In quantum chemistry, one of the most important challenges is the static correlation problem when solving the electronic Schr\"odinger equation for molecules in the Born--Oppenheimer approximation. In this article, we analyze the tailored coupled-cluster method (TCC), one particular and promising method for treating molecular electronic-structure problems with static correlation. The TCC method combines the single-reference coupled-cluster (CC) approach with an approximate reference calculation in a subspace [complete active space (CAS)] of the considered Hilbert space that covers the static correlation. A one-particle spectral gap assumption is introduced, separating the CAS from the remaining Hilbert space. This replaces the nonexisting or nearly nonexisting gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital usually encountered in standard single-reference quantum chemistry. The analysis covers, in particular, CC methods tailored by tensor-network states (TNS-TCC methods). The problem is formulated in a nonlinear functional analysis framework, and, under certain conditions such as the aforementioned gap, local uniqueness and existence are proved using Zarantonello's lemma. From the Aubin--Nitsche-duality method, a quadratic error bound valid for TNS-TCC methods is derived, e.g., for linear-tensor-network TCC schemes using the density matrix renormalization group method.
In quantum chemistry, one of the most important challenges is the static correlation problem when solving the electronic Schr"odinger equation for molecules in the Born--Oppenheimer approximation. In this article, we analyze the tailored coupled-cluster method (TCC), one particular and promising method for treating molecular electronic-structure problems with static correlation. The TCC method combines the single-reference coupled-cluster (CC) approach with an approximate reference calculation in a subspace [complete active space (CAS)] of the considered Hilbert space that covers the static correlation. A one-particle spectral gap assumption is introduced, separating the CAS from the remaining Hilbert space. This replaces the nonexisting or nearly nonexisting gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital usually encountered in standard single-reference quantum chemistry. The analysis covers, in particular, CC methods tailored by tensor-network states (TNS-TCC methods). The problem is formulated in a nonlinear functional analysis framework, and, under certain conditions such as the aforementioned gap, local uniqueness and existence are proved using Zarantonello's lemma. From the Aubin--Nitsche-duality method, a quadratic error bound valid for TNS-TCC methods is derived, e.g., for linear-tensor-network TCC schemes using the density matrix renormalization group method.
In quantum chemistry, one of the most important challenges is the static correlation problem when solving the electronic Schrödinger equation for molecules in the Born--Oppenheimer approximation. In this article, we analyze the tailored coupled-cluster method (TCC), one particular and promising method for treating molecular electronic-structure problems with static correlation. The TCC method combines the single-reference coupled-cluster (CC) approach with an approximate reference calculation in a subspace (complete active space (CAS)) of the considered Hilbert space that covers the static correlation. A one-particle spectral gap assumption is introduced, separating the CAS from the remaining Hilbert space. This replaces the nonexisting or nearly nonexisting gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital usually encountered in standard single-reference quantum chemistry. The analysis covers, in particular, CC methods tailored by tensor-network states (TNS-TCC methods). The problem is formulated in a nonlinear functional analysis framework, and, under certain conditions such as the aforementioned gap, local uniqueness and existence are proved using Zarantonello's lemma. From the Aubin--Nitsche-duality method, a quadratic error bound valid for TNS-TCC methods is derived, e.g., for linear-tensor-network TCC schemes using the density matrix renormalization group method.
We present the quantum-selected configuration interaction-tailored coupled-cluster (QSCI-TCC) method, a hybrid quantum-classical scheme that tailors coupled-cluster (CC) theory with a quantum-selected configuration interaction (QSCI) wave function. QSCI provides a scalable, shot-efficient approach to reconstructing the many-electron state prepared on quantum hardware on a classical computer. The resulting active-space CI coefficients, which are free from additive shot noise, are mapped to fixed cluster amplitudes within the tailored coupled-cluster framework, after which a conventional CC calculation optimizes the remaining amplitudes. This workflow embeds static (strong) correlation from the quantum device and subsequently recovers dynamical (weak) correlation, yielding a balanced description of both. The method is classically simulated and applied to the simultaneous O-H bond dissociation in H2O and the triple-bond dissociation in N2. QSCI-TCC and its perturbative-triples variant, QSCI-TCC(T), provide accurate results even where CCSD or CCSD(T) begin to break down. Shot-count tests for the N2 (6e, 6o) active space demonstrate that, with the (c) correction, chemically sufficient precision (≤1 kcal/mol) is achieved with only 1.0×105 shots in the strongly correlated regime (r=2.2 Å) -- an order of magnitude fewer than required by an earlier matchgate-shadows implementation [J. Chem. Theory Comput., 20, 5068 (2024)]. By pairing resource-efficient quantum sampling with the CC theory, QSCI-TCC provides a promising pathway to quantum-chemical calculations of classically intractable systems.
The central problem in the modern electronic structure theory is the calculation of cor- relation energy, possibly by an approach that would account for both static and dynamic correlation in an efficient, balanced and accurate way. In this thesis, I present a collection of methods that combine the effective treatment of dynamic correlation by the coupled cluster theory with density matrix renormalization group, a well-established technique for calculations of strongly correlated systems. The connection between them is achieved via the tailored coupled clusters (TCC) ansatz, which conveniently does not impose any ad- ditional computational costs. After the successful initial assessment, we developed more efficient implementations of these methods by employing the local approaches based on pair natural orbitals. This way, we extended the range of possible applications to larger systems with thousands of basis functions. To assess the accuracy of TCC as well as its local counterparts, we performed a variety of benchmark calculations ranging from small, yet challenging systems such as the nitrogen molecule or tetramethyleneethane diradical, to larger molecules like oxo-Mn(Salen) or Fe(II)-porphyrin model. 1
In the past decade, the quantum chemical version of the density matrix renormalization group method has established itself as the method of choice for strongly correlated molecular systems. However, despite its favorable scaling, in practice, it is not suitable for computations of dynamic correlation. Several approaches to include that in post-DMRG methods exist; in our group, we focused on the tailored coupled cluster (TCC) approach. This method works well in many situations; however, in exactly degenerate cases (with two or more determinants of equal weight), it exhibits a bias toward the reference determinant representing the Fermi vacuum. Although sometimes it is possible to use a compensation scheme to avoid this bias for energy differences, it is certainly a drawback. In order to overcome this bias of the TCC method, we have developed a Hilbert-space multireference version of tailored CC, which can treat several determinants on an equal footing. We have implemented and compared the performance of three Hilbert-space multireference coupled cluster (MRCC) variants-the state universal one and the Brillouin-Wigner and Mukherjee's state specific ones. We have assessed these approaches on the cyclobutadiene and tetramethyleneethane molecules, which are both diradicals with exactly degenerate determinants at a certain geometry. We have also investigated the sensitivity of the results on the orbital rotation of the highest occupied and lowest unoccupied molecular orbital (HOMO-LUMO) pair, as it is well known that Hilbert-space MRCC methods are not invariant to such transformations.
In this article, we investigate the numerical and theoretical aspects of the coupled-cluster method tailored by matrix-product states. We investigate formal properties of the used method, such as energy size consistency and the equivalence of linked and unlinked formulation. The existing mathematical analysis is here elaborated in a quantum chemical framework. In particular, we highlight the use of what we have defined as a complete active space-external space gap describing the basis splitting between the complete active space and the external part generalizing the concept of a HOMO-LUMO gap. Furthermore, the behavior of the energy error for an optimal basis splitting, i.e., an active space choice minimizing the density matrix renormalization group-tailored coupled-cluster singles doubles error, is discussed. We show numerical investigations on the robustness with respect to the bond dimensions of the single orbital entropy and the mutual information, which are quantities that are used to choose a complete active space. Moreover, the dependence of the ground-state energy error on the complete active space has been analyzed numerically in order to find an optimal split between the complete active space and external space by minimizing the density matrix renormalization group-tailored coupled-cluster error.
Perhaps the most important approximations to the electronic structure problem in quantum chemistry are those based on coupled cluster and density functional theories. Coupled cluster theory has been called the ``gold standard'' of quantum chemistry due to the high accuracy that it achieves for weakly correlated systems. Kohn--Sham density functionals based on semilocal approximations are, without a doubt, the most widely used methods in chemistry and material science because of their high accuracy/cost ratio. The root of the success of coupled cluster and density functionals is their ability to efficiently describe the dynamic part of the electron correlation. However, both traditional coupled cluster and density functional approximations may fail catastrophically when substantial static correlation is present. This severely limits the applicability of these methods to a plethora of important chemical and physical problems such as, e.g., the description of bond breaking, transition states, transition metal-, lanthanide- and actinide-containing compounds, and superconductivity. In an attempt to tackle this problem, nonstandard (single-reference) coupled cluster-based techniques that aim to describe static correlation have been recently developed: pair coupled cluster doubles (pCCD) and singlet-paired coupled cluster doubles (CCD0). The ability to describe static correlation in pCCD and CCD0 comes, however, at the expense of important amounts of dynamic correlation so that the high accuracy of standard coupled cluster becomes unattainable. Thus, the reliable and efficient description of static and dynamic correlation in a simultaneous manner remains an open problem for quantum chemistry and many-body theory in general. In this thesis, different ways to combine pCCD and CCD0 with density functionals in order to describe static and dynamic correlation simultaneously (and efficiently) are explored. The combination of wavefunction and density functional methods has a long history in quantum chemistry (practical implementations have appeared in the literature since the 1970s). However, this kind of techniques have not achieved widespread use due to problems such as double counting of correlation and the symmetry dilemma---the fact that wavefunction methods respect the symmetries of Hamiltonian, while modern functionals are designed to work with broken symmetry densities. Here, particular mathematical features of pCCD and CCD0 are exploited to avoid these problems in an efficient manner. The two resulting families of approximations, denoted as pCCD+DFT and CCD0+DFT, are shown to be able to describe static and dynamic correlation in standard benchmark calculations. Furthermore, it is also shown that CCD0+DFT lends itself to combination with correlation from the direct random phase approximation (dRPA). Inclusion of dRPA in the long-range via the technique of range-separation allows for the description of dispersion correlation, the remaining part of the correlation. Thus, when combined with the dRPA, CCD0+DFT can account for all three-types of electron correlation that are necessary to accurately describe molecular systems. Lastly, applications of CCD0+DFT to actinide chemistry are considered in this work. The accuracy of CCD0+DFT for predicting equilibrium geometries and vibrational frequencies of actinide molecules and ions is assessed and compared to that of well-established quantum chemical methods. For this purpose, the f0 actinyl series (UO22+, NpO23+, PuO24+), the isoelectronic NUN, and Thorium (ThO, ThO2+) and Nobelium (NoO, NoO2) oxides are studied. It is shown that the CCD0+DFT description of these species agrees with available experimental data and is comparable with the results given by the highest-level calculations that are possible for such heavy compounds while being, at least, an order of magnitude lower in computational cost.