Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Reflection of a Particle from a Quantum Measurement

Jonathan Mackrory, Kurt A. Jacobs, D. Steck

Published Aug 17, 2016• 2 citations
OpenAlex

Abstract

Abstract. We present a generalization of continuous position measurements that accounts for a spatially inhomogeneous measurement strength. This describes many real measurement scenarios, in which the rate at which information is extracted about position has itself a spatial profile, and includes measurements that detect if a particle has crossed from one region into another. We show that such measurements can be described, in their averaged behavior, as stochastically fluctuating potentials of vanishing time average. Reasonable constraints restrict the form of the measurement to have degenerate outcomes, which tend to drive the system to spatial superposition states. We present the results of quantum-trajectory simulations for measurements with a step-function profile (a “which-way ” measurement) and a Gaussian profile. We find that the particle can coherently reflect from the measurement region in both cases, despite the stochastic nature of the measurement back-action. In addition, we explore the connection to the quantum Zeno effect, where we find that the reflection probability tends to unity as the measurement strength increases. Finally, we discuss two physical realizations of a spatially varying position measurement using atoms. ar X iv

Related papers

Continuous simultaneous measurement of position and momentum of a particle

Filip Gampel, Mariusz Gajda

We formulate a model of a quantum particle continuously monitored by detectors measuring simultaneously its position and momentum. We implement the postulate of wave-function collapse by assuming that upon detection the particle is found in one of the meters' states chosen as a discrete subset of coherent states. The dynamics, as observed by the meters, is thus a random sequence of jumps between coherent states. We generate such trajectories using the quantum Monte Carlo wave-function method. For sparsely distributed detectors, we use methods from renewal theory of stochastic processes to obtain some semianalytic results. In particular, the different regimes of dynamics of the free particle are identified and quantitatively discussed: from stroboscopic motion in the case of low interrogation frequency, to delayed dynamics reminiscent of the Zeno effect if monitoring is frequent. For a semicontinuous spatial distribution of meters the emergence of classical trajectories is shown. Their statistical properties are discussed and compared to other detection schemes in which the operation on the system due to measurement corresponds to ``spatial filtering'' of the wave function.

arXiv:2209.01612•Physical Review A•Jan 20, 2023•10 citations

Nonclassical time correlation functions in continuous quantum measurement

Adam Bednorz, Wolfgang Belzig, Abraham Nitzan

A continuous projective measurement of a quantum system often leads to a suppression of the dynamics, known as the Zeno effect. Alternatively, generalized nonprojective, so-called 'weak' measurements can be carried out. Such a measurement is parameterized by its strength parameter that can interpolate continuously between the ideal strong measurement with no dynamics—the strict Zeno effect, and a weak measurement characterized by almost free dynamics but blurry observations. Here we analyze the stochastic properties of this uncertainty component in the resulting observation trajectory. The observation uncertainty results from intrinsic quantum uncertainty, the effect of measurement on the system (backaction) and detector noise. It is convenient to separate the latter, system-independent contribution from the system-dependent uncertainty, and this paper shows how to accomplish this separation. The system-dependent uncertainty is found in terms of a quasi-probability, which, despite its weaker properties, is shown to satisfy a weak positivity condition. We discuss the basic properties of this quasi-probability with special emphasis on its time correlation functions as well as their relationship to the full correlation functions along the observation trajectory, and illustrate our general results with simple examples. We demonstrate a violation of classical macrorealism using the fourth-order time correlation functions with respect to the quasi-probability in the two-level system.

arXiv:1104.4126•New Journal of Physics•Jan 6, 2012•49 citations

Quantum Zeno effect appears in stages

Kyrylo Snizhko, Parveen Kumar, Alessandro Romito

In the quantum Zeno effect, quantum measurements can block the coherent oscillation of a two level system by freezing its state to one of the measurement eigenstates. The effect is conventionally controlled by the measurement frequency. Here we study the development of the Zeno regime as a function of the measurement strength for a continuous partial measurement. We show that the onset of the Zeno regime is marked by a cascade of transitions in the system dynamics as the measurement strength is increased. Some of these transitions are only apparent in the collective behavior of individual quantum trajectories and are invisible to the average dynamics. They include the appearance of a region of dynamically inaccessible states and of singularities in the steady-state probability distribution of states. These predicted dynamical features, which can be readily observed in current experiments, show the coexistence of fundamentally unpredictable quantum jumps with those continuously monitored and reverted in recent experiments.

•Sep 29, 2020•62 citations

Topics in Quantum Measurement and Quantum Noise

Kurt A. Jacobs

In this thesis we consider primarily the dynamics of quantum systems subjected to continuous observation. In the Schrödinger picture the evolution of a continuously monitored quantum system, referred to as a `quantum trajectory', may be described by a stochastic equation for the state vector. We present a method of deriving explicit evolution operators for linear quantum trajectories, and apply this to a number of physical examples of varying mathematical complexity. In the Heisenberg picture evolution resulting from continuous observation may be described by quantum Langevin equations. We use this method to examine the noise spectrum that results from a continuous observation of the position of a moving mirror, and examine the possibility of detecting the noise resulting from the quantum back-action of the measurement. In addition to the work on continuous measurement theory, we also consider the problem of reconstructing the state of a quantum system from a set of measurements. We present a scheme for determining the state of a single cavity mode from the photon statistics measured both before and after an interaction with one or two two-level atoms.

arXiv:quant-ph/9810015•Oct 5, 1998•5 citations

An overview of continuous quantum measurements and its implications

A-B A Mohamed, E K Jaradat, A. M. Alotaibi +1 more

Abstract Quantum measurement has always been thought of as a formal, sudden projection that changes the system state instantly. However, in real life, the process of measurement involves a physical interaction that takes time to gather the information. The paper discusses the continuous quantum measurement that challenges the traditional instant measurement idea with the detector’s accumulated data continuously uninterruptedly. The paper starts by laying down the basic mathematics, which gradually leads to the modern Stochastic master equations and quantum trajectories through generalized measurements positive operator-valued measures and quantum instruments. The crucial experimental setups like circuit QED, trapped ions, and optomechanics are delineated where these notions have been put into practice. The significant ramifications of ongoing observation are then discussed, starting with the fundamental Zeno effect, measurement backaction, and continuing through the active steering of quantum states and the emergence of measurement-induced phase transitions in many-body systems. One of the main ideas of the paper is the attribute of measurement as a powerful control method which enables real-time feedback, state stabilization, and continuous quantum error correction. Finally, the paper points out the open problems that remain in the areas of many-body systems’ scalability and the coupling of machine learning with real-time quantum control.

Laser Physics Letters•Jan 1, 2026•0 citations

Quantum Zeno effect in the spatial evolution of a single atom

Zheng-Yuan Zhang, Han-Chao Chen, Xin Liu +15 more

The quantum Zeno effect (QZE) reveals that frequent measurements can suppress quantum evolution; however, the impact of measurements on the real-space motion of a single atom remains insufficiently explored experimentally. In this work, we employ an optical trap as a measurement pulse and, by monitoring atomic loss, directly observe the QZE in the real-space motion of a single atom. We find that the action of measurement on the atom consists of a projective measurement followed by subsequent periodic unitary evolution, thereby providing an intuitive physical picture of measurement backaction across different timescales. We further investigate the effects of measurement frequency, strength, and spatial position, demonstrating that measurements pulse not only suppress the spatial spreading of the quantum state but also enable deterministic preparation of distinct motional states. Moreover, by dynamically controlling the trap position, we realize measurement-induced directional transport of a single atom, with a velocity exceeding the maximum allowed by the adiabatic condition. Overall, our results provide a direct experimental demonstration of the QZE in real space and establish a versatile framework for measurement-based control of atomic motion, opening new possibilities for motional-state engineering in cold-atom systems.

arXiv:2509.24438•Nature Communications•Jun 12, 2026•0 citations
Abstract. We present a generalization of continuous position measurements that accounts for a spatially inhomogeneous measurement strength. This describes many real measurement scenarios, in which the rate at which information is extracted about position has itself a spatial profile, and includes measurements that detect if a particle has crossed from one region into another. We show that such measurements can be described, in their averaged behavior, as stochastically fluctuating potentials of vanishing time average. Reasonable constraints restrict the form of the measurement to have degenerate outcomes, which tend to drive the system to spatial superposition states. We present the results of quantum-trajectory simulations for measurements with a step-function profile (a “which-way ” measurement) and a Gaussian profile. We find that the particle can coherently reflect from the measurement region in both cases, despite the stochastic nature of the measurement back-action. In addition, we explore the connection to the quantum Zeno effect, where we find that the reflection probability tends to unity as the measurement strength increases. Finally, we discuss two physical realizations of a spatially varying position measurement using atoms. ar X iv
We formulate a model of a quantum particle continuously monitored by detectors measuring simultaneously its position and momentum. We implement the postulate of wave-function collapse by assuming that upon detection the particle is found in one of the meters' states chosen as a discrete subset of coherent states. The dynamics, as observed by the meters, is thus a random sequence of jumps between coherent states. We generate such trajectories using the quantum Monte Carlo wave-function method. For sparsely distributed detectors, we use methods from renewal theory of stochastic processes to obtain some semianalytic results. In particular, the different regimes of dynamics of the free particle are identified and quantitatively discussed: from stroboscopic motion in the case of low interrogation frequency, to delayed dynamics reminiscent of the Zeno effect if monitoring is frequent. For a semicontinuous spatial distribution of meters the emergence of classical trajectories is shown. Their statistical properties are discussed and compared to other detection schemes in which the operation on the system due to measurement corresponds to ``spatial filtering'' of the wave function.
A continuous projective measurement of a quantum system often leads to a suppression of the dynamics, known as the Zeno effect. Alternatively, generalized nonprojective, so-called 'weak' measurements can be carried out. Such a measurement is parameterized by its strength parameter that can interpolate continuously between the ideal strong measurement with no dynamics—the strict Zeno effect, and a weak measurement characterized by almost free dynamics but blurry observations. Here we analyze the stochastic properties of this uncertainty component in the resulting observation trajectory. The observation uncertainty results from intrinsic quantum uncertainty, the effect of measurement on the system (backaction) and detector noise. It is convenient to separate the latter, system-independent contribution from the system-dependent uncertainty, and this paper shows how to accomplish this separation. The system-dependent uncertainty is found in terms of a quasi-probability, which, despite its weaker properties, is shown to satisfy a weak positivity condition. We discuss the basic properties of this quasi-probability with special emphasis on its time correlation functions as well as their relationship to the full correlation functions along the observation trajectory, and illustrate our general results with simple examples. We demonstrate a violation of classical macrorealism using the fourth-order time correlation functions with respect to the quasi-probability in the two-level system.
In the quantum Zeno effect, quantum measurements can block the coherent oscillation of a two level system by freezing its state to one of the measurement eigenstates. The effect is conventionally controlled by the measurement frequency. Here we study the development of the Zeno regime as a function of the measurement strength for a continuous partial measurement. We show that the onset of the Zeno regime is marked by a cascade of transitions in the system dynamics as the measurement strength is increased. Some of these transitions are only apparent in the collective behavior of individual quantum trajectories and are invisible to the average dynamics. They include the appearance of a region of dynamically inaccessible states and of singularities in the steady-state probability distribution of states. These predicted dynamical features, which can be readily observed in current experiments, show the coexistence of fundamentally unpredictable quantum jumps with those continuously monitored and reverted in recent experiments.
In this thesis we consider primarily the dynamics of quantum systems subjected to continuous observation. In the Schrödinger picture the evolution of a continuously monitored quantum system, referred to as a `quantum trajectory', may be described by a stochastic equation for the state vector. We present a method of deriving explicit evolution operators for linear quantum trajectories, and apply this to a number of physical examples of varying mathematical complexity. In the Heisenberg picture evolution resulting from continuous observation may be described by quantum Langevin equations. We use this method to examine the noise spectrum that results from a continuous observation of the position of a moving mirror, and examine the possibility of detecting the noise resulting from the quantum back-action of the measurement. In addition to the work on continuous measurement theory, we also consider the problem of reconstructing the state of a quantum system from a set of measurements. We present a scheme for determining the state of a single cavity mode from the photon statistics measured both before and after an interaction with one or two two-level atoms.
Abstract Quantum measurement has always been thought of as a formal, sudden projection that changes the system state instantly. However, in real life, the process of measurement involves a physical interaction that takes time to gather the information. The paper discusses the continuous quantum measurement that challenges the traditional instant measurement idea with the detector’s accumulated data continuously uninterruptedly. The paper starts by laying down the basic mathematics, which gradually leads to the modern Stochastic master equations and quantum trajectories through generalized measurements positive operator-valued measures and quantum instruments. The crucial experimental setups like circuit QED, trapped ions, and optomechanics are delineated where these notions have been put into practice. The significant ramifications of ongoing observation are then discussed, starting with the fundamental Zeno effect, measurement backaction, and continuing through the active steering of quantum states and the emergence of measurement-induced phase transitions in many-body systems. One of the main ideas of the paper is the attribute of measurement as a powerful control method which enables real-time feedback, state stabilization, and continuous quantum error correction. Finally, the paper points out the open problems that remain in the areas of many-body systems’ scalability and the coupling of machine learning with real-time quantum control.
The quantum Zeno effect (QZE) reveals that frequent measurements can suppress quantum evolution; however, the impact of measurements on the real-space motion of a single atom remains insufficiently explored experimentally. In this work, we employ an optical trap as a measurement pulse and, by monitoring atomic loss, directly observe the QZE in the real-space motion of a single atom. We find that the action of measurement on the atom consists of a projective measurement followed by subsequent periodic unitary evolution, thereby providing an intuitive physical picture of measurement backaction across different timescales. We further investigate the effects of measurement frequency, strength, and spatial position, demonstrating that measurements pulse not only suppress the spatial spreading of the quantum state but also enable deterministic preparation of distinct motional states. Moreover, by dynamically controlling the trap position, we realize measurement-induced directional transport of a single atom, with a velocity exceeding the maximum allowed by the adiabatic condition. Overall, our results provide a direct experimental demonstration of the QZE in real space and establish a versatile framework for measurement-based control of atomic motion, opening new possibilities for motional-state engineering in cold-atom systems.