Chinese Physics B

Electron transfer properties of double quantum dot system in a fluctuating environment*

Lujing Jiang, Kang Lan, Zhenyu Lin, Yanhui Zhang

Published Dec 30, 2020• 1 citation

Abstract

Using the innovative method of the additional Bloch vector, the electron transfer properties of a double quantum dot (DQD) system measured by a quantum point contact (QPC) in a fluctuating environment are investigated. The results show that the environmental noises in transverse and longitudinal directions play different roles in the dynamical evolution of the open quantum systems. Considering the DQD with symmetric energy level, the Fano factor exhibits a slight peak with the increase of transverse noise amplitude σ T, which provides a basis for distinguishing dynamical phenomena caused by different directional fluctuation noises in symmetric DQD structures by studying the detector output. In the case of asymmetric DQD, the dependence of a detector current involving the level displacement is distinct when increasing the transverse noise damping coefficient τ T and the longitudinal noise damping coefficient τε respectively. Meanwhile, the transverse noise damping coefficient τ T could significantly reduce the Fano factor and enhance the stability of the quantum system compared with the longitudinal one. The Fano factors with stable values as the enhancement of noise amplitudes show different external influences from the detector measurement, and provide a numerical reference for adjusting the noise amplitudes in both transverse and longitudinal directions appropriately in a microscopic experimental process to offset the decoherence effect caused by the measurements. Finally, the research of average waiting time provides unique insights to the development of single electron transfer theory in the short-time limit.

DOI: 10.1088/1674-1056/abd759

Related papers

The electron transfer properties of an open double quantum dot based on a quantum point contact

Kang Lan, Qian Du, Lisha Kang +3 more

We theoretically study the electron transfer properties of a double quantum dot system in dissipative and pure dephasing environments based on a quantum dot contact detector. Theoretical results show that in the dissipative environment, the decoherence caused by the detector would increase the stable value of the average current and Fano factor as functions of time. Meanwhile, we find the existence of the quantum Zeno effect during the process of dynamical evolution. In the case of symmetric DQD, the relaxation caused by the dissipative environment would decrease the amplitude of the average current with time evolution and increase the value of the Fano factor in the long time limit. In the case of asymmetric DQD, the relaxation reduces the peak value of Fano factor over time. In the pure dephasing environment, we find that the frequent measurement would hinder the switch between different current channels during the cotunneling process. This results in a high value of Fano factor. In the case of symmetric DQD, increasing the pure dephasing rate would improve the value of Fano factor. In the case of asymmetric DQD, the dynamical evolution with time is not sensitive to the pure dephasing rate. In addition, it is indicated that the transfer probability of electron in the detector is only affected by the coupling between QPC and DQD. The environments have no effect on the transfer of a single electron in the detector. Our theoretical results provide theoretical references for experimental researchers to study the electron transport properties.

Acta Physica SinicaJan 1, 20202 citations

Dynamics of an open double quantum dot system via quantum measurement

Kang Lan, Qian Du, Lisha Kang +4 more

We study the dynamics of a double quantum dot (DQD) system interacting with a Gaussian white noise (GWN) environment which is measured by a quantum point contact (QPC) device. With both the transverse and longitudinal noise taken into account, we utilize an effective method by adding an additional Bloch vector to calculate the cumulant generating functions of the electron transfer in the QPC detector based on the full counting statistics. We study the average detector current, Fano factor, and average waiting time of the electron transfer in the presence of decoherence effects of the DQD system caused by both the QPC and the GWN environment. It indicates that the decoherence effects arising from the QPC and the GWN environment have obviously different influences on the electron transfer detected by the QPC device in both short-time and long-time limits. It is shown that the measurement process would localize the electron in a DQD in a short time and that the distribution of the average current and Fano factor versus level displacement in long-time limit are broadened due to the interaction between the system and GWN environment, which provides a reliable method to explore the dynamical behavior of an open quantum system and to extract the characteristics of the environment by analyzing the detector outcome. Our results provide theoretical support for studies of quantum measurement in a semiconductor device affected by a fluctuant environment.

Physical review. B./Physical review. BMay 4, 202016 citations

Quantum measurement of a double quantum dot coupled to two kinds of environment

Lisha Kang, Yanhui Zhang, Xiulan Xu +1 more

We theoretically study the quantum measurement of a double quantum dot coupled to environments by Bloch equations with an additional vector. Using a quantum point contact as a detector, we accurately calculate the current, the Fano factor, and the waiting time, respectively, to characterize the dynamical properties in two kinds of environments. In the dissipative case, the asymmetrical Fano factor is enhanced with the increase in deocoherence rates and suppressed as the growth of relaxation rates, and the super-Poissonian noise is mainly due to the effects of a dynamical channel blockade and quantum coherence. In the pure dephasing case, the symmetrical Fano factor is magnified, which can be attributed to the quantum Zeno effect. Moreover, we show that the distribution of the average waiting time exhibits good agreement with the variation tendency of the current. Our paper provides an effective method in handling quantum measurement.

Physical review. B./Physical review. BDec 12, 201717 citations

Geometric phase of an open double-quantum-dot system detected by a quantum point contact*

Qian Du, Kang Lan, Yanhui Zhang +1 more

We study theoretically the geometric phase of a double-quantum-dot (DQD) system measured by a quantum point contact (QPC) in the pure dephasing and dissipative environments, respectively. The results show that in these two environments, the coupling strength between the quantum dots has an enhanced impact on the geometric phase during a quasiperiod. This is due to the fact that the expansion of the width of the tunneling channel connecting the two quantum dots accelerates the oscillations of the electron between the quantum dots and makes the length of the evolution path longer. In addition, there is a notable near-zero region in the geometric phase because the stronger coupling between the system and the QPC freezes the electron in one quantum dot and the solid angle enclosed by the evolution path is approximately zero, which is associated with the quantum Zeno effect. For the pure dephasing environment, the geometric phase is suppressed as the dephasing rate increases which is caused only by the phase damping of the system. In the dissipative environment, the geometric phase is reduced with the increase of the relaxation rate which results from both the energy dissipation and phase damping of the system. Our results are helpful for using the geometric phase to construct the fault-tolerant quantum devices based on quantum dot systems in quantum information.

Chinese Physics BJan 9, 20204 citations

Quantum speed limit of the double quantum dot in pure dephasing environment under measurement

Zhenyu Lin, Tian Liu, Zong‐Liang Li +2 more

The quantum speed limit (QSL) of the double quantum dot (DQD) system has been theoretically investigated by adopting the detection of the quantum point contact (QPC) in the pure dephasing environment. The Mandelstam–Tamm (MT) type of the QSL bound which is based on the trace distance has been extended to the DQD system for calculating the shortest evolving time. The increase of decoherence rate can weaken the capacity for potential speedup (CPS) and delay the evolving process due to the frequently measurement localizing the electron in the DQD system. The system needs longer time to evolve to the target state as the enhancement of dephasing rate, because the strong interaction between pure dephasing environment and the DQD system could vary the oscillation of the electron. Increasing the dephasing rate can sharp the QSL bound, but the decoherence rate would weaken the former effect and vice versa. Moreover, the CPS would be raised by increasing the energy displacement, while the enhancement of the coupling strength between two quantum dots can diminish it. It is interesting that there has an inflection point, when the coupling strength is less than the value of the point, the increasing effect of the CPS from the energy displacement is dominant, otherwise the decreasing tendency of the CPS is determined by the coupling strength and suppress the action of the energy displacement if the coupling strength is greater than the point. Our results provide theoretical reference for studying the QSL time in a semiconductor device affected by numerous factors.

Chinese Physics BJan 17, 20223 citations

Noise suppression of transport through double quantum dots by feedback control

Jiahao Xu, Shikuan Wang, Jiawei Wu +4 more

A controllable low noise current lies at the heart of high-precision measurements in quantum transport and metrology. While the previous research dealt with the suppression of noise in transport through a tunneling junction or a single quantum dot (QD) device, the present work investigates noise inhibition of a double quantum dot (DQD) transport system based on closed-loop feedback control. The unique advantage of a DQD device is that bidirectional transport at low bias can be measured by a nearby quantum point contact. However, the continuous monitoring of the DQD states inevitably leads to a measurement-induced dephasing. To appropriately characterize its transport properties in the presence of feedback action, we here develop a numerical method dubbed auxiliary density matrix approach, motivated by the hierarchical expansion of the moment-generating function in the hierarchy equations of motion [J. Cerrillo et al., Phys. Rev. B 94, 214308 (2016)]. This generic method has no restriction on the system structure and parameters and is able to evaluate the feedback current cumulants to an arbitrary order. It is revealed that the feedback control of the tunnel coupling between the two dots is the most effective to suppress the noise under various tunnel coupling configurations. The influence of interdot Coulomb interaction, measurement-induced dephasing, and finite time delay on feedback is also analyzed in detail.

Physical review. B./Physical review. BMar 7, 202310 citations