Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Chemical Theory and Computation

Rigorous Lower Bounds for the Ground State Energy of Molecules by Employing Necessary N-Representability Conditions

Denis Chaykin, Christian Jansson, Frerich Johannes Keil, Marko Lange, Kai Torben Ohlhus, Siegfried M. Rump

Published Nov 13, 2020• 0 citations
Publisher

Abstract

Electronic structure calculations, in particular the computation of the ground state energy, lead to challenging problems in optimization. These problems are of enormous importance in quantum chemistry for calculations of properties of solids and molecules. Minimization methods for computing the ground state energy can be developed by employing a variational approach, where the second-order reduced density matrix defines the variable. This concept leads to large-scale semidefinite programming problems that provide a lower bound for the ground state energy. Upper bounds of the ground state energy can be calculated for example with the Hartree–Fock method or numerically more exact for a given basis set by full CI. However, Nakata et al. ( J. Chem. Phys. 2001 114 82828292) observed that due to numerical errors the semidefinite solver produced erroneous results with a lower bound significantly larger than the full CI energy. For the LiH, CH –, NH –, OH, OH –, and HF molecules violations within one mhartree were observed. We applied the software VSDP which takes all numerical errors due to floating-point arithmetic operations into consideration. For two test libraries VSDP provides tight rigorous error bounds lower than full CI energies reported with an accuracy of 0.1 to 0.01 mhartree. Only little computation work must be spent in order to compute close rigorous error bounds for the ground state energy.

DOI
10.1021/acs.jctc.0c00497

Related papers

Variational calculations of fermion second-order reduced density matrices by semidefinite programming algorithm

Maho Nakata, Hiroshi Nakatsuji, Masahiro Ehara +3 more

The ground-state fermion second-order reduced density matrix (2-RDM) is determined variationally using itself as a basic variable. As necessary conditions of the N-representability, we used the positive semidefiniteness conditions, P, Q, and G conditions that are described in terms of the 2-RDM. The variational calculations are performed by using recently developed semidefinite programming algorithm (SDPA). The calculated energies of various closed- and open-shell atoms and molecules are excellent, overshooting only slightly the full-CI energies. There was no case where convergence was not achieved. The calculated properties also reproduce well the full-CI results.

The Journal of Chemical Physics•May 15, 2001•282 citations

Variational two-electron reduced density matrix theory for many-electron atoms and molecules: Implementation of the spin- and symmetry-adapted T2 condition through first-order semidefinite programming

David A. Mazziotti

The energy and properties of a many-electron atom or molecule may be directly computed from a variational optimization of a two-electron reduced density matrix (2RDM) that is constrained to represent many-electron quantum systems. In this paper we implement a variational 2RDM method with a representability constraint, known as the ${T}_{2}$ condition. The optimization of the 2RDM is performed with a first-order algorithm for semidefinite programming [D. A. Mazziotti, Phys. Rev. Lett. 93, 213001 (2004)] which, because of its lower computational cost in comparison to second-order methods, allows the treatment of larger basis sets. We also derive and implement a spin- and symmetry-adapted formulation of the ${T}_{2}$ condition that significantly decreases the size of the largest block in the ${T}_{2}$ matrix. The ${T}_{2}$ condition, originally derived by Erdahl [Int. J. Quantum Chem. 13, 697 (1978)], was recently applied via a second-order algorithm to atoms and molecules [Z. Zhao et al., J. Chem. Phys. 120, 2095 (2004)]. While these calculations were restricted to molecules at equilibrium geometries in minimal basis sets, we apply the 2RDM method with the ${T}_{2}$ condition to compute the electronic energies of molecules in both minimal and nonminimal basis sets at equilibrium as well as nonequilibrium geometries. Accurate potential energies curves are produced for BH, HF, and ${\mathrm{N}}_{2}$. Results are compared with the 2RDM method without the ${T}_{2}$ condition as well as several wave-function methods.

Physical Review A•Sep 30, 2005•74 citations

First-order semidefinite programming for the two-electron treatment of many-electron atoms and molecules

David A. Mazziotti

The ground-state energy and properties of any many-electron atom or molecule may be rigorously computed by variationally computing the two-electron reduced density matrix rather than the many-electron wavefunction. While early attempts fifty years ago to compute the ground-state 2-RDM directly were stymied because the 2-RDM must be constrained to represent an N-electron wavefunction, recent advances in theory and optimization have made direct computation of the 2-RDM possible. The constraints in the variational calculation of the 2-RDM require a special optimization known as a semidefinite programming. Development of first-order semidefinite programming for the 2-RDM method has reduced the computational costs of the calculation by orders of magnitude [Mazziotti, Phys. Rev. Lett. 93 (2004) 213001]. The variational 2-RDM approach is effective at capturing multi-reference correlation effects that are especially important at non-equilibrium molecular geometries. Recent work on 2-RDM methods will be reviewed and illustrated with particular emphasis on the importance of advances in large-scale semidefinite programming.

ESAIM Mathematical Modelling and Numerical Analysis•Mar 1, 2007•35 citations

Variational calculation of second-order reduced density matrices by strong N-representability conditions and an accurate semidefinite programming solver

Maho Nakata, Bastiaan J. Braams, Katsuki Fujisawa +4 more

The reduced density matrix (RDM) method, which is a variational calculation based on the second-order reduced density matrix, is applied to the ground state energies and the dipole moments for 57 different states of atoms, molecules, and to the ground state energies and the elements of 2-RDM for the Hubbard model. We explore the well-known N-representability conditions (P, Q, and G) together with the more recent and much stronger T1 and T2(') conditions. T2(') condition was recently rederived and it implies T2 condition. Using these N-representability conditions, we can usually calculate correlation energies in percentage ranging from 100% to 101%, whose accuracy is similar to CCSD(T) and even better for high spin states or anion systems where CCSD(T) fails. Highly accurate calculations are carried out by handling equality constraints and/or developing multiple precision arithmetic in the semidefinite programming (SDP) solver. Results show that handling equality constraints correctly improves the accuracy from 0.1 to 0.6 mhartree. Additionally, improvements by replacing T2 condition with T2(') condition are typically of 0.1-0.5 mhartree. The newly developed multiple precision arithmetic version of SDP solver calculates extraordinary accurate energies for the one dimensional Hubbard model and Be atom. It gives at least 16 significant digits for energies, where double precision calculations gives only two to eight digits. It also provides physically meaningful results for the Hubbard model in the high correlation limit.

The Journal of Chemical Physics•Apr 28, 2008•75 citations

First-order semidefinite programming for the direct determination of two-electron reduced density matrices with application to many-electron atoms and molecules

David A. Mazziotti

Direct variational calculation of two-electron reduced density matrices (2-RDMs) for many-electron atoms and molecules in nonminimal basis sets has recently been achieved through the use of first-order semidefinite programming [D. A. Mazziotti, Phys. Rev. Lett. (in press)]. With semidefinite programming, the electronic ground-state energy of a molecule is minimized with respect to the 2-RDM subject to N-representability constraints known as positivity conditions. Here we present a detailed account of the first-order algorithm for semidefinite programming and its comparison with the primal-dual interior-point algorithms employed in earlier variational 2-RDM calculations. The first-order semidefinite-programming algorithm, computations show, offers an orders-of-magnitude reduction in floating-point operations and storage in comparison with previous implementations. We also examine the ability of the positivity conditions to treat strong correlation and multireference effects through an analysis of the Hamiltonians for which the conditions are exact. Calculations are performed in nonminimal basis sets for a variety of atoms and molecules and the potential-energy curves for CO and H(2)O.

The Journal of Chemical Physics•Nov 30, 2004•87 citations

Molecular Ground-State Energy Estimation Using VQE

Enoth Kumar N, Irene S, Vinod Jani +2 more

Classical simulation of molecular electronic structure is often limited by the rapid increase in computational cost associated with describing electron correlation. The Variational Quantum Eigensolver (VQE) is one hybrid quantum-classical approach ideally adapted to the Noisy Intermediate-Scale Quantum (NISQ) regime. This work applies the VQE algorithm to compute ground state energies of a set of molecules:$\mathrm{H}_{2}, \mathrm{H}_{3}^{+}, \text{LiH}, \text{HF}, \text{OH}^{-}, \mathrm{H}_{2} \mathrm{O}, \text{BH}_{3}, \text{CH}_{4}$, and$\text{NH}_{3}$. The approach utilizes the Unitary Coupled Cluster for Single and Double excitations (UCCSD) ansatz along with the Bravyi-Kitaev transformation for fermionic-to-qubit encoding. Quantum simulation outputs are systematically benchmarked against Full Configuration Interaction (FCI), a numerically exact traditional approach, and Unrestricted Hartree-Fock (UHF). The results establish a robust consistency of the VQE-obtained molecular ground state energies against standard FCI and UHF benchmarks. This research provides a critical benchmark, confirming that VQE has the capability for high-precision molecular simulations and playing the role of a pivotal stepping stone toward revolutionizing applications in drug discovery and materials science.

IEEE Pune Section International Conference (PuneCon)•Dec 12, 2025•0 citations
Electronic structure calculations, in particular the computation of the ground state energy, lead to challenging problems in optimization. These problems are of enormous importance in quantum chemistry for calculations of properties of solids and molecules. Minimization methods for computing the ground state energy can be developed by employing a variational approach, where the second-order reduced density matrix defines the variable. This concept leads to large-scale semidefinite programming problems that provide a lower bound for the ground state energy. Upper bounds of the ground state energy can be calculated for example with the Hartree–Fock method or numerically more exact for a given basis set by full CI. However, Nakata et al. ( J. Chem. Phys. 2001 114 82828292) observed that due to numerical errors the semidefinite solver produced erroneous results with a lower bound significantly larger than the full CI energy. For the LiH, CH –, NH –, OH, OH –, and HF molecules violations within one mhartree were observed. We applied the software VSDP which takes all numerical errors due to floating-point arithmetic operations into consideration. For two test libraries VSDP provides tight rigorous error bounds lower than full CI energies reported with an accuracy of 0.1 to 0.01 mhartree. Only little computation work must be spent in order to compute close rigorous error bounds for the ground state energy.
The ground-state fermion second-order reduced density matrix (2-RDM) is determined variationally using itself as a basic variable. As necessary conditions of the N-representability, we used the positive semidefiniteness conditions, P, Q, and G conditions that are described in terms of the 2-RDM. The variational calculations are performed by using recently developed semidefinite programming algorithm (SDPA). The calculated energies of various closed- and open-shell atoms and molecules are excellent, overshooting only slightly the full-CI energies. There was no case where convergence was not achieved. The calculated properties also reproduce well the full-CI results.
The energy and properties of a many-electron atom or molecule may be directly computed from a variational optimization of a two-electron reduced density matrix (2RDM) that is constrained to represent many-electron quantum systems. In this paper we implement a variational 2RDM method with a representability constraint, known as the T2{T}_{2}T2​ condition. The optimization of the 2RDM is performed with a first-order algorithm for semidefinite programming [D. A. Mazziotti, Phys. Rev. Lett. 93, 213001 (2004)] which, because of its lower computational cost in comparison to second-order methods, allows the treatment of larger basis sets. We also derive and implement a spin- and symmetry-adapted formulation of the T2{T}_{2}T2​ condition that significantly decreases the size of the largest block in the T2{T}_{2}T2​ matrix. The T2{T}_{2}T2​ condition, originally derived by Erdahl [Int. J. Quantum Chem. 13, 697 (1978)], was recently applied via a second-order algorithm to atoms and molecules [Z. Zhao et al., J. Chem. Phys. 120, 2095 (2004)]. While these calculations were restricted to molecules at equilibrium geometries in minimal basis sets, we apply the 2RDM method with the T2{T}_{2}T2​ condition to compute the electronic energies of molecules in both minimal and nonminimal basis sets at equilibrium as well as nonequilibrium geometries. Accurate potential energies curves are produced for BH, HF, and N2{\mathrm{N}}_{2}N2​. Results are compared with the 2RDM method without the T2{T}_{2}T2​ condition as well as several wave-function methods.
The ground-state energy and properties of any many-electron atom or molecule may be rigorously computed by variationally computing the two-electron reduced density matrix rather than the many-electron wavefunction. While early attempts fifty years ago to compute the ground-state 2-RDM directly were stymied because the 2-RDM must be constrained to represent an N-electron wavefunction, recent advances in theory and optimization have made direct computation of the 2-RDM possible. The constraints in the variational calculation of the 2-RDM require a special optimization known as a semidefinite programming. Development of first-order semidefinite programming for the 2-RDM method has reduced the computational costs of the calculation by orders of magnitude [Mazziotti, Phys. Rev. Lett. 93 (2004) 213001]. The variational 2-RDM approach is effective at capturing multi-reference correlation effects that are especially important at non-equilibrium molecular geometries. Recent work on 2-RDM methods will be reviewed and illustrated with particular emphasis on the importance of advances in large-scale semidefinite programming.
The reduced density matrix (RDM) method, which is a variational calculation based on the second-order reduced density matrix, is applied to the ground state energies and the dipole moments for 57 different states of atoms, molecules, and to the ground state energies and the elements of 2-RDM for the Hubbard model. We explore the well-known N-representability conditions (P, Q, and G) together with the more recent and much stronger T1 and T2(') conditions. T2(') condition was recently rederived and it implies T2 condition. Using these N-representability conditions, we can usually calculate correlation energies in percentage ranging from 100% to 101%, whose accuracy is similar to CCSD(T) and even better for high spin states or anion systems where CCSD(T) fails. Highly accurate calculations are carried out by handling equality constraints and/or developing multiple precision arithmetic in the semidefinite programming (SDP) solver. Results show that handling equality constraints correctly improves the accuracy from 0.1 to 0.6 mhartree. Additionally, improvements by replacing T2 condition with T2(') condition are typically of 0.1-0.5 mhartree. The newly developed multiple precision arithmetic version of SDP solver calculates extraordinary accurate energies for the one dimensional Hubbard model and Be atom. It gives at least 16 significant digits for energies, where double precision calculations gives only two to eight digits. It also provides physically meaningful results for the Hubbard model in the high correlation limit.
Direct variational calculation of two-electron reduced density matrices (2-RDMs) for many-electron atoms and molecules in nonminimal basis sets has recently been achieved through the use of first-order semidefinite programming [D. A. Mazziotti, Phys. Rev. Lett. (in press)]. With semidefinite programming, the electronic ground-state energy of a molecule is minimized with respect to the 2-RDM subject to N-representability constraints known as positivity conditions. Here we present a detailed account of the first-order algorithm for semidefinite programming and its comparison with the primal-dual interior-point algorithms employed in earlier variational 2-RDM calculations. The first-order semidefinite-programming algorithm, computations show, offers an orders-of-magnitude reduction in floating-point operations and storage in comparison with previous implementations. We also examine the ability of the positivity conditions to treat strong correlation and multireference effects through an analysis of the Hamiltonians for which the conditions are exact. Calculations are performed in nonminimal basis sets for a variety of atoms and molecules and the potential-energy curves for CO and H(2)O.
Classical simulation of molecular electronic structure is often limited by the rapid increase in computational cost associated with describing electron correlation. The Variational Quantum Eigensolver (VQE) is one hybrid quantum-classical approach ideally adapted to the Noisy Intermediate-Scale Quantum (NISQ) regime. This work applies the VQE algorithm to compute ground state energies of a set of molecules:H2,H3+,LiH,HF,OH−,H2O,BH3,CH4\mathrm{H}_{2}, \mathrm{H}_{3}^{+}, \text{LiH}, \text{HF}, \text{OH}^{-}, \mathrm{H}_{2} \mathrm{O}, \text{BH}_{3}, \text{CH}_{4}H2​,H3+​,LiH,HF,OH−,H2​O,BH3​,CH4​, andNH3\text{NH}_{3}NH3​. The approach utilizes the Unitary Coupled Cluster for Single and Double excitations (UCCSD) ansatz along with the Bravyi-Kitaev transformation for fermionic-to-qubit encoding. Quantum simulation outputs are systematically benchmarked against Full Configuration Interaction (FCI), a numerically exact traditional approach, and Unrestricted Hartree-Fock (UHF). The results establish a robust consistency of the VQE-obtained molecular ground state energies against standard FCI and UHF benchmarks. This research provides a critical benchmark, confirming that VQE has the capability for high-precision molecular simulations and playing the role of a pivotal stepping stone toward revolutionizing applications in drug discovery and materials science.