Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cavity QED based on room temperature atoms interacting with a photonic crystal cavity : a feasibility study

Hadiseh Alaeian, Ralf Ritter, Muamera Basic, Robert Löw, Tilman Pfau

Published Jan 1, 2020• 14 citations
Publisher

Abstract

The paradigm of cavity QED is a two-level emitter interacting with a high-quality factor single-mode optical resonator. The hybridization of the emitter and photon wave functions mandates large vacuum Rabi frequencies and long coherence times; features that so far have been successfully realized with trapped cold atoms and ions, and localized solid-state quantum emitters such as superconducting circuits, quantum dots, and color centers Reiserer and Rempe (Rev Modern Phys 87:1379, 2015), Faraon et al. (Phys Rev 81:033838, 2010). Thermal atoms, on the other hand, provide us with a dense emitter ensemble and in comparison to the cold systems are more compatible with integration, hence enabling large-scale quantum systems. However, their thermal motion and large transit-time broadening is a major bottleneck that has to be circumvented. A promising remedy could benefit from the highly controllable and tunable electromagnetic fields of a nano-photonic cavity with strong local electric-field enhancements. Utilizing this feature, here we investigate the interaction between fast moving thermal atoms and a nano-beam photonic crystal cavity (PCC) with large quality factor and small mode volume. Through fully quantum mechanical calculations, including Casimir-Polder potential (i.e. the effect of the surface on radiation properties of an atom), we show, when designed properly, the achievable coupling between the flying atom and the cavity photon would be strong enough to lead to quantum interference effects in spite of short interaction times. In addition, the time-resolved detection of different trajectories can be used to identify single and multiple atom counts. This probabilistic approach will find applications in cavity QED studies in dense atomic media and paves the way towards realizing large-scale, room-temperature macroscopic quantum systems aimed at out of the lab quantum devices.

DOI
10.18419/opus-13110

Related papers

Cavity QED based on room temperature atoms interacting with a photonic crystal cavity: a feasibility study

Hadiseh Alaeian, Ralf Ritter, Muamera Basic +2 more

Abstract The paradigm of cavity QED is a two-level emitter interacting with a high-quality factor single-mode optical resonator. The hybridization of the emitter and photon wave functions mandates large vacuum Rabi frequencies and long coherence times; features that so far have been successfully realized with trapped cold atoms and ions, and localized solid-state quantum emitters such as superconducting circuits, quantum dots, and color centers Reiserer and Rempe (Rev Modern Phys 87:1379, 2015), Faraon et al. (Phys Rev 81:033838, 2010). Thermal atoms, on the other hand, provide us with a dense emitter ensemble and in comparison to the cold systems are more compatible with integration, hence enabling large-scale quantum systems. However, their thermal motion and large transit-time broadening is a major bottleneck that has to be circumvented. A promising remedy could benefit from the highly controllable and tunable electromagnetic fields of a nano-photonic cavity with strong local electric-field enhancements. Utilizing this feature, here we investigate the interaction between fast moving thermal atoms and a nano-beam photonic crystal cavity (PCC) with large quality factor and small mode volume. Through fully quantum mechanical calculations, including Casimir–Polder potential (i.e. the effect of the surface on radiation properties of an atom), we show, when designed properly, the achievable coupling between the flying atom and the cavity photon would be strong enough to lead to quantum interference effects in spite of short interaction times. In addition, the time-resolved detection of different trajectories can be used to identify single and multiple atom counts. This probabilistic approach will find applications in cavity QED studies in dense atomic media and paves the way towards realizing large-scale, room-temperature macroscopic quantum systems aimed at out of the lab quantum devices.

arXiv:1907.04680•Applied Physics B•Jan 16, 2020•22 citations

Focus section on Cavity QED

Wolfgang Lange, Jean‐Michel Gérard

A single two-level emitter coupled to a single mode of an electromagnetic resonator constitutes the most fundamental instance of light--matter interaction. Realizations of this type of system are investigated in the field of cavity quantum electrodynamics (cavity QED). Particularly important are schemes in which the coupling is strong enough to exceed the spontaneous emission rate as well as cavity damping. In this case, the coherent exchange of excitation between source and photon is the dominating process, providing the unique possibility to deterministically control the quantum evolution of the system. Great progress has recently been accomplished, technologically as well as conceptually, and the focus section in this issue of Journal of Optics B: Quantum and Semiclassical Optics features five articles highlighting important recent developments in the field. Strong coupling between single atoms and the electromagnetic cavity field have been achieved in two distinct regimes, the optical and the microwave region. The latter is represented by the micromaser, a high-Q microwave cavity pumped by a beam of highly excited Rydberg atoms. It has proved to be an almost ideal system for the generation of non-classical field states. A constraint in these experiments is the fact that the field inside the cavity can only be examined indirectly, by analysing the occupation of atoms leaving the cavity. While only two atomic states were previously identified for this purpose, V A Reshetov shows in his article (pages 119--126) that more information on the field may be extracted by taking advantage of the Zeeman substructure of the atomic levels. In the optical domain of cavity QED, by contrast, the state of the resonator field may be probed directly by measuring the light leaking from the cavity using photodetectors. In order to minimize damping, high-quality cavities must be employed. In most optical experiments these are Fabry--Perot resonators with ultra-high reflectivity mirrors, with losses as low as a few parts per million being state of the art. At the same time, the coupling of atoms and photons is enhanced by reducing the length of the cavity, so that strong coupling conditions are reached. A very attractive application of this type of cavity QED setup is the possibility of exerting control over the quantum dynamics of the system. An impressive example is the implementation of quantum feedback, reported in the paper by W P Smith and L A Orozco (pages 127--134). Using information gained from detecting a single photon escaping from the cavity, active feedback is applied to halt the dynamical evolution of the system. This is the first time active feedback has been used to modify the quantum evolution of a system at the single-photon level. The authors discuss how detunings between the subsystems affect the quantum feedback, an issue particularly relevant for ensembles of atoms with a spread in detuning. Perfect quantum feedback in this case requires the use of additional parameters to control the system. The majority of optical cavity QED experiments performed so far have used as a medium atoms traversing the cavity on random trajectories, such as, for example, thermal atomic beams. In this case, the observation of quantum effects is degraded in two ways. The Doppler effect and the finite transit time lead to line broadening, while the spatial structure of the cavity mode results in atoms in different locations experiencing different coupling with the photonic field. J E Reiner et al (pages 135--142) investigate the impact of these effects on quantum fluctuations in their cavity QED system. In order to overcome line broadening, they have developed a continuous cold atomic beam, extracted from a magneto-optical trap. An even better control of broadening effects and fluctuating coupling strength is provided by trapping the atoms inside the cavity and cooling them to temperatures at which their position spread is smaller than the optical wavelength. Much recent activity has been devoted to developing such an ultimate cavity QED system. A Vukics et al (pages 143--153) present a theoretical proposal for dynamically trapping and cooling atoms inside a cavity. By driving the atoms with a standing wave injected from the side of the cavity and by weakly exciting the cavity field itself, they predict three-dimensional trapping of the atom for periods around 1 second, an extremely long time on the typical scale of cavity QED dynamics. The essential component of their scheme is the interference between the two driving fields, determining the temperature of the particle and the stable trapping positions. In the quest for better confinement of radiation, lately, an appealing alternative to the Fabry--Perot cavity has been investigated -- the optical microsphere resonator. A sphere with a diameter of a few tens of microns, it supports so-called whispering gallery modes near its circumference, for which quality factors up to 10 10 have been measured. In order to exploit the correspondingly low field damping rates for cavity QED, a method must be found to couple atomic or solid state emitters to these modes. S Göotzinger et al (pages 154--158) report the coupling of single nanocrystals on the surface of a microsphere through the evanescent field of the mode. Selective excitation of a single nano-emitter was accomplished with a scanning confocal microscope. The system is a promising candidate for cavity QED with single-quantum emitters. The ability to fully control the quantum dynamics of atoms and light is beginning to spawn early applications. The most notable example is quantum information processing. This requires the coherent manipulation of single-quantum systems, which is ideally provided by cavity QED interaction in the strong-coupling limit. The development of practical devices will be among the principal future tasks for research in the field. This will include physical systems, which have not been covered in this issue, such as semiconductors, quantum dots as emitters, or photonic crystals as resonator structures. Cavity QED is therefore guaranteed to remain a vigorous field in the years to come.

Journal of Optics B Quantum and Semiclassical Optics•Feb 1, 2004•0 citations

Strong interactions between integrated microresonators and alkali atomic vapors: towards single-atom, single-photon operation

Roy Zektzer, Xiyuan Lu, Khoi Tuan Hoang +9 more

Cavity quantum electrodynamics (cQED), the interaction of a two-level system with a high quality factor ( Q ) cavity, is a foundational building block in different architectures for quantum computation, communication, and metrology. The strong interaction between the atom and the cavity enables single-photon operation, which is required for quantum gates and sources. Cold atoms, quantum dots, and color centers in crystals are among the systems that have shown single-photon operations, but they require significant physical infrastructure. Atomic vapors, on the other hand, require limited experimental infrastructure and are hence much easier to deploy outside a laboratory, but they consist of an ensemble of moving atoms that results in short interaction times involving multiple atoms, which can hamper quantum operations. A solution to this issue can be found in nanophotonic cavities, where the optical mode is confined to a small volume and light-matter interaction is enhanced, so that fast single-atom, single-photon operations are enabled. In this work, we study the interaction of an atomically clad microring resonator (ACMRR) with different-sized ensembles of Rb atoms. We demonstrate strong coupling between an ensemble of ≈50 atoms interacting with a high quality factor ( Q =4.3×10 5 ) ACMRR, yielding a many-atom cooperativity C =(5.5±0.3). We continue to observe signatures of atom-photon interaction for a few (<3) atoms, for which we observe saturation at the level of a few intracavity photons. Further development of our platform, which includes integrated thermo-optic heaters to enable cavity tuning and stabilization, should enable the observation of interactions between single photons and single atoms.

arXiv:2404.04372•Optica•Sep 3, 2024•17 citations

Self-assembled quantum dots in a fully tunable microcavity

Lukas Greuter

The interaction of light with matter is at the heart of quantum optics, which itself enables insight into the fundamental aspects of quantum mechanics. First experimental access to this research field has been realized by coupling atoms to light. Here, the transition between discrete energy states of the atom is associated with the absorption and emission of a photon, a single quantum of the electromagnetic field. As a central aspect of quantum optics, the light-emitter interaction can be significantly enhanced by placing the emitter in optical cavity that is on resonance with the emitter. In recent years, this has led to a rapidly evolving research field known as cavity quantum electrodynamics (CQED). In CQED two different regimes are distinguished: the strong and the weak coupling regimes. In the strong coupling regime, the emitted photon is reflected from the cavity mirrors and eventually reabsorbed by the emitter. In contrast, the weak coupling regime describes the irreversible emission, where the photon leaks out of the cavity before it can be reabsorbed. Both the weak and strong coupling regimes enabled fundamental experiments for a better understanding of quantum optical phenomena. \n \n \n \nCQED grants access to the quantum world and hence offers potentially revolutionizing applications, particularly in the field of quantum information processing. A central aspect for the successful implementation of quantum applications is the system's scalability. Unfortunately, placing atoms deterministically inside a cavity remains technologically elaborate and hence minimizes the prospect of scaling a atom-CQED system. \n \nA possibility to address this issue is to implement CQED in the solid state, where sophisticated fabrication strategies allow miniaturization and scalability of the system. Particularly the development of self-assembled quantum dots (QD) in semiconductors represent a promising route. QDs can be considered as artificial atoms that mimic the atomic two-level system. These structures interact strongly with light and therefore have the potential for replacing atoms in CQED. As a central advantage, QDs are naturally trapped, which greatly simplifies the deterministic incorporation into the cavity. \n \nIn recent years, many efforts have been made to couple self-assembled QDs to microcavities. Generally, the successful implementation of CQED requires a cavity with a high quality factor Q and a low mode volume. In a majority of the approaches, the high Q/small mode volume cavities were monolithically defined around the QD, embedding the QD at a fixed position inside the cavity. Both the weak and strong coupling regimes have been reached with these systems. However, for future applications they suffer from several disadvantages. The fixed position of the QD inside the cavity minimizes the prospects for spectral tunability and spatial positioning the QD inside the cavity. Furthermore, prospects for further increasing of the cavity Q-factor and minimization of the mode volume remain limited in these systems. \n \nIn this thesis the mentioned disadvantages are addressed by developing a fully tunable miniaturized Fabry-Pérot microcavity with low mode volume. The design enables both spatial positioning of the emitter inside the cavity and spectral tunability. Successful coupling of a single QD to the microcavity is demonstrated including the strong coupling regime. Further a new approach to decrease the cavity mode volume is presented, where we demonstrate weak coupling is achieved

•Jan 1, 2015•0 citations

Coupling cold atoms to nanophotonics: a novel platform for quantum nonlinear optics

Darrick E. Chang

Techniques to controllably interface atoms with quantum optical fields form the basis for many applications in quantum information science. For example, photons are convenient to relay information over large quantum networks, while atoms naturally are physical systems that can process and store this information. Thus far, the available techniques to efficiently couple single photons with atomic media fall into one of the following, mostly independent, categories: i) cavity quantum electrodynamics (QED), where atomic interactions with light are enhanced via a high-finesse cavity, ii) coherent coupling with atomic ensembles exhibiting large optical depths, and iii) the use of fields tightly focused to dimensions smaller than or approaching the scattering cross-section of a single atom. Although remarkable achievements have been made with all of these approaches, a robust, scalable technique remains elusive. Recently, several groups have successfully demonstrated that cold atoms can be trapped near and interfaced with nanophotonic systems, such as hollow-core photonic crystal fibers [1] and tapered nanofibers [2–4]. The traps are well-characterized [2, 3, 5], and the nearly diffraction-limited transverse confinement of optical fields enables ∼ 10% coupling efficiency of a single atom to the fiber [2, 3]. This has already led to remarkable observations of strong light-matter interactions using relatively few atoms and low powers [1]. It has also been proposed that such techniques can be extended to highly configurable photonic crystal waveguides [6]. Together, these efforts raise the intriguing possibility for future nanophotonic systems with tremendous figures of merit, wherein atom-light interactions can be tailored nearly at will. Here, we discuss recent efforts to develop novel techniques to realize strong, controllable atom-photon and photon-photon interactions, which take full advantage of the parameter space afforded by nanophotonic interfaces and are not based upon the extension of existing techniques. As a specific example, we discuss a protocol to achieve “all-atomic” cavity QED [7], as briefly described below. First, we show that although the single-atom coupling to guided modes of a nanophotonic waveguide might be relatively weak, there exist collective modes of a trapped atomic ensemble whose coupling to light is enhanced by the square root of the atom number, √ NA. While collective effects are generally well-known, special consequences emerge in the nanofiber system when the atoms are trapped in a lattice. In particular, collective effects cause such a lattice to act as a near-perfect mirror for an incident field close to resonance. In analogy to cavity QED, we then demonstrate that two sets of atomic mirrors can form an effective cavity, which can greatly enhance the coupling of a single, specially chosen “impurity” atom (or a few impurity atoms) positioned inside. We introduce a novel quantum spin model to describe the atom-light coupling, which allows one to exactly map the atom-nanofiber interface onto the simple and elegant Jaynes-Cummings model of cavity QED [8]. A unique feature of our atomic mirrors compared to conventional cavities is that they have long relaxation times and are highly dispersive. Remarkably, even with very low mirror finesse (F ∼ 10 2 ), this property allows one to attain the “strong coupling” regime of cavity QED, where vacuum Rabi oscillations [9–12] occur between an excited impurity atom and a single “photon” stored in the cavity (or more precisely, in the atomic mirrors). Furthermore, as quantum mechanical objects, these atom mirrors can be used to store quantum information and transfer this information into propagating waveguide modes. These various features can be combined to realize all of the building blocks for scalable quantum information processing.

•Jan 1, 2013•0 citations

Real-time measurement and trapping of single atoms by single photons

Christina J. Hood

Cavity quantum electrodynamics (QED), the system of a single atom interacting with a single mode of a high finesse optical resonator, has tremendous potential for use in quantum logic, quantum information processing, and in enabling observation of quantum mechanical effects in the laboratory. The work of this thesis demonstrates a number of steps toward realizing these goals, by employing an experimental system with the strongest atom-field coupling achieved to date in optical cavity QED. The effects of strong coupling in cavity QED are studied for single cold atoms measured one at a time, in real time. The passage of single atoms through the cavity is employed to map out the frequency response of the system, and to demonstrate that quantum rather than semiclassical theory provides the correct theoretical model. The mechanical effects of strong coupling on single atoms are explored, these experiments demonstrating the first trapping of single atoms with single photons. Additionally, strong coupling enables high signal-to-noise ratio for monitoring atomic position at single photon field strengths; this capability is employed to investigate the motion of atoms trapped within the cavity. The transmitted cavity field is used to reconstruct the trajectories of single atoms, thereby realizing a new form of microscopy - the Atom-Cavity Microscope. Technical developments necessary to create the cavities used in this experiment are detailed. Ideas for future extensions to the experiment are proposed; a zero light-shift dipole force trap, and measurement of photon statistics of a single strongly coupled atom (which realizes a photon blockade device) are discussed.

•Nov 1, 2000•16 citations
The paradigm of cavity QED is a two-level emitter interacting with a high-quality factor single-mode optical resonator. The hybridization of the emitter and photon wave functions mandates large vacuum Rabi frequencies and long coherence times; features that so far have been successfully realized with trapped cold atoms and ions, and localized solid-state quantum emitters such as superconducting circuits, quantum dots, and color centers Reiserer and Rempe (Rev Modern Phys 87:1379, 2015), Faraon et al. (Phys Rev 81:033838, 2010). Thermal atoms, on the other hand, provide us with a dense emitter ensemble and in comparison to the cold systems are more compatible with integration, hence enabling large-scale quantum systems. However, their thermal motion and large transit-time broadening is a major bottleneck that has to be circumvented. A promising remedy could benefit from the highly controllable and tunable electromagnetic fields of a nano-photonic cavity with strong local electric-field enhancements. Utilizing this feature, here we investigate the interaction between fast moving thermal atoms and a nano-beam photonic crystal cavity (PCC) with large quality factor and small mode volume. Through fully quantum mechanical calculations, including Casimir-Polder potential (i.e. the effect of the surface on radiation properties of an atom), we show, when designed properly, the achievable coupling between the flying atom and the cavity photon would be strong enough to lead to quantum interference effects in spite of short interaction times. In addition, the time-resolved detection of different trajectories can be used to identify single and multiple atom counts. This probabilistic approach will find applications in cavity QED studies in dense atomic media and paves the way towards realizing large-scale, room-temperature macroscopic quantum systems aimed at out of the lab quantum devices.
Abstract The paradigm of cavity QED is a two-level emitter interacting with a high-quality factor single-mode optical resonator. The hybridization of the emitter and photon wave functions mandates large vacuum Rabi frequencies and long coherence times; features that so far have been successfully realized with trapped cold atoms and ions, and localized solid-state quantum emitters such as superconducting circuits, quantum dots, and color centers Reiserer and Rempe (Rev Modern Phys 87:1379, 2015), Faraon et al. (Phys Rev 81:033838, 2010). Thermal atoms, on the other hand, provide us with a dense emitter ensemble and in comparison to the cold systems are more compatible with integration, hence enabling large-scale quantum systems. However, their thermal motion and large transit-time broadening is a major bottleneck that has to be circumvented. A promising remedy could benefit from the highly controllable and tunable electromagnetic fields of a nano-photonic cavity with strong local electric-field enhancements. Utilizing this feature, here we investigate the interaction between fast moving thermal atoms and a nano-beam photonic crystal cavity (PCC) with large quality factor and small mode volume. Through fully quantum mechanical calculations, including Casimir–Polder potential (i.e. the effect of the surface on radiation properties of an atom), we show, when designed properly, the achievable coupling between the flying atom and the cavity photon would be strong enough to lead to quantum interference effects in spite of short interaction times. In addition, the time-resolved detection of different trajectories can be used to identify single and multiple atom counts. This probabilistic approach will find applications in cavity QED studies in dense atomic media and paves the way towards realizing large-scale, room-temperature macroscopic quantum systems aimed at out of the lab quantum devices.
A single two-level emitter coupled to a single mode of an electromagnetic resonator constitutes the most fundamental instance of light--matter interaction. Realizations of this type of system are investigated in the field of cavity quantum electrodynamics (cavity QED). Particularly important are schemes in which the coupling is strong enough to exceed the spontaneous emission rate as well as cavity damping. In this case, the coherent exchange of excitation between source and photon is the dominating process, providing the unique possibility to deterministically control the quantum evolution of the system. Great progress has recently been accomplished, technologically as well as conceptually, and the focus section in this issue of Journal of Optics B: Quantum and Semiclassical Optics features five articles highlighting important recent developments in the field. Strong coupling between single atoms and the electromagnetic cavity field have been achieved in two distinct regimes, the optical and the microwave region. The latter is represented by the micromaser, a high-Q microwave cavity pumped by a beam of highly excited Rydberg atoms. It has proved to be an almost ideal system for the generation of non-classical field states. A constraint in these experiments is the fact that the field inside the cavity can only be examined indirectly, by analysing the occupation of atoms leaving the cavity. While only two atomic states were previously identified for this purpose, V A Reshetov shows in his article (pages 119--126) that more information on the field may be extracted by taking advantage of the Zeeman substructure of the atomic levels. In the optical domain of cavity QED, by contrast, the state of the resonator field may be probed directly by measuring the light leaking from the cavity using photodetectors. In order to minimize damping, high-quality cavities must be employed. In most optical experiments these are Fabry--Perot resonators with ultra-high reflectivity mirrors, with losses as low as a few parts per million being state of the art. At the same time, the coupling of atoms and photons is enhanced by reducing the length of the cavity, so that strong coupling conditions are reached. A very attractive application of this type of cavity QED setup is the possibility of exerting control over the quantum dynamics of the system. An impressive example is the implementation of quantum feedback, reported in the paper by W P Smith and L A Orozco (pages 127--134). Using information gained from detecting a single photon escaping from the cavity, active feedback is applied to halt the dynamical evolution of the system. This is the first time active feedback has been used to modify the quantum evolution of a system at the single-photon level. The authors discuss how detunings between the subsystems affect the quantum feedback, an issue particularly relevant for ensembles of atoms with a spread in detuning. Perfect quantum feedback in this case requires the use of additional parameters to control the system. The majority of optical cavity QED experiments performed so far have used as a medium atoms traversing the cavity on random trajectories, such as, for example, thermal atomic beams. In this case, the observation of quantum effects is degraded in two ways. The Doppler effect and the finite transit time lead to line broadening, while the spatial structure of the cavity mode results in atoms in different locations experiencing different coupling with the photonic field. J E Reiner et al (pages 135--142) investigate the impact of these effects on quantum fluctuations in their cavity QED system. In order to overcome line broadening, they have developed a continuous cold atomic beam, extracted from a magneto-optical trap. An even better control of broadening effects and fluctuating coupling strength is provided by trapping the atoms inside the cavity and cooling them to temperatures at which their position spread is smaller than the optical wavelength. Much recent activity has been devoted to developing such an ultimate cavity QED system. A Vukics et al (pages 143--153) present a theoretical proposal for dynamically trapping and cooling atoms inside a cavity. By driving the atoms with a standing wave injected from the side of the cavity and by weakly exciting the cavity field itself, they predict three-dimensional trapping of the atom for periods around 1 second, an extremely long time on the typical scale of cavity QED dynamics. The essential component of their scheme is the interference between the two driving fields, determining the temperature of the particle and the stable trapping positions. In the quest for better confinement of radiation, lately, an appealing alternative to the Fabry--Perot cavity has been investigated -- the optical microsphere resonator. A sphere with a diameter of a few tens of microns, it supports so-called whispering gallery modes near its circumference, for which quality factors up to 10 10 have been measured. In order to exploit the correspondingly low field damping rates for cavity QED, a method must be found to couple atomic or solid state emitters to these modes. S Göotzinger et al (pages 154--158) report the coupling of single nanocrystals on the surface of a microsphere through the evanescent field of the mode. Selective excitation of a single nano-emitter was accomplished with a scanning confocal microscope. The system is a promising candidate for cavity QED with single-quantum emitters. The ability to fully control the quantum dynamics of atoms and light is beginning to spawn early applications. The most notable example is quantum information processing. This requires the coherent manipulation of single-quantum systems, which is ideally provided by cavity QED interaction in the strong-coupling limit. The development of practical devices will be among the principal future tasks for research in the field. This will include physical systems, which have not been covered in this issue, such as semiconductors, quantum dots as emitters, or photonic crystals as resonator structures. Cavity QED is therefore guaranteed to remain a vigorous field in the years to come.
Cavity quantum electrodynamics (cQED), the interaction of a two-level system with a high quality factor ( Q ) cavity, is a foundational building block in different architectures for quantum computation, communication, and metrology. The strong interaction between the atom and the cavity enables single-photon operation, which is required for quantum gates and sources. Cold atoms, quantum dots, and color centers in crystals are among the systems that have shown single-photon operations, but they require significant physical infrastructure. Atomic vapors, on the other hand, require limited experimental infrastructure and are hence much easier to deploy outside a laboratory, but they consist of an ensemble of moving atoms that results in short interaction times involving multiple atoms, which can hamper quantum operations. A solution to this issue can be found in nanophotonic cavities, where the optical mode is confined to a small volume and light-matter interaction is enhanced, so that fast single-atom, single-photon operations are enabled. In this work, we study the interaction of an atomically clad microring resonator (ACMRR) with different-sized ensembles of Rb atoms. We demonstrate strong coupling between an ensemble of ≈50 atoms interacting with a high quality factor ( Q =4.3×10 5 ) ACMRR, yielding a many-atom cooperativity C =(5.5±0.3). We continue to observe signatures of atom-photon interaction for a few (<3) atoms, for which we observe saturation at the level of a few intracavity photons. Further development of our platform, which includes integrated thermo-optic heaters to enable cavity tuning and stabilization, should enable the observation of interactions between single photons and single atoms.
The interaction of light with matter is at the heart of quantum optics, which itself enables insight into the fundamental aspects of quantum mechanics. First experimental access to this research field has been realized by coupling atoms to light. Here, the transition between discrete energy states of the atom is associated with the absorption and emission of a photon, a single quantum of the electromagnetic field. As a central aspect of quantum optics, the light-emitter interaction can be significantly enhanced by placing the emitter in optical cavity that is on resonance with the emitter. In recent years, this has led to a rapidly evolving research field known as cavity quantum electrodynamics (CQED). In CQED two different regimes are distinguished: the strong and the weak coupling regimes. In the strong coupling regime, the emitted photon is reflected from the cavity mirrors and eventually reabsorbed by the emitter. In contrast, the weak coupling regime describes the irreversible emission, where the photon leaks out of the cavity before it can be reabsorbed. Both the weak and strong coupling regimes enabled fundamental experiments for a better understanding of quantum optical phenomena. \n \n \n \nCQED grants access to the quantum world and hence offers potentially revolutionizing applications, particularly in the field of quantum information processing. A central aspect for the successful implementation of quantum applications is the system's scalability. Unfortunately, placing atoms deterministically inside a cavity remains technologically elaborate and hence minimizes the prospect of scaling a atom-CQED system. \n \nA possibility to address this issue is to implement CQED in the solid state, where sophisticated fabrication strategies allow miniaturization and scalability of the system. Particularly the development of self-assembled quantum dots (QD) in semiconductors represent a promising route. QDs can be considered as artificial atoms that mimic the atomic two-level system. These structures interact strongly with light and therefore have the potential for replacing atoms in CQED. As a central advantage, QDs are naturally trapped, which greatly simplifies the deterministic incorporation into the cavity. \n \nIn recent years, many efforts have been made to couple self-assembled QDs to microcavities. Generally, the successful implementation of CQED requires a cavity with a high quality factor Q and a low mode volume. In a majority of the approaches, the high Q/small mode volume cavities were monolithically defined around the QD, embedding the QD at a fixed position inside the cavity. Both the weak and strong coupling regimes have been reached with these systems. However, for future applications they suffer from several disadvantages. The fixed position of the QD inside the cavity minimizes the prospects for spectral tunability and spatial positioning the QD inside the cavity. Furthermore, prospects for further increasing of the cavity Q-factor and minimization of the mode volume remain limited in these systems. \n \nIn this thesis the mentioned disadvantages are addressed by developing a fully tunable miniaturized Fabry-Pérot microcavity with low mode volume. The design enables both spatial positioning of the emitter inside the cavity and spectral tunability. Successful coupling of a single QD to the microcavity is demonstrated including the strong coupling regime. Further a new approach to decrease the cavity mode volume is presented, where we demonstrate weak coupling is achieved
Techniques to controllably interface atoms with quantum optical fields form the basis for many applications in quantum information science. For example, photons are convenient to relay information over large quantum networks, while atoms naturally are physical systems that can process and store this information. Thus far, the available techniques to efficiently couple single photons with atomic media fall into one of the following, mostly independent, categories: i) cavity quantum electrodynamics (QED), where atomic interactions with light are enhanced via a high-finesse cavity, ii) coherent coupling with atomic ensembles exhibiting large optical depths, and iii) the use of fields tightly focused to dimensions smaller than or approaching the scattering cross-section of a single atom. Although remarkable achievements have been made with all of these approaches, a robust, scalable technique remains elusive. Recently, several groups have successfully demonstrated that cold atoms can be trapped near and interfaced with nanophotonic systems, such as hollow-core photonic crystal fibers [1] and tapered nanofibers [2–4]. The traps are well-characterized [2, 3, 5], and the nearly diffraction-limited transverse confinement of optical fields enables ∼ 10% coupling efficiency of a single atom to the fiber [2, 3]. This has already led to remarkable observations of strong light-matter interactions using relatively few atoms and low powers [1]. It has also been proposed that such techniques can be extended to highly configurable photonic crystal waveguides [6]. Together, these efforts raise the intriguing possibility for future nanophotonic systems with tremendous figures of merit, wherein atom-light interactions can be tailored nearly at will. Here, we discuss recent efforts to develop novel techniques to realize strong, controllable atom-photon and photon-photon interactions, which take full advantage of the parameter space afforded by nanophotonic interfaces and are not based upon the extension of existing techniques. As a specific example, we discuss a protocol to achieve “all-atomic” cavity QED [7], as briefly described below. First, we show that although the single-atom coupling to guided modes of a nanophotonic waveguide might be relatively weak, there exist collective modes of a trapped atomic ensemble whose coupling to light is enhanced by the square root of the atom number, √ NA. While collective effects are generally well-known, special consequences emerge in the nanofiber system when the atoms are trapped in a lattice. In particular, collective effects cause such a lattice to act as a near-perfect mirror for an incident field close to resonance. In analogy to cavity QED, we then demonstrate that two sets of atomic mirrors can form an effective cavity, which can greatly enhance the coupling of a single, specially chosen “impurity” atom (or a few impurity atoms) positioned inside. We introduce a novel quantum spin model to describe the atom-light coupling, which allows one to exactly map the atom-nanofiber interface onto the simple and elegant Jaynes-Cummings model of cavity QED [8]. A unique feature of our atomic mirrors compared to conventional cavities is that they have long relaxation times and are highly dispersive. Remarkably, even with very low mirror finesse (F ∼ 10 2 ), this property allows one to attain the “strong coupling” regime of cavity QED, where vacuum Rabi oscillations [9–12] occur between an excited impurity atom and a single “photon” stored in the cavity (or more precisely, in the atomic mirrors). Furthermore, as quantum mechanical objects, these atom mirrors can be used to store quantum information and transfer this information into propagating waveguide modes. These various features can be combined to realize all of the building blocks for scalable quantum information processing.
Cavity quantum electrodynamics (QED), the system of a single atom interacting with a single mode of a high finesse optical resonator, has tremendous potential for use in quantum logic, quantum information processing, and in enabling observation of quantum mechanical effects in the laboratory. The work of this thesis demonstrates a number of steps toward realizing these goals, by employing an experimental system with the strongest atom-field coupling achieved to date in optical cavity QED. The effects of strong coupling in cavity QED are studied for single cold atoms measured one at a time, in real time. The passage of single atoms through the cavity is employed to map out the frequency response of the system, and to demonstrate that quantum rather than semiclassical theory provides the correct theoretical model. The mechanical effects of strong coupling on single atoms are explored, these experiments demonstrating the first trapping of single atoms with single photons. Additionally, strong coupling enables high signal-to-noise ratio for monitoring atomic position at single photon field strengths; this capability is employed to investigate the motion of atoms trapped within the cavity. The transmitted cavity field is used to reconstruct the trajectories of single atoms, thereby realizing a new form of microscopy - the Atom-Cavity Microscope. Technical developments necessary to create the cavities used in this experiment are detailed. Ideas for future extensions to the experiment are proposed; a zero light-shift dipole force trap, and measurement of photon statistics of a single strongly coupled atom (which realizes a photon blockade device) are discussed.