Scientists estimate large-scale quantum computers will be publicly available within few decades. This will have a detrimental e ect on the security of our digital world, especially security of applications that depend on public-key cryptography. An e ort is going on to develop quantum resistant cryptographic protocols in anticipation of the arrival of quantum computers. As part of this process, it is important to deploy such quantum resistant cryptographic protocols in many di erent platforms, especially resource constrained devices. In this project we aim to provide an evaluation of the performance of post-quantum Key Encapsulation Mechanisms (KEM) and digital signatures integrated into Transport Layer Security (TLS) protocol and deployed in a resource constrained device. Speci cally, we will integrate post-quantum Saber, Kyber and Newhope KEM schemes together with Dilithium digital signature into the embedded TLS open source library, mbedtls. To perform this, the TLS handshake approach of the mbedtls library as well as certi cates and their parsing have been modi ed to be able to handle post-quantum algorithms. The performance of such implementation will be measured with the code deployment into Raspberry Pi 2 Model B, an embedded platform with an ARM Cortex-A7 processor. In our experiments, we found how the integrated post-quantum schemes have algorithm and handshake runtimes from one and up to two orders of magnitude faster than other classical cryptography elliptic curve KEM and signature schemes.
Scientists estimate large-scale quantum computers will be publicly available within few decades. This will have a detrimental e ect on the security of our digital world, especially security of applications that depend on public-key cryptography. An e ort is going on to develop quantum resistant cryptographic protocols in anticipation of the arrival of quantum computers. As part of this process, it is important to deploy such quantum resistant cryptographic protocols in many di erent platforms, especially resource constrained devices. In this project we aim to provide an evaluation of the performance of post-quantum Key Encapsulation Mechanisms (KEM) and digital signatures integrated into Transport Layer Security (TLS) protocol and deployed in a resource constrained device. Speci cally, we will integrate post-quantum Saber, Kyber and Newhope KEM schemes together with Dilithium digital signature into the embedded TLS open source library, mbedtls. To perform this, the TLS handshake approach of the mbedtls library as well as certi cates and their parsing have been modi ed to be able to handle post-quantum algorithms. The performance of such implementation will be measured with the code deployment into Raspberry Pi 2 Model B, an embedded platform with an ARM Cortex-A7 processor. In our experiments, we found how the integrated post-quantum schemes have algorithm and handshake runtimes from one and up to two orders of magnitude faster than other classical cryptography elliptic curve KEM and signature schemes.
The emergence of quantum computing presents a critical threat to classical cryptographic schemes such as Rivest-Shamir-Adleman (RSA) and Elliptic Curve Cryptography (ECC), which underpin protocols such as TLS 1.3. This study proposes and evaluates an optimized integration of the CRYSTALS-Kyber algorithm within the Transport Layer Security (TLS) 1.3 protocol for resource-constrained IoT devices. The objective is to achieve quantum-resistant security while maintaining practical performance on embedded hardware. Using the Open Quantum Safe library and OpenSSL, the implementation is bench marked on Raspberry Pi and ARM Cortex platforms under real-world constraints. Key findings demonstrate that Kyber512 achieves a favorable balance between performance and post-quantum security, with low handshake latency, peak memory usage under 22 KB, and energy consumption as low as 0.36 mJ per handshake. A hybrid implementation combining Kyber with Elliptic Curve Diffie-Hellman Ephemeral (ECDHE) ensures backward compatibility while enabling 128-256 bit quantum-safe security. Empirical validation confirms constanttime execution, side-channel resistance (p>0.05over 100 K traces), and robust operation under packet loss. These results establish CRYSTALS-Kyber as a viable candidate for postquantum secure communication in constrained IoT environments.
Recent progress in quantum computers severely endangers the security of widely used public-key cryptosystems and of all communication that relies on it. Thus, the US NIST is currently exploring new post-quantum cryptographic algorithms that are robust against quantum computers. Security is seen as one of the most critical issues of low-power IoT devices-even with pre-quantum public-key cryptography-since IoT devices have tight energy constraints, limited computational power and strict memory limitations. In this paper, we present, to the best of our knowledge, the first in-depth investigation of the application of potential post-quantum key encapsulation mechanisms (KEMs) and digital signature algorithms (DSAs) proposed in the related US NIST process to a state-of-the-art, TLS-based, low-power IoT infrastructure. We implemented these new KEMs and DSAs in such a representative infrastructure and measured their impact on energy consumption, latency and memory requirements during TLS handshakes on an IoT edge device. Based on our investigations, we gained the following new insights. First, we show that the main contributor to high TLS handshake latency is the higher bandwidth requirement of post-quantum primitives rather than the cryptographic computation itself. Second, we demonstrate that a smart combination of multiple DSAs yields the most energy-, latency- and memory-efficient public key infrastructures, in contrast to NIST's goal to standardize only one algorithm. Third, we show that code-based, isogeny-based and lattice-based algorithms can be implemented on a low-power IoT edge device based on an off-the-shelf Cortex M4 microcontroller while maintaining viable battery runtimes. This is contrary to much research that claims dedicated hardware accelerators are mandatory.
Post-quantum (PQ) cryptographic algorithms are currently being developed to be able to resist attacks by quantum computers. The practical use of these algorithms for securing networks will depend on their computational and communication efficiency. In particular, this is critical for the security of wireless communications within the context of consumer IoT devices that may have limited computational power and depend on a constrained wireless bandwidth. To this end, there is a need to evaluate the performance of widely used application layer security standards such as transport layer security (TLS) to understand the use of the existing PQ algorithms that are being evaluated by NIST as a replacement to the current cryptographic algorithms. This paper focuses on two widely used IoT standards Bluetooth Low Energy (BLE) and WiFi to find out the optimal performing PQ algorithm for their security when used in end-to-end connections over the Internet. By implementing the capability for IP over BLE and all options of TLS connection establishment, we developed a client-server IoT testbed to measure the efficiency of PQ key encapsulation mechanisms (KEMs) and PQ digital signature algorithms. The test results showed that Kyber512 is the ideal KEM while Falcon-512 and Dilithium2 are the best signatures for BLE and WiFi devices. Based on this outcome, we developed a mechanism for IoT devices with multiple communication interfaces, that dynamically chooses a PQ KEM algorithm based on the MAC layer protocol being used at the time.
The rapid advancement of quantum computing poses a significant threat to the security of classical public-key cryptographic systems, driving the need for the adoption of post-quantum cryptographic (PQC) solutions. Digital signatures are a fundamental security primitive in Internet of Things (IoT) systems, providing authentication, data integrity, and secure firmware update mechanisms. However, deploying PQC digital signature schemes on resource-constrained IoT devices remains a major challenge due to their limited computational power and memory capacity. This paper presents an experimental benchmarking study of post-quantum digital signature schemes on two widely used embedded platforms: the ESP32 and the Raspberry Pi 4. The evaluation is conducted under realistic operating conditions using Universal Asynchronous Receiver/Transmitter (UART) and Message Queuing Telemetry Transport (MQTT) communication protocols, with all measurements obtained from real hardware implementations. Our results reveal critical trade-offs among execution time, memory footprint, and security level, and offer practical insights to guide the selection of suitable PQC digital signature schemes for deployment in constrained IoT environments.
The rapid advancement of quantum computing poses a critical threat to classical cryptographic algorithms such as RSA and ECC, particularly in Internet of Things (IoT) devices, where secure communication is essential but often constrained by limited computational resources. This paper investigates the feasibility of deploying post-quantum cryptography (PQC) algorithms on resource-constrained devices. In particular, we implement three PQC algorithms - BIKE, CRYSTALS-Kyber, and HQC - on a lightweight IoT platform built with Raspberry Pi devices. Leveraging the Open Quantum Safe (liboqs) library in conjunction with mbedTLS, we develop quantumsecure key exchange protocols, and evaluate their performance in terms of computational overhead, memory usage, and energy consumption for quantum secure communication. Experimental results demonstrate that the integration of PQC algorithms on constrained hardware is practical, reinforcing the urgent need for quantum-resilient cryptographic frameworks in next-generation IoT devices. The implementation of this paper is available at https://iqsec-lab.github.io/PQC-IoT/.
The rapid advancement of quantum computing poses a critical threat to classical cryptographic algorithms such as RSA and ECC, particularly in Internet of Things (IoT) devices, where secure communication is essential but often constrained by limited computational resources. This paper investigates the feasibility of deploying post-quantum cryptography (PQC) algorithms on resource-constrained devices. In particular, we implement three PQC algorithms - BIKE, CRYSTALS-Kyber, and HQC - on a lightweight IoT platform built with Raspberry Pi devices. Leveraging the Open Quantum Safe (liboqs) library in conjunction with mbedTLS, we develop quantumsecure key exchange protocols, and evaluate their performance in terms of computational overhead, memory usage, and energy consumption for quantum secure communication. Experimental results demonstrate that the integration of PQC algorithms on constrained hardware is practical, reinforcing the urgent need for quantum-resilient cryptographic frameworks in next-generation IoT devices. The implementation of this paper is available at https://iqsec-lab.github.io/PQC-IoT/.