Recent developments in quantum computers have been pushing up the number of qubits. However, the state-of-the-art Noisy Intermediate Scale Quantum (NISQ) computers still do not have enough qubits to accommodate the error correction circuit. Noise in quantum gates limits the reliability of quantum circuits. To characterize the noise effects, prior methods such as process tomography, gateset tomography and randomized benchmarking have been proposed. However, the challenge is that these methods do not scale well with the number of qubits. Noise models based on the understanding of underneath physics have also been proposed to study different kinds of noise in quantum computers. The difficulty is that there is no widely accepted noise model that incorporates all different kinds of errors. The realworld errors can be very complicated and it remains an active area of research to produce accurate noise models. In this paper, instead of using noise models to estimate the reliability, which is measured with success rates or inference strength, we treat the NISQ quantum computer as a black box. We use several quantum circuit characteristics such as the number of qubits, circuit depth, the number of CNOT gates, and the connection topology of the quantum computer as inputs to the black box and derive a reliability estimation model using (1) polynomial fitting and (2) a shallow neural network. We propose randomized benchmarks with random numbers of qubits and basic gates to generate a large data set for neural network training. We show that the estimated reliability from our black-box model outperforms the noise models from Qiskit. We also showcase that our black-box model can be used to guide quantum circuit optimization at compile time.
Recent developments in quantum computers have been pushing up the number of qubits. However, the state-of-the-art Noisy Intermediate Scale Quantum (NISQ) computers still do not have enough qubits to accommodate the error correction circuit. Noise in quantum gates limits the reliability of quantum circuits. To characterize the noise effects, prior methods such as process tomography, gateset tomography and randomized benchmarking have been proposed. However, the challenge is that these methods do not scale well with the number of qubits. Noise models based on the understanding of underneath physics have also been proposed to study different kinds of noise in quantum computers. The difficulty is that there is no widely accepted noise model that incorporates all different kinds of errors. The realworld errors can be very complicated and it remains an active area of research to produce accurate noise models. In this paper, instead of using noise models to estimate the reliability, which is measured with success rates or inference strength, we treat the NISQ quantum computer as a black box. We use several quantum circuit characteristics such as the number of qubits, circuit depth, the number of CNOT gates, and the connection topology of the quantum computer as inputs to the black box and derive a reliability estimation model using (1) polynomial fitting and (2) a shallow neural network. We propose randomized benchmarks with random numbers of qubits and basic gates to generate a large data set for neural network training. We show that the estimated reliability from our black-box model outperforms the noise models from Qiskit. We also showcase that our black-box model can be used to guide quantum circuit optimization at compile time.
The current advancement in quantum computers has been focusing on increasing the number of qubits and enhancing their fidelity. However, the available quantum devices, known as intermediate scale quantum (NISQ) computers, still suffer from different sources of noise that impact their reliability. Thus, practical noise modeling is of great importance in the development of quantum error mitigation approaches. In this article, we propose a machine learning (ML)-based scheme to predict the output fidelity of the quantum circuit executed on NISQ devices. We show the benefit of using graph neural network (GNN)-based models compared to traditional ML-based models in capturing the quantum circuit structure in addition to its gates’ features, which enable characterizing unpredicted quantum circuit errors. We use different metrics to measure the fidelity of the quantum circuit output. Our experimental results using different quantum algorithms executed on IBM Q Guadalupe quantum computer show the high prediction accuracy of our ML reliability models. Our results also show that our models can guide the single-qubit gate rescheduling to improve the output fidelity of the quantum circuit without the need for prior execution of dedicated calibration circuits.
In the noisy intermediate-scale quantum (NISQ) era, one of the key questions is how to deal with the high noise level existing in physical quantum bits (qubits). Quantum error correction is promising but requires an extensive number (e.g., over 1,000) of physical qubits to create one ”perfect” qubit, exceeding the capacity of the existing quantum computers. This paper aims to tackle the noise issue from another angle: instead of creating perfect qubits for general quantum algorithms, we investigate the potential to mitigate the noise issue for dedicate algorithms. Specifically, this paper targets quantum neural network (QNN), and proposes to learn the errors in the training phase, so that the identified QNN model can be resilient to noise. As a result, the implementation of QNN needs no or a small number of additional physical qubits, which is more realistic for the near-term quantum computers. To achieve this goal, an application-specific compiler is essential: on the one hand, the error cannot be learned if the mapping from logical qubits to physical qubits exists randomness; on the other hand, the compiler needs to be efficient so that the lengthy training procedure can be completed in a reasonable time. In this paper, we utilize the recent QNN framework, QuantumFlow, as a case study. Experimental results show that the proposed approach can optimize QNN models for different errors in qubits, achieving up to 28% accuracy improvement compared with the model obtained by the error-agnostic training.
In the noisy intermediate-scale quantum (NISQ) era, one of the key questions is how to deal with the high noise level existing in physical quantum bits (qubits). Quantum error correction is promising but requires an extensive number (e.g., over 1,000) of physical qubits to create one "perfect" qubit, exceeding the capacity of the existing quantum computers. This paper aims to tackle the noise issue from another angle: instead of creating perfect qubits for general quantum algorithms, we investigate the potential to mitigate the noise issue for dedicate algorithms. Specifically, this paper targets quantum neural network (QNN), and proposes to learn the errors in the training phase, so that the identified QNN model can be resilient to noise. As a result, the implementation of QNN needs no or a small number of additional physical qubits, which is more realistic for the near-term quantum computers. To achieve this goal, an application-specific compiler is essential: on the one hand, the error cannot be learned if the mapping from logical qubits to physical qubits exists randomness; on the other hand, the compiler needs to be efficient so that the lengthy training procedure can be completed in a reasonable time. In this paper, we utilize the recent QNN framework, QuantumFlow, as a case study. Experimental results show that the proposed approach can optimize QNN models for different errors in qubits, achieving up to 28% accuracy improvement compared with the model obtained by the error-agnostic training.
Abstract This practical guide presents methods for constructing noise models using the Qiskit Aer noise module within the IBM Q ecosystem. The objective is to simulate quantum circuits under realistic error conditions, enabling accurate emulation of noisy quantum processors. The guide demonstrates how to: Use the Qiskit Aer noise module to define custom noise models. Incorporate gate errors, readout errors, and decoherence effects into simulations. Apply noise channels (e.g., depolarizing, amplitude damping, phase damping). Attach noise models to quantum circuit simulations. Analyze how noise affects algorithm performance and output distributions. Building noise models is essential for studying the behavior of quantum algorithms in the NISQ (Noisy Intermediate-Scale Quantum) era. It allows researchers to evaluate algorithm robustness, optimize circuit depth, and test error mitigation strategies before execution on real IBM Quantum hardware. This approach provides a bridge between ideal theoretical circuits and physically realistic quantum devices, enhancing the reliability and applicability of quantum computing experiments.
Hybridizing machine learning (ML) with quantum computing has become an attractive strategy to increase computational power on Noisy Intermediate Scale Quantum (NISQ) devices. Although these can be potentially quantum advantage devices, their qubit numbers and noise are bounded and there are challenges when it comes to practical quantum circuit realization. This work concentrates on the creation of optimized quantum circuits via ML-based strategies, to enhance the performance of the circuits, to reduce the error rate and to accommodate the particular noise profile of the hardware of NISQ devices. The resulting suboptimal mappings with little or no consideration of noise and hardware topology in traditional quantum compilers can ruin the fidelity of quantum algorithm. Leveraging machine learning, and specifically reinforcement and supervised learning methods, our method learns to optimize compilation strategy for specific quantum hardware architecture. The paper proposes a framework that uses machine learning models to predict qubit mappings, gate decompositions, and transpilation paths that minimize gate depth and error accumulation. We also investigate transfer learning methods for propagating the learned compilation strategies to novel NISQ machines. Such methods are empirically validated on both simulated and real quantum hardware backends, providing evidence of circuit depth, execution time and error reductions. The results show that ML-assisted compilation can achieve better success probabilities for benchmark quantum algorithms like VQE and QAOA than conventional compilers. Furthermore, the work examines the interpretability of ML models providing hardware-aware optimization recommendations and understanding the noise patterns and methods of error correction. Our work highlights the key role of ML for transferring between theoretical quantum algorithms and their practical NISQ implementations. This integration boosts the immediate applicability of existing quantum devices and provides a basis for adaptive and scalable likelihood-based compilation for the era of fault-tolerant quantum computation. Our results motivate further investigation of hybrid classical-quantum workflows, in which ML iteratively improves compilation in accordance with changing hardware noise and capabilities. By improving quantum circuit compilation onNISQ computers, this work is taking steps toward the realization of quantum advantage in application scenarios such as optimization, cryptography, and quantum simulation without needing to wait for fully fault-tolerant large-scale quantum computers.
Quantum computing is a quickly growing field with great potential for future technology. Quantum computers in the current noisy intermediate-scale quantum (NISQ) era face two major limitations - qubit count and error vulnerability. Although quantum error correction (QEC) methods exist, they are not applicable to the current size of computers, requiring thousands of qubits, while current NISQ systems have hundreds at most. It is therefore imperative to improve the reliability of the circuits as much as possible to make them robust to the errors that will occur. One common approach is to adjust the compilation process of a circuit to create a final circuit with improved reliability. However, there are many decisions to be made when compiling that affect the final performance of the circuit, two of the most critical ones being the mapping of logical to physical qubits (the qubit allocation problem) and the movement of qubits to satisfy two-qubit gate adjacency requirements (the qubit routing problem). We focus on solving the qubit allocation problem and identifying initial layouts that reduce error. To identify these layouts, we combine reinforcement learning with a graph neural network (GNN)-based Q-network for analyzing both the connections and error rates of the graph-like backend of superconducting quantum computers to make mapping decisions, creating a Graph Neural Network Assisted Compilation (GNAQC) strategy. We provide both the circuit and the properties of the target backend as input to guide the decision-making process. We work with the IBM Qiskit API to compile and simulate our quantum circuits. We train the architecture using a set of four backends and six circuits and find that GNAQC generally outperforms pre-existing qubit allocation algorithms, increasing final relative output fidelity by roughly 12.7%.