Phase estimation of signals below noise is a main challenge in optical quantum communication receivers. Heterodyne detection at a SNR of less than -20 dB with machine learning based optimized carrier phase estimation is demonstrated.
In the context of optical signal processing, quantum and quantum-inspired machine learning algorithms have massive potential for deployment. One of the applications is in error correction protocols for the received noisy signals. In some scenarios, non-linear and unknown errors can lead to noise that bypasses linear error correction protocols that optical receivers generally implement. In those cases, machine learning techniques are used to recover the transmitted signal from the received signal through various estimation procedures. Since quantum machine learning algorithms promise advantage over classical algorithms, we expect that optical signal processing can benefit from these advantages. In this review, we survey several proposed quantum and quantum-inspired machine learning algorithms and their applicability with current technology to optical signal processing.
Abstract Accuracy in discriminating between different received coherent signals is integral to the operation of many free-space communications protocols, and is often difficult when the receiver measures a weak signal. Here we design an optical communication scheme that uses balanced homodyne detection in combination with an unsupervised generative machine learning and convolutional neural network (CNN) system, and demonstrate its efficacy in a realistic simulated coherent quadrature phase shift keyed (QPSK) communications system. Additionally, we design the neural network system such that it autonomously learns to correct for the noise associated with a weak QPSK signal, which is distributed to the receiver prior to the implementation of the communications. We find that the scheme significantly reduces the overall error probability of the communications system, achieving the classical optimal limit. We anticipate that these results will allow for a significant enhancement of current classical and quantum coherent optical communications technologies.
Phase estimation has applications from quantum imaging to gravitational-wave detection. In areas such as biological-system sampling or quantum metrology, it is crucial to optimally acquire information from a very limited number of probes. To address this need, the authors describe and experimentally verify a machine-learning method for optimal adaptive single-photon phase estimation based on a small number of trials. This approach could be used to optimize quantum metrology protocols, and can be extended to general multiparameter scenarios.
After reviewing recent work on multiphoton direct detection and single-photon heterodyne detection, we examine the behavior of a multiphoton absorption heterodyne receiver. Expressions are obtained for the detector response, signal-to-noise ratio (SNR), and minimum detectable power for a number of cases of interest. Receiver performance is found to depend on the higher order correlation functions of the radiation field and on the local oscillator (LO) irradiance. Although performance similar to that of the single-photon heterodyne receiver can theoretically be achieved, practical problems would appear to make this difficult. A physical interpretation of the process in terms of the absorption of monochromatic and nonmonochromatic photons is given. The double-quantum case is treated in particular detail; the results of a preliminary experiment are presented and suggestions for future experiments are provided.