CASCADE protocol is an error detection and correction (EDC) method proposed firstly for use in quantum key distribution (QKD) systems. It is used to detect and correct all the errors in keys transm...
CASCADE protocol is an error detection and correction (EDC) method proposed firstly for use in quantum key distribution (QKD) systems. It is used to detect and correct all the errors in keys transmitted over a noisy quantum channel. This is done by sending some redundant information about the key to receiver as usual. However, just as differently, this extra information is sent over another noiseless classical channel after the quantum transmission is completely finished. Briefly, all the errors in noisy quantum communication are detected and corrected by a later noiseless classical communication using CASCADE protocol. In QKD literature, this EDC process is also called as information reconciliation (IR) or secret key reconciliation (SKR). For an IR protocol in QKD, one of the main performance measures is efficiency which depends on the amount of redundant information sent to make EDC possible. Since this extra information is transmitted over public channels, everyone can get it easily. Because this can damage the secrecy of keys that must be kept secret from third parties, more efficient, that is revealing less information about keys, IR methods are needed. In this paper, we present more efficient implementations of CASCADE protocol, using some inherent information already available in the protocol, exactly known bits and already known parities. This information is used in error detection and correction steps of the protocol to decrease the redundancy in redundant information. Our experiments have shown that the resulting protocols have higher efficiency than both all the previous CASCADE versions and several other more recently proposed IR methods.
CASCADE protocol is an error detection and correction (EDC) method proposed firstly for use in quantum key distribution (QKD) systems. It is used to detect and correct all the errors in keys transmitted over a noisy quantum channel. This is done by sending some redundant information about the key to receiver as usual. However, just as differently, this extra information is sent over another noiseless classical channel after the quantum transmission is completely finished. Briefly, all the errors in noisy quantum communication are detected and corrected by a later noiseless classical communication using CASCADE protocol. In QKD literature, this EDC process is also called as information reconciliation (IR) or secret key reconciliation (SKR). For an IR protocol in QKD, one of the main performance measures is efficiency which depends on the amount of redundant information sent to make EDC possible. Since this extra information is transmitted over public channels, everyone can get it easily. Because this can damage the secrecy of keys that must be kept secret from third parties, more efficient, that is revealing less information about keys, IR methods are needed. In this paper, we present more efficient implementations of CASCADE protocol, using some inherent information already available in the protocol, exactly known bits and already known parities. This information is used in error detection and correction steps of the protocol to decrease the redundancy in redundant information. Our experiments have shown that the resulting protocols have higher efficiency than both all the previous CASCADE versions and several other more recently proposed IR methods.
Quantum key distribution (QKD) enables secure communication by using the principles of quantum mechanics. A critical stage in QKD protocols such as BB84 is information reconciliation, where the communicating parties correct errors in their sifted sequences without revealing extra information to a potential eavesdropper. The CASCADE protocol is a widely used interactive error-correction algorithm for this purpose. The classical CASCADE and its known modifications perform well under the assumption of uniformly distributed errors in the quantum channel. However, this assumption can break down in real conditions, where short-term noise bursts create clusters of errors. This paper proposes a modification of the CASCADE designed to improve its efficiency in channels with time-varying, non-uniform error distributions. The main idea is to identify and discard blocks with a relatively high concentration of errors during reconciliation, preventing inefficient correction attempts and reducing the number of communication rounds. Two new modifications based on existing CASCADE variants are presented. The proposed approach reduces the number of interactions, which is a critical performance metric for reconciliation protocols.
It is widely accepted in the quantum cryptography community that interactive information reconciliation protocols, such as cascade, are inefficient due to the communication overhead. Instead, non-interactive information reconciliation protocols based on i.e. LDPC codes or, more recently, polar codes have been proposed. In this work, we argue that interactive protocols should be taken into consideration in modern quantum key distribution systems. In particular, we demonstrate how to improve the performance of cascade by proper implementation and use. Our implementation of cascade reaches a throughput above 80 Mbps under realistic conditions. This is more than twice the throughput previously demonstrated in any information reconciliation protocol.
It is widely accepted in the quantum cryptography community that interactive information reconciliation protocols, such as cascade, are ineffcient due to the communication overhead. Instead, non-interactive information reconciliation protocols based on i.e. LDPC codes or, more recently, polar codes have been proposed. In this work, we argue that interactive protocols should be taken into consideration in modern quantum key distribution systems. In particular, we demonstrate how to improve the performance of cascade by proper implementation and use. Our implementation of cascade reaches a throughput above 80 Mbps under realistic conditions. This is more than four times the throughput previously demonstrated in any information reconciliation protocol.
Quantum key distribution (QKD) relies on quantum and classical procedures in order to achieve the growing of a secret random string -the key- known only to the two parties executing the protocol. Limited intrinsic efficiency of the protocol, imperfect devices and eavesdropping produce errors and information leakage from which the set of measured signals -the raw key- must be stripped in order to distill a final, information theoretically secure, key. The key distillation process is a classical one in which basis reconciliation, error correction and privacy amplification protocols are applied to the raw key. This cleaning process is known as information reconciliation and must be done in a fast and efficient way to avoid cramping the performance of the QKD system. Brassard and Salvail proposed a very simple and elegant protocol to reconcile keys in the secret-key agreement context, known as Cascade, that has become the de-facto standard for all QKD practical implementations. However, it is highly interactive, requiring many communications between the legitimate parties and its efficiency is not optimal, imposing an early limit to the maximum tolerable error rate. In this paper we describe a low-density parity-check reconciliation protocol that improves significantly on these problems. The protocol exhibits better efficiency and limits the number of uses of the communications channel. It is also able to adapt to different error rates while remaining efficient, thus reaching longer distances or higher secure key rate for a given QKD system.