The high potential quantum computer has promised to solve classically intractable problems. In practicability of such high scalable general purpose quantum computer, the foremost challenge is to protect fragile quantum state from inherent noise sources. In this regards, the most promising surface code has been used for continuous encoding and decoding of quantum information so as to achieve fault tolerance. Besides, each code has threshold level within which the said code can detect and correct the error. The fault-tolerant quantum logic is used to contain error rate below threshold which needs transversal quantum operators. On the other hands, due to much difference the Boolean logic is no more useful in quantum computing. However, the quantum computer has to perform both classical solvable as well as classically intractable problem. In this conjecture, we focus on fault tolerant quantum implementation of Priority Encoder Circuit using Clifford+T gate library which is an essential component information processor.
The high potential quantum computer has promised to solve classically intractable problems. In practicability of such high scalable general purpose quantum computer, the foremost challenge is to protect fragile quantum state from inherent noise sources. In this regards, the most promising surface code has been used for continuous encoding and decoding of quantum information so as to achieve fault tolerance. Besides, each code has threshold level within which the said code can detect and correct the error. The fault-tolerant quantum logic is used to contain error rate below threshold which needs transversal quantum operators. On the other hands, due to much difference the Boolean logic is no more useful in quantum computing. However, the quantum computer has to perform both classical solvable as well as classically intractable problem. In this conjecture, we focus on fault tolerant quantum implementation of Priority Encoder Circuit using Clifford+T gate library which is an essential component information processor.
Decoherence jeopardizes the entanglement of fragile quantum states, and is among the foremost challenges towards engineering scalable quantum computers. Realizing quantum circuit implementation with small qubit count and shallow circuit depth is necessary due to the linear scaling of decoherence rate with qubit count and circuit depth. Conversely, reasonable correction of small unitary errors can be achieved by using surface codes along with a transversal gate set to protect quantum information from decoherence. In this paper, we analyze and report the upper bound of non-Clifford phase-depth for different mapping schemes and synthesis approaches. We introduce a synthesis methodology based on lookup-table (LUT) networks, wherein the Boolean logic translates into fault-tolerant quantum logic using Clifford+ Z N group with zero ancillary cost. We also present fault-tolerant synthesis techniques for k -LUT network using additional ancillary lines with exponential phase-count and unit phase-depth.
Abstract Decoherence is the greatest obstacle to the physical realization of scalable quantum computer, jeopardises coherent superposition of the qubit, and makes qubit extremely fragile. Quantum Error Correction Code (QECC), and Fault‐tolerant quantum computation collectively could protect qubit and improve scalability. On the other hand, the conventional logic circuit is no more useful in quantum computing due to much difference from quantum logic. However, quantum computer has to perform classical tasks which can be addressed by translating to its equivalent quantum algorithm. Herein, zero‐garbage‐based reversible and fault‐tolerant quantum circuit for 1 : 2, and 2 : 4 Decoder with enable signal using Clifford + T ‐group are proposed. Further, the design approach to implement n : 2 n decoder on fault‐tolerant quantum logic in linear T − depth is extended. Besides, performance parameters likely T − count , T − depth , and garbage output have been evaluated for n : 2 n decoder.
Quantum computation promises to revolutionize information processing by exploiting superposition and entanglement, enabling applications such as quantum simulation, combinatorial optimization, and secure quantum communication. Beyond individual processors, the quantum internet aims to connect quantum nodes through entanglement distribution, enabling distributed computation. However, quantum states are fragile: environmental interactions, imperfect gate operations, and measurement errors can quickly degrade encoded information. Reliable quantum computation therefore requires carefully designed quantum error-correcting codes and fault-tolerant protocols. Unlike classical redundancy schemes, quantum error correction must preserve delicate phase relationships and relies on indirect error detection through syndrome extraction with ancillary qubits, enabling error identification without collapsing encoded states. Topological codes, in particular, emerged early as the preferred choice for many architectures due to their planar structure, local interactions, and natural support for fault-tolerant logical operations. Color codes, for instance, allow transversal implementation of all Clifford gates, whereas non-Clifford operations require magic-state injection. More recent constructions, including quantum low-density parity-check codes, offer higher encoding rates and reduced resource overhead, but require long-range qubit connectivity and more complex protocols. Despite experimental progress, several challenges remain. Many platforms exhibit biased noise, motivating codes that exploit channel asymmetry. Real-time decoding remains a critical bottleneck, as fault-tolerant computation requires low-latency processing of rapidly generated syndrome data. Fault-tolerant logical state initialization also remains resource-intensive and scales poorly with code distance. Addressing these challenges, this thesis develops a unified framework spanning theory and experiment. It provides precise performance analysis of quantum error-correcting codes in the low physical error-rate regime, introduces codes tailored to biased noise, develops fast low-complexity decoding algorithms for real-time operation, and presents modular and efficient protocols for fault-tolerant state preparation of CSS codes. The latter is demonstrated experimentally through the preparation of a logical zero state of the Golay code on the Quantinuum H2 trapped-ion quantum computer.
Quantum computers are far more error-prone than their classical counterparts. Therefore, to build a quantum computer capable of running large-scale quantum algorithms, we must use the techniques of quantum error correction to ensure that the computer produces the correct output even when its components are unreliable. However, the resource requirements of building such a fault-tolerant quantum computer are currently prohibitive. Here, we examine the utility of using three-dimensional (3D) surface codes in a fault-tolerant quantum computer. This family of topological error-correcting codes is a generalization of the well-known 2D surface code to three spatial dimensions. We show that certain 3D surface codes have a transversal logical non-Clifford gate. In a quantum computing architecture, a non-Clifford gate is required to achieve computational universality. Transversal gates do not entangle qubits in different codes, so they are naturally fault tolerant because they do not spread errors. Next, we consider the problem of decoding 3D surface codes. In a quantum error-correcting code, we cannot observe the qubits directly, so we measure parity-check operators to gain information about the state of the code. Decoding is the problem of estimating what error has occurred given a list of unsatisfied parity checks. We observe that 3D surface codes offer asymmetric protection against bit-flip and phase-flip errors, but in both cases, we find that a threshold error rate exists below which we can suppress logical errors by increasing the size of the code. We use our results about logical gates and decoding to propose two fault-tolerant quantum computing architectures that utilize 3D surface codes. Finally, we compare the resource requirements of our architectures with the requirements of leading quantum computing architectures based on topological codes. We find that one of our architectures may be competitive with the leading architectures, depending on the properties of the physical systems used to build the qubits.
Quantum computers promise to solve problems that are intractable for classical computers, but qubits are vulnerable to many sources of error, limiting the depth of the circuits that can be reliably executed on today's quantum hardware. Quantum error correction has been proposed as a solution to this problem, whereby quantum information is protected by encoding it into a quantum error-correcting code. But protecting quantum information is not enough, we must also process the information using logic gates that are robust to faults that occur during their execution. One method for processing information fault-tolerantly is to use quantum error-correcting codes that have logical gates with a tensor product structure (transversal gates), making them naturally fault-tolerant. Here, we test the performance of a code with such transversal gates, the [[8,3,2]] color code, using trapped-ion and superconducting hardware. We observe improved performance (compared to no encoding) for encoded circuits implementing non-Clifford gates, a class of gates that are essential for achieving universal quantum computing. In particular, we find improved performance for an encoded circuit implementing the controlled-controlled-Z gate, a key gate in Shor's algorithm. Our results illustrate the potential of using codes with transversal gates to implement nontrivial algorithms on near-term quantum hardware.
Nowadays, rapid advancement in quantum algorithm towards achieving so-called quantum supremacy, calls for the design of high scalable quantum circuit. Quantum computers are very sensitive towards noise. To suppress inherent noise, the fault tolerant quantum circuit becomes desirable feature which can be achieved by using quantum error correction code. Surface code is one of the promising error correction code that addresses this issue. The Clifford+T group is one universal gates set which is used with surface code. In VLSI, multiplier circuit has very crucial role in the design of digital computer and becomes a pivotal in the application of DSP. Here, we have implemented a high speed quantum multiplier circuit using Clifford+T. At the end of this work, we evaluated some cost parameters like T-depth associated with the performance of quantum circuit as shown in the result section.