Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

Fast production of 87Rb Bose-Einstein condensates

陈良超 CHEN Liang-chao, Zengming Meng, Pengjun Wang

Published Jan 1, 2017• 4 citations
Publisher

Abstract

A rapid atomic beam of rubidium (87Rb) is produced by two-dimensional magneto-optical trap (2D MOT), and then trapped by three-dimensional magneto-optical trap (3D MOT) with high vacuum for further cooling. After a process of optical molasses cooling, atoms are reloaded into a magnetic trap, where radio frequency (RF) evaporation cooling is implemented. The precooled atoms in the magnetic trap are then transferred into a far detuning optical dipole trap, where Bose-Einstein condensate (BEC) appears by further evaporation cooling. The 3D MOT is loaded to its maximum within 25 s and then BEC is prepared in 16 s. Due to the linear intensity of magnetic trap, the frequency can be scanned fast in the RF evaporation cooling process. In our experiment, the frequency scans from 39 MHz to 15 MHz in 6 s and then scans to 2 MHz in 5 s. The number of atoms in 3D MOT is about 11010, and there are 5105 atoms in the BEC after a succession of cooling processes. To optimize the performances of 2D MOT, a special light path is constructed. And prisms with high reflectivity are used to reduce the imbalance between opposite propagating cooling +beams. Furthermore, quarter-wave plates are used to keep the polarization state of the cooling beam when reflected by prisms or mirrors. The atoms are cooled to a temperature about 15 K in the magnetic trap by RF evaporation. In such a low temperature, the loss of magnetic trap (Majorana loss) will prevent the atoms from reaching a high density, and the atoms cannot be cooled further. To reduce the loss rate of the magnetic trap, the far blue detuning light (532 nm, 18 W) is added to plug the zero point of the magnetic trap. In the optically plugged magnetic trap, atoms with high density are cooled down enough, which gives a good start for the loading of optical dipole trap.

DOI
10.7498/aps.66.083701

Related papers

High-performance experimental apparatus for large atom number 87Rb Bose-Einstein condensates

Jiho Noh, Sung Jong Park, Chang Yong Park +3 more

We describe our high-performance experimental apparatus for producing large atom number 87Rb Bose-Einstein condensates by using a double magneto-optical trap (MOT) system that consists of a two-dimensional MOT (2D MOT) and a three-dimensional MOT (3D MOT). As an atomic beam source for loading the 3D MOT, we use a unique 2D MOT system with two-color pushing beams, which increase the loading rate and the total number of atoms in the 3D MOT, compared to a pure 2D MOT by a factor of 20. After MOT compression and polarization gradient cooling, atoms are optically pumped into a magnetically trappable hyperfine state |F = 1, m F = −1〉 to be loaded into a quadrupole-Ioffe-configuration (QUIC) trap. We enhance this optical pumping process by up to 300% by using two laser beams. After rf evaporative cooling, a Bose-Einstein condensate (BEC) with more than 2 × 107 atoms is achieved.

Journal of the Korean Physical Society•Oct 1, 2012•4 citations

Quantum gas apparatus for Bose-Einstein condensation of 87Rb

Taras Hrushevskyi

In a Bose-Einstein Condensate (BEC), due to extremely low temperatures, wave functions of all particles in the system overlap and form a single macroscopic wavefunction. This brings quantum mechanical effects to the macroscopic scale and allows us to better understand known quantum mechanical laws and effects, as well as develop new ones. In addition to being of fundamental scientific interest, BEC can serve in practical applications, such as quantum metrology, atomic interferometry, and quantum information and communication. Here we describe our approach for producing BECs in 87Rb. To create atomic flux towards our science chamber, a 2-dimensional magneto-optical trap (2D-MOT) with push beam is used. The initial atomic cloud is formed in 15s by 3D-MOT and consists of 1e9 atoms at 500uK. After the MOT, atoms are cooled with optical molasses to 50uK and transferred to a quadrupole magnetic trap, where radio-frequency (RF) induced evaporation is performed, which lowers temperature to 10uK. After RF evaporation, the atomic cloud is transferred to a crossed beams optical dipole trap (ODT). During evaporation in the ODT, the temperature is reduced below the critical temperature Tc=286nK, where condensation starts, and eventually reaches 40nK. As a result, a quasi-pure BEC with 1e5 87Rb atoms is formed. The complete sequence from the MOT loading to the BEC formation takes about 30s. Observations of the inversion of the aspect ratio of the cloud during free expansion and a bimodal velocity distribution prove quantum degeneracy. Presented in this thesis are the necessary background for understanding the experimental steps, a description of the schemes and technical details of our setup, and a characterizations of all the experimental steps.

•Jan 1, 2017•0 citations

Optimization of Transfer of Cold Atoms From TwoDimensional Magneto Optical Trap to ThreeDimensional Magneto Optical Trap

Tirumalasetty Panduranga Mahesh, Nobuyuki Takei Supervisors Dr. Kenji Ohmori, Ayan Banerjee

This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.

•Apr 1, 2018•0 citations

Compact experimental apparatus for producing high-repetition-rate 87Rb Bose-Einstein condensation on an atom chip

Hoon Yu, Seung Jin Kim, Ye Lin Moon +2 more

We construct a compact experimental apparatus for producing high-repetition-rate ultra cold 87Rb atom based on an external atom chip. Initially, we produce an atomic flux from a 2D+ MOT (magneto-optical trap) in a nearly isolated 2D+ MOT chamber and improve the flux by adjusting the cooling beam detuning of the 2D+ MOT. The flux is trapped in the 3D MOT for 1.2 s and is further cooled by performing compressing the MOT for 20 ms and using polarization gradient cooling for 6.2 ms. After optical pumping into the 5S F = 2 (m F = 2) ground state, we transport atoms toward the chip surface by performing external Z coil trapping. At 1 mm below the chip surface, the external Z coil trap is completely switched to an atom chip trap by using a Z wire and a dimple wire on the chip with external bias fields. The transport and the switching take totally 520 ms. The number of atoms trapped on the atom chip is measured to be about 2 × 107. After the atoms has been compressed for 100 ms to increase trap frequencies, we perform RF evaporative cooling in the RF frequency range from 32 MHz to 6.82 MHz for 2.4 seconds. The final number of atoms in the atomic cloud after RF cooling is 1.2 × 105 atoms, and we are able to observe some Bose-Einstein condensation. The repetition rate for producing the condensation is 0.234 Hz. In this paper, we describe our experimental apparatus and processes.

Journal of the Korean Physical Society•Aug 1, 2013•5 citations

Production of Rubidium Bose—Einstein Condensate in an Optically Plugged Magnetic Quadrupole Trap

Dongfang Zhang, Tianyou Gao, Lingran Kong +2 more

We experimentally produce the rubidium Bose—Einstein condensate in an optically plugged magnetic quadrupole trap. A far blue-detuned focused laser beam with a wavelength of 532 nm is plugged in the center of the magnetic quadrupole trap to increase the number of trapped atoms and to suppress the heating. An rf evaporative cooling in the magneto-optical hybrid trap is applied to decrease the atom temperature into degeneracy. The atom number of the condensate is 1.2(0.4) × 10 5 and the temperature is below 100 nK. We also study characteristic behaviors of the condensate, such as phase space density, condensate fraction and anisotropic expansion.

arXiv:1605.07695•Chinese Physics Letters•Jul 1, 2016•1 citation

Fast production of rubidium Bose–Einstein condensate in a dimple trap

Dizhou Xie, Dongyue Wang, Wei Gou +2 more

We reported a simple scheme of producing Bose–Einstein condensate (BEC) in a dimple trap. Starting from a regular magneto-optical trap (MOT), we apply a temporal dark MOT to increase the atom density and directly load atoms into a crossed dipole trap. In order to make the trap frequency relatively high at the end of evaporation, a tight dimple is added. Such a scheme ensures relatively high trap volume for loading atoms and high trap frequency for evaporative cooling. The BEC phase transition is observed after 12 s evaporation. Furthermore, we demonstrated the manipulation of the hyperfine states with a Raman coupling, which is very useful for studying many-body physics via Ramsey or spin-echo spectroscopy.

Journal of the Optical Society of America B•Feb 2, 2018•17 citations
A rapid atomic beam of rubidium (87Rb) is produced by two-dimensional magneto-optical trap (2D MOT), and then trapped by three-dimensional magneto-optical trap (3D MOT) with high vacuum for further cooling. After a process of optical molasses cooling, atoms are reloaded into a magnetic trap, where radio frequency (RF) evaporation cooling is implemented. The precooled atoms in the magnetic trap are then transferred into a far detuning optical dipole trap, where Bose-Einstein condensate (BEC) appears by further evaporation cooling. The 3D MOT is loaded to its maximum within 25 s and then BEC is prepared in 16 s. Due to the linear intensity of magnetic trap, the frequency can be scanned fast in the RF evaporation cooling process. In our experiment, the frequency scans from 39 MHz to 15 MHz in 6 s and then scans to 2 MHz in 5 s. The number of atoms in 3D MOT is about 11010, and there are 5105 atoms in the BEC after a succession of cooling processes. To optimize the performances of 2D MOT, a special light path is constructed. And prisms with high reflectivity are used to reduce the imbalance between opposite propagating cooling +beams. Furthermore, quarter-wave plates are used to keep the polarization state of the cooling beam when reflected by prisms or mirrors. The atoms are cooled to a temperature about 15 K in the magnetic trap by RF evaporation. In such a low temperature, the loss of magnetic trap (Majorana loss) will prevent the atoms from reaching a high density, and the atoms cannot be cooled further. To reduce the loss rate of the magnetic trap, the far blue detuning light (532 nm, 18 W) is added to plug the zero point of the magnetic trap. In the optically plugged magnetic trap, atoms with high density are cooled down enough, which gives a good start for the loading of optical dipole trap.
We describe our high-performance experimental apparatus for producing large atom number 87Rb Bose-Einstein condensates by using a double magneto-optical trap (MOT) system that consists of a two-dimensional MOT (2D MOT) and a three-dimensional MOT (3D MOT). As an atomic beam source for loading the 3D MOT, we use a unique 2D MOT system with two-color pushing beams, which increase the loading rate and the total number of atoms in the 3D MOT, compared to a pure 2D MOT by a factor of 20. After MOT compression and polarization gradient cooling, atoms are optically pumped into a magnetically trappable hyperfine state |F = 1, m F = −1〉 to be loaded into a quadrupole-Ioffe-configuration (QUIC) trap. We enhance this optical pumping process by up to 300% by using two laser beams. After rf evaporative cooling, a Bose-Einstein condensate (BEC) with more than 2 × 107 atoms is achieved.
In a Bose-Einstein Condensate (BEC), due to extremely low temperatures, wave functions of all particles in the system overlap and form a single macroscopic wavefunction. This brings quantum mechanical effects to the macroscopic scale and allows us to better understand known quantum mechanical laws and effects, as well as develop new ones. In addition to being of fundamental scientific interest, BEC can serve in practical applications, such as quantum metrology, atomic interferometry, and quantum information and communication. Here we describe our approach for producing BECs in 87Rb. To create atomic flux towards our science chamber, a 2-dimensional magneto-optical trap (2D-MOT) with push beam is used. The initial atomic cloud is formed in 15s by 3D-MOT and consists of 1e9 atoms at 500uK. After the MOT, atoms are cooled with optical molasses to 50uK and transferred to a quadrupole magnetic trap, where radio-frequency (RF) induced evaporation is performed, which lowers temperature to 10uK. After RF evaporation, the atomic cloud is transferred to a crossed beams optical dipole trap (ODT). During evaporation in the ODT, the temperature is reduced below the critical temperature Tc=286nK, where condensation starts, and eventually reaches 40nK. As a result, a quasi-pure BEC with 1e5 87Rb atoms is formed. The complete sequence from the MOT loading to the BEC formation takes about 30s. Observations of the inversion of the aspect ratio of the cloud during free expansion and a bimodal velocity distribution prove quantum degeneracy. Presented in this thesis are the necessary background for understanding the experimental steps, a description of the schemes and technical details of our setup, and a characterizations of all the experimental steps.
This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.
We construct a compact experimental apparatus for producing high-repetition-rate ultra cold 87Rb atom based on an external atom chip. Initially, we produce an atomic flux from a 2D+ MOT (magneto-optical trap) in a nearly isolated 2D+ MOT chamber and improve the flux by adjusting the cooling beam detuning of the 2D+ MOT. The flux is trapped in the 3D MOT for 1.2 s and is further cooled by performing compressing the MOT for 20 ms and using polarization gradient cooling for 6.2 ms. After optical pumping into the 5S F = 2 (m F = 2) ground state, we transport atoms toward the chip surface by performing external Z coil trapping. At 1 mm below the chip surface, the external Z coil trap is completely switched to an atom chip trap by using a Z wire and a dimple wire on the chip with external bias fields. The transport and the switching take totally 520 ms. The number of atoms trapped on the atom chip is measured to be about 2 × 107. After the atoms has been compressed for 100 ms to increase trap frequencies, we perform RF evaporative cooling in the RF frequency range from 32 MHz to 6.82 MHz for 2.4 seconds. The final number of atoms in the atomic cloud after RF cooling is 1.2 × 105 atoms, and we are able to observe some Bose-Einstein condensation. The repetition rate for producing the condensation is 0.234 Hz. In this paper, we describe our experimental apparatus and processes.
We experimentally produce the rubidium Bose—Einstein condensate in an optically plugged magnetic quadrupole trap. A far blue-detuned focused laser beam with a wavelength of 532 nm is plugged in the center of the magnetic quadrupole trap to increase the number of trapped atoms and to suppress the heating. An rf evaporative cooling in the magneto-optical hybrid trap is applied to decrease the atom temperature into degeneracy. The atom number of the condensate is 1.2(0.4) × 10 5 and the temperature is below 100 nK. We also study characteristic behaviors of the condensate, such as phase space density, condensate fraction and anisotropic expansion.
We reported a simple scheme of producing Bose–Einstein condensate (BEC) in a dimple trap. Starting from a regular magneto-optical trap (MOT), we apply a temporal dark MOT to increase the atom density and directly load atoms into a crossed dipole trap. In order to make the trap frequency relatively high at the end of evaporation, a tight dimple is added. Such a scheme ensures relatively high trap volume for loading atoms and high trap frequency for evaporative cooling. The BEC phase transition is observed after 12 s evaporation. Furthermore, we demonstrated the manipulation of the hyperfine states with a Raman coupling, which is very useful for studying many-body physics via Ramsey or spin-echo spectroscopy.