Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Nanomaterials

Design of an on-Chip Room Temperature Group-IV Quantum Photonic Chem/Bio Interferometric Sensor Based on Parity Detection

Francesco De Leonardis, Richard A. Soref, Vittorio M. N. Passaro

Published Oct 7, 2020• 0 citations
Publisher

Abstract

We propose and analyze three Si-based room-temperature strip-guided “manufacturable” integrated quantum photonic chem/bio sensor chips operating at wavelengths of 1550 nm, 1330 nm, and 640 nm, respectively. We propose design rules that will achieve super-sensitivity (above the classical limit) by means of mixing between states of coherent light and single-mode squeezed-light. The silicon-on-insulator (SOI), silicon-on-sapphire (SOS), and silicon nitride-on-SiO2-on Si (SiN) platforms have been investigated. Each chip is comprised of photonic building blocks: a race-track resonator, a pump filter, an integrated Mach-Zehnder interferometric chem/bio sensor, and a photonic circuit to perform parity measurements, where our homodyne measurement circuit avoids the use of single-photon-counting detectors and utilizes instead conventional photodetectors. A combination of super-sensitivity with super-resolution is predicted for all three platforms to be used for chem/bio sensing applications.

DOI
10.3390/nano10101984

Related papers

Chem/bio sensing with non-classical light and integrated photonics

Julian Haas, Mario Schwartz, Ulrich Rengstl +3 more

Modern quantum technology currently experiences extensive advances in applicability in communications, cryptography, computing, metrology and lithography. Harnessing this technology platform for chem/bio sensing scenarios is an appealing opportunity enabling ultra-sensitive detection schemes. This is further facilliated by the progress in fabrication, miniaturization and integration of visible and infrared quantum photonics. Especially, the combination of efficient single-photon sources together with waveguiding/sensing structures, serving as active optical transducer, as well as advanced detector materials is promising integrated quantum photonic chem/bio sensors. Besides the intrinsic molecular selectivity and non-destructive character of visible and infrared light based sensing schemes, chem/bio sensors taking advantage of non-classical light sources promise sensitivities beyond the standard quantum limit. In the present review, recent achievements towards on-chip chem/bio quantum photonic sensing platforms based on N00N states are discussed along with appropriate recognition chemistries, facilitating the detection of relevant (bio)analytes at ultra-trace concentration levels. After evaluating recent developments in this field, a perspective for a potentially promising sensor testbed is discussed for reaching integrated quantum sensing with two fiber-coupled GaAs chips together with semiconductor quantum dots serving as single-photon sources.

The Analyst•Dec 6, 2017•25 citations

Generation and detection of squeezed light on a single silicon photonic chip

Oliver M. Green, Bethany Puzio, Rowan A. Hoggarth +5 more

The ability to generate and detect quantum states of light on a single integrated photonic device is essential to scale quantum photonics into useful quantum technologies. Integrating the required capabilities into complementary-metal-oxide-semiconductor compatible monolithic chips can reduce cost and unlock new functionality through miniaturisation. In this work we demonstrate a single silicon-on-insulator photonic integrated circuit for the monolithic generation and detection of quantum light on a commercially available platform that operates entirely at room temperature. Specifically, we leverage spontaneous four-wave mixing in silicon waveguides to produce squeezed light which is subsequently detected by photodiodes operating in a pulsed homodyne detector configuration on the same chip as the source. We directly measure $0.25(1)$ dB of squeezing, including contributions from waveguide propagation loss and detection inefficiency, and include a detailed analysis of the impact of nonlinear loss on the squeezing levels achievable using this platform.

quant-pharXiv:2607.15461•Jul 20, 2026•0 citations

Toward a Room-Temperature Fully-Integrated Photonic Quantum Simulator

Matteo Sanna, Alessio Baldazzi, Nicolò Broseghini +7 more

Quantum simulators are controllable quantum sys-tems that can be used to reproduce the states and the dynamics of other quantum systems object of study. The ease to manipulate single photons on a chip at room temperature without deco-herence issues has made integrated photonics one of the most viable technologies for processing quantum information. Many demonstrations have been reported over the past fifteen years, included the simulation of complex and many-body interactions. Combining quantum light sources, reconfigurable circuits and high-efficiency single-photon detectors together on a single chip is an extremely challenging goal, still taking a lot of scientific and technological efforts worldwide. Here, we report emergent results along this direction. On a silicon nitride photonic platform, we separately show a source of photon pairs based on a microring, high-performance wavelength filters based on Mach-Zehnder in-terferometers and silicon single-photon avalanche diodes directly coupled to the photonic waveguides. The demonstration of these fundamental building blocks represents a starting point for the realization of a photonic quantum simulator operated entirely on a single chip working at room temperature.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 15, 2024•0 citations

On-Chip Group-IV Heisenberg-Limited Sagnac Interferometric Gyroscope at Room Temperature

Francesco De Leonardis, Richard A. Soref, Martino De Carlo +1 more

A room-temperature strip-guided "manufacturable" Silicon-on-Insulator (SOI)/GeSn integrated-photonics quantum-gyroscope chip operating at 1550 nm is proposed and analysed. We demonstrate how the entangled photons generated in Si Spontaneous Four Wave Mixing (SFWM) can be used to improve the resolution of a Sagnac interferometric gyroscope. We propose different integrated architectures based on degenerate and non-degenerate SFWM. The chip comprises several beam splitters, two SFWM entangled photon sources, a pump filter, integrated Mach-Zehnder interferometric gyro, and an array of waveguide coupled GeSn/Ge/Si single-photon avalanche detectors. The laser pumped SWFM sources generate the signal-idler pairs, which, in turn, are used to measure the two-photon, four-photon, and higher order coincidences, resulting in an increasing of the gyro resolution by a factor of two and four, with respect to the classical approach.

Sensors•Jun 19, 2020•5 citations

High quantum-efficiency photon-number-resolving detector for photonic on-chip information processing

Brice Calkins, Paolo L. Mennea, Adriana E. Lita +11 more

The integrated optical circuit is a promising architecture for the realization of complex quantum optical states and information networks. One element that is required for many of these applications is a high-efficiency photon detector capable of photon-number discrimination. We present an integrated photonic system in the telecom band at 1550 nm based on UV-written silica-on-silicon waveguides and modified transition-edge sensors capable of number resolution and over 40 % efficiency. Exploiting the mode transmission failure of these devices, we multiplex three detectors in series to demonstrate a combined 79 % ± 2 % detection efficiency with a single pass, and 88 % ± 3 % at the operating wavelength of an on-chip terminal reflection grating. Furthermore, our optical measurements clearly demonstrate no significant unexplained loss in this system due to scattering or reflections. This waveguide and detector design therefore allows the placement of number-resolving single-photon detectors of predictable efficiency at arbitrary locations within a photonic circuit - a capability that offers great potential for many quantum optical applications.

arXiv:1305.6627•Optics Express•Sep 18, 2013•119 citations

Enabling quantum sensors with integrated photonics

Neal Solmeyer, Argyrios T. Dellis, Javad Dowran +8 more

Quantum sensors have the potential to transform numerous applications across a broad range of fields from precision timing to electro-magnetic field sensing, medical imaging, gravimetry, to inertial sensing. Despite promising performances in laboratory experiments, quantum sensors have yet to be widely deployed in real-world applications at large scale. The large-scale adoption of quantum sensors has been hampered by the high SWaP-c and their sensitivity to environmental factors. Photonic integrated circuits have emerged as an enabling technology for quantum sensors to reduce SWaP-c, enhance fieldability, and add enhanced functionality. Honeywell has developed state-of-the-art capabilities in Silicon Nitride (SiN) and other photonics platforms, to enable low-swap quantum sensors ranging from atomic clocks, Rydberg electromagnetic field sensors, and NV diamond magnetometers among others. In this talk we will give an overview of how Honeywell is using photonic integrated circuits to enable a variety of quantum sensing and timing technologies for aerospace applications. Low-loss SiN waveguides can be used to deliver light to the quantum system in a compact form factor, produce high Q-optical cavities for narrow-linewidth lasers, tunably filter frequency components, or to generate optical combs. Mode-matched edge couplers can efficiently transfer light from fiberto- chip or chip-to-chip. Other photonic platforms such as diamond or thin-film lithium niobate (TFLN) can be integrated with a SiN platform in either hybrid or heterogenous configurations to enable quantum magnetometry and laser frequency tuning or modulation in ultra-compact form factors. We will discuss the advantages and remaining challenges for using photonic integrated circuits to advance quantum sensors to the point where they can be adopted in mainstream applications.

Quantum Sensing and Nano Electronics and Photonics•Mar 21, 2025•0 citations
We propose and analyze three Si-based room-temperature strip-guided “manufacturable” integrated quantum photonic chem/bio sensor chips operating at wavelengths of 1550 nm, 1330 nm, and 640 nm, respectively. We propose design rules that will achieve super-sensitivity (above the classical limit) by means of mixing between states of coherent light and single-mode squeezed-light. The silicon-on-insulator (SOI), silicon-on-sapphire (SOS), and silicon nitride-on-SiO2-on Si (SiN) platforms have been investigated. Each chip is comprised of photonic building blocks: a race-track resonator, a pump filter, an integrated Mach-Zehnder interferometric chem/bio sensor, and a photonic circuit to perform parity measurements, where our homodyne measurement circuit avoids the use of single-photon-counting detectors and utilizes instead conventional photodetectors. A combination of super-sensitivity with super-resolution is predicted for all three platforms to be used for chem/bio sensing applications.
Modern quantum technology currently experiences extensive advances in applicability in communications, cryptography, computing, metrology and lithography. Harnessing this technology platform for chem/bio sensing scenarios is an appealing opportunity enabling ultra-sensitive detection schemes. This is further facilliated by the progress in fabrication, miniaturization and integration of visible and infrared quantum photonics. Especially, the combination of efficient single-photon sources together with waveguiding/sensing structures, serving as active optical transducer, as well as advanced detector materials is promising integrated quantum photonic chem/bio sensors. Besides the intrinsic molecular selectivity and non-destructive character of visible and infrared light based sensing schemes, chem/bio sensors taking advantage of non-classical light sources promise sensitivities beyond the standard quantum limit. In the present review, recent achievements towards on-chip chem/bio quantum photonic sensing platforms based on N00N states are discussed along with appropriate recognition chemistries, facilitating the detection of relevant (bio)analytes at ultra-trace concentration levels. After evaluating recent developments in this field, a perspective for a potentially promising sensor testbed is discussed for reaching integrated quantum sensing with two fiber-coupled GaAs chips together with semiconductor quantum dots serving as single-photon sources.
The ability to generate and detect quantum states of light on a single integrated photonic device is essential to scale quantum photonics into useful quantum technologies. Integrating the required capabilities into complementary-metal-oxide-semiconductor compatible monolithic chips can reduce cost and unlock new functionality through miniaturisation. In this work we demonstrate a single silicon-on-insulator photonic integrated circuit for the monolithic generation and detection of quantum light on a commercially available platform that operates entirely at room temperature. Specifically, we leverage spontaneous four-wave mixing in silicon waveguides to produce squeezed light which is subsequently detected by photodiodes operating in a pulsed homodyne detector configuration on the same chip as the source. We directly measure 0.25(1)0.25(1)0.25(1) dB of squeezing, including contributions from waveguide propagation loss and detection inefficiency, and include a detailed analysis of the impact of nonlinear loss on the squeezing levels achievable using this platform.
Quantum simulators are controllable quantum sys-tems that can be used to reproduce the states and the dynamics of other quantum systems object of study. The ease to manipulate single photons on a chip at room temperature without deco-herence issues has made integrated photonics one of the most viable technologies for processing quantum information. Many demonstrations have been reported over the past fifteen years, included the simulation of complex and many-body interactions. Combining quantum light sources, reconfigurable circuits and high-efficiency single-photon detectors together on a single chip is an extremely challenging goal, still taking a lot of scientific and technological efforts worldwide. Here, we report emergent results along this direction. On a silicon nitride photonic platform, we separately show a source of photon pairs based on a microring, high-performance wavelength filters based on Mach-Zehnder in-terferometers and silicon single-photon avalanche diodes directly coupled to the photonic waveguides. The demonstration of these fundamental building blocks represents a starting point for the realization of a photonic quantum simulator operated entirely on a single chip working at room temperature.
A room-temperature strip-guided "manufacturable" Silicon-on-Insulator (SOI)/GeSn integrated-photonics quantum-gyroscope chip operating at 1550 nm is proposed and analysed. We demonstrate how the entangled photons generated in Si Spontaneous Four Wave Mixing (SFWM) can be used to improve the resolution of a Sagnac interferometric gyroscope. We propose different integrated architectures based on degenerate and non-degenerate SFWM. The chip comprises several beam splitters, two SFWM entangled photon sources, a pump filter, integrated Mach-Zehnder interferometric gyro, and an array of waveguide coupled GeSn/Ge/Si single-photon avalanche detectors. The laser pumped SWFM sources generate the signal-idler pairs, which, in turn, are used to measure the two-photon, four-photon, and higher order coincidences, resulting in an increasing of the gyro resolution by a factor of two and four, with respect to the classical approach.
The integrated optical circuit is a promising architecture for the realization of complex quantum optical states and information networks. One element that is required for many of these applications is a high-efficiency photon detector capable of photon-number discrimination. We present an integrated photonic system in the telecom band at 1550 nm based on UV-written silica-on-silicon waveguides and modified transition-edge sensors capable of number resolution and over 40 % efficiency. Exploiting the mode transmission failure of these devices, we multiplex three detectors in series to demonstrate a combined 79 % ± 2 % detection efficiency with a single pass, and 88 % ± 3 % at the operating wavelength of an on-chip terminal reflection grating. Furthermore, our optical measurements clearly demonstrate no significant unexplained loss in this system due to scattering or reflections. This waveguide and detector design therefore allows the placement of number-resolving single-photon detectors of predictable efficiency at arbitrary locations within a photonic circuit - a capability that offers great potential for many quantum optical applications.
Quantum sensors have the potential to transform numerous applications across a broad range of fields from precision timing to electro-magnetic field sensing, medical imaging, gravimetry, to inertial sensing. Despite promising performances in laboratory experiments, quantum sensors have yet to be widely deployed in real-world applications at large scale. The large-scale adoption of quantum sensors has been hampered by the high SWaP-c and their sensitivity to environmental factors. Photonic integrated circuits have emerged as an enabling technology for quantum sensors to reduce SWaP-c, enhance fieldability, and add enhanced functionality. Honeywell has developed state-of-the-art capabilities in Silicon Nitride (SiN) and other photonics platforms, to enable low-swap quantum sensors ranging from atomic clocks, Rydberg electromagnetic field sensors, and NV diamond magnetometers among others. In this talk we will give an overview of how Honeywell is using photonic integrated circuits to enable a variety of quantum sensing and timing technologies for aerospace applications. Low-loss SiN waveguides can be used to deliver light to the quantum system in a compact form factor, produce high Q-optical cavities for narrow-linewidth lasers, tunably filter frequency components, or to generate optical combs. Mode-matched edge couplers can efficiently transfer light from fiberto- chip or chip-to-chip. Other photonic platforms such as diamond or thin-film lithium niobate (TFLN) can be integrated with a SiN platform in either hybrid or heterogenous configurations to enable quantum magnetometry and laser frequency tuning or modulation in ultra-compact form factors. We will discuss the advantages and remaining challenges for using photonic integrated circuits to advance quantum sensors to the point where they can be adopted in mainstream applications.