter temperature fluctuations and derive conditions for an accurate measurement of the heat pulse energies. Our results pave the way for fundamental quantum thermodynamics experiments, including calorimetric detection of single microwave photons.
Superconducting microwave circuits are a ubiquitous and important tool for devices that exploit the phenomena of superconductivity and cryogenic temperatures as an environment for achieving the generation, manipulation, and detection of quantum states - required for the ongoing development of quantum technologies. In particular, superconducting circuits are a promising platform for the universal quantum computer, which will require an unprecedented density of quantum-coherent elements to perform large-scale quantum-enhanced calculations and simulations, using the framework of cavity quantum lectrodynamics.Dissipation and heat in these superconducting circuits is a key source of error and inefficiency, however the thermodynamics in this regime is poorly understood despite its increasing relevancy.This thesis describes the integration of superconducting resonators and artificial atoms derived from superconducting quantum circuits with ultra-sensitive bolometry, for looking at heat transport through superconducting circuits. We will describe the physics and operation of each of these elements, before combining and utilising them to perform heat transport measurements through a superconducting artificial atom coupled to two resonators, each terminated by a normal-metal mesoscopic resistor, with the resistor temperature measured and temperature gradients across the circuit induced by superconducting tunnel-probes. We will present tunable heat transport through this system, firstly when the resonators are symmetric, allowing us to observe the role of dissipation-limited coupling of the resonators to the artificial atom on the locality of the heat transport, then on an asymmetric system, demonstrating a directional rectification of the heat transport. Additionally, we will discuss how each element of the system can be individually characterised, in particular the quality factor of superconducting resonators in the highly-dissipative limit, by exploiting the superconducting transition to perform a background reference. It is suggested that this hybrid quantum system, and these initial experiments provide a promising platform in the emergent field of circuit quantum thermodynamics. We believe that the techniques and tools developed during this thesis present key steps towards the understanding of the thermodynamics of quantum circuits, towards the realisation of devices that can explore heat transport in the quantum limit, such as a quantum heat engine.