During the course of quantum teleportation in amplitude damping channel, the quantum Bell entanglement state will suffer a de-coherence, which will lead to the quality decrease of quantum teleportation, or even communication failure. To overcome this influence, we propose a method to compensate for the de-coherence of Bell entanglement state. Based on the parameter estimation of the amplitude damping channel, the compensation is divided into two steps. The first step (called pre-compensation) is carried out before the occurrence of de-coherence; the second step (called match-compensation) is carried out after the quantum entanglement state has experienced the de-coherence in the amplitude damping channel. The former is done at the EPR source device, while the latter is done at the quantum user device. The parameters of pre-compensation and match-compensation are determined by the amplitude damping coefficient. The quantum teleportation is carried out after the entanglement compensation. We will give the theoretical derivation and performance analysis of this method. Compared with the method that has no compensation and the method that the compensation is only done after de-coherence, the method given in this paper has a higher quantum teleportation fidelity which is close to 1, when the compensation parameter is adjusted accurately. Our method shows an effective influence on the teleportation quality decrease due to the entanglement de-coherence.
During the course of quantum teleportation in amplitude damping channel, the quantum Bell entanglement state will suffer a de-coherence, which will lead to the quality decrease of quantum teleportation, or even communication failure. To overcome this influence, we propose a method to compensate for the de-coherence of Bell entanglement state. Based on the parameter estimation of the amplitude damping channel, the compensation is divided into two steps. The first step (called pre-compensation) is carried out before the occurrence of de-coherence; the second step (called match-compensation) is carried out after the quantum entanglement state has experienced the de-coherence in the amplitude damping channel. The former is done at the EPR source device, while the latter is done at the quantum user device. The parameters of pre-compensation and match-compensation are determined by the amplitude damping coefficient. The quantum teleportation is carried out after the entanglement compensation. We will give the theoretical derivation and performance analysis of this method. Compared with the method that has no compensation and the method that the compensation is only done after de-coherence, the method given in this paper has a higher quantum teleportation fidelity which is close to 1, when the compensation parameter is adjusted accurately. Our method shows an effective influence on the teleportation quality decrease due to the entanglement de-coherence.
In this paper, two conclusive bidirectional quantum teleportation (BQT) schemes in an amplitude damping channel are put forward. These schemes, respectively, exchange two arbitrary single-qubit states and two arbitrary single-qutrit states between two users, where both users act as senders and receivers. To achieve this, the detailed procedures for using entanglement compensation in an amplitude damped channel to share pure entangled quantum states between two users are first proposed. Then, using the pure entangled four-qubit (or four-qutrit) state shared between the users as a quantum channel, the secret quantum information of each user, i.e. the single-qubit state (or single-qutrit state), is teleported to the other user. This teleportation is designed in such a way that the information can be probabilistically reconstructed by introducing an auxiliary qubit (or qutrit) and executing proper unitary transformations by the receiver. The research results indicate that, whether in single-qubit or single-qutrit state BQT schemes, the success probability of the receiver restoring secret quantum information is determined only by the smaller absolute value of the coefficients characterizing the quantum channel. Additionally, regardless of the noise intensity in the amplitude damping channel, the fidelity of each quantum state transmitted in our BQT schemes can reach 1, which is unattainable in existing BQT schemes based on noisy environments.
Most existing quantum teleportation schemes do not consider the memory effect of noise, which is becoming increasingly serious in practical quantum communication. In this paper, we propose two quantum teleportation protocols for noisy memory channels: one based on pre-flipping (PF) and another incorporating pre-flipping with environment-assisted measurement (PF-EAM). In the PF protocol, a pre-flipping operation is applied to the entangled qubits before entanglement distribution to enhance robustness against noise. A recovery operator is then used to reverse the pre-flipping operation. In the PF-EAM protocol, environment-assisted measurement (EAM) is added to the entanglement distribution process, further improving teleportation fidelity. Since the pre-flipping operator in the two protocols is a fixed unitary operator, our protocols exclude additional parameters, which is unlike weak measurement (WM) schemes that rely on adjustable measurement strength. We derive the analytical expressions for the average fidelity and the success probability of our teleportation protocols. The results show that the pre-flipping operator in the PF protocol effectively enhances the average fidelity of quantum teleportation in a deterministic manner, while the fidelity of PF-EAM remains at constant 1, unaffected by the noise intensity in the channel. In addition, our PF-EAM achieves a higher success probability while maintaining the fidelity of 1 with respect to the existing unprotected teleportation protocol, protocol based on weak measurement and measurement reversal (WM-MR), and protocol based on quantum feed-forward control and environment-assisted measurement (QFFC-EAM) framework.
We consider two qubit teleportation via quantum channel affected by amplitude damping noise. Addressing the same problem, X. Hu, Y. Gu, Q. Gong and G. Guo [Phys. Rev. A 81, 054302, (2010)] recently showed that in presence of noise, subjecting more qubits in quantum channel to amplitude damping can increase the fidelity of teleportation protocol. However, in this paper, by making some adjustments on quantum channel, we obtain teleportation fidelity which is even higher than one in the case of X. Hu et al. Moreover, our strategy is simpler than quantum distillation and compared to using weak measurement, it is deterministic. Furthermore, explicit analysis of fidelity is provided, we show that in general, choosing appropriate quantum channel enhances the ability of teleportation better and negates the fact that more amplitude damping noise more quality.
In order to improve the anti-noise performance of quantum teleportation, this paper proposes a novel dynamic quantum anti-noise scheme based on the quantum teleportation which transmits single qubit state using Bell state. Considering that quantum noise only acts on the transmitted qubit, i.e., the entangled state that Alice and Bob share in advance is affected by the noise, thus affecting the final transmission result. In this paper, a method for dynamically adjusting the shared entangled state according to the noise environment is proposed. By calculating the maximum fidelity of the output state to determine the shared entangled state, which makes the quantum teleportation be affected by the noise as little as possible. This paper calculates the fidelity of teleportation under four kinds of channel noise (amplitude damping, phase damping, bit flip and depolarizing noise). The results show that the scheme has a suppression effect on phase damping, bit flip and depolarizing noise under certain conditions. When the noise intensity is larger, the optimized efficiency is better.
Quantum teleportation have a central role in quantum information science and allows transferring of an unknown quantum state through entanglement and classical communication. Unfortunately, the interaction with external and internal noise severely affects the quality of teleportation and poses limitations on practical applications of quantum communication networks. In this work, instead of conventional Bell teleportation, we introduce a Machine Learned adaptive protocol for optimizing multiple components of Quantum Teleportation in order to achieve higher fidelity in various noise environments. In order to demonstrate the performance of the proposed scheme, we study three different noise models, including bit-flip, amplitude damping, and depolarizing noise, both in case of single-qubit and two-qubit channels. As a result, we observe substantial improvement in the teleportation fidelity in comparison to the classical Bell-state teleportation protocol in certain noise conditions. Furthermore, the machine-learned protocol reveals a nontrivial strategy for compensation of decoherence and information losses. In addition, obtained results indicate the flexibility and reliability of the proposed framework for implementing various adaptive quantum communications while shedding light on possibilities of discovery of optimal quantum algorithms by means of automated approache
Quantum teleportation is a fundamental protocol in quantum information science, whose performance is conventionally evaluated under the assumption of ideal Bell-state measurements. In realistic implementations, however, joint measurements are often imperfect and can deviate from maximally entangled bases due to coherent errors in entangling operations. In this work, we analytically show how the entanglement of joint measurements determines teleportation performance, and we propose a strategy to overcome the limitations imposed by partially entangled joint measurements to recover the unit teleportation fidelity with a nonzero success probability. This is achieved by optimizing a reversing operation on the teleported state to compensate for the known coherent deformation of the Bell-state measurement. We then derive an exact equation revealing a quantitative relation between measurement entanglement, channel entanglement, and the success probability to realize the unit-fidelity two-qubit teleportation. We illustrate our results using elegant joint measurements and realistic coherent error models arising from imperfect entangling operations in quantum systems. Our work provides fundamental insight into the role of measurement entanglement in quantum teleportation and offers a practical framework for achieving faithful teleportation without requiring substantial modifications to existing hardware.