We present a compact optical delivery design for a 2D+ MOT which is used in conjunction with a magnetic assembly and a commercial vacuum piece to create a standardised cold atom source. The design provides a plug-and-play system, free of optical alignment, capable of producing an atomic flux of >1e9 atoms per second with <50mW of laser power. The dimensions of the system are 67mm x 67mm x 112mm (W x H x L), where such compactness is achieved through a fixed optical design, additive manufacturing techniques, and a novel beam expansion method which forms a multiply split cylindrical beam.
We present a compact optical delivery design for a 2D+ MOT which is used in conjunction with a magnetic assembly and a commercial vacuum piece to create a standardised cold atom source. The design provides a plug-and-play system, free of optical alignment, capable of producing an atomic flux of >1e9 atoms per second with <50mW of laser power. The dimensions of the system are 67mm x 67mm x 112mm (W x H x L), where such compactness is achieved through a fixed optical design, additive manufacturing techniques, and a novel beam expansion method which forms a multiply split cylindrical beam.
The creation of cold atoms underpins quantum sensing and precision metrology, computing, timekeeping, and fundamental science experiments. Miniaturizing the lasers and optical infrastructure, which occupy over 80% of the volume of these experiments, through photonic integration could improve robustness, reliability, and manufacturability while reducing cost and enabling portable space-based precision measurements and quantum tools for non-experts. Yet, there has been limited progress towards integration of the laser and optical infrastructure required to generate cold atoms onto a single chip. We demonstrate a photonic engine that generates, controls, and delivers precision light to create cold atoms in a rubidium 3-dimensional magneto-optical trap (3D-MOT). We integrate on a single chip two frequency-agile self-injection-locked lasers, laser frequency and intensity control, passive beam combining and splitting, signal monitoring, and high-efficiency beam delivery to a rubidium vapor cell. The integrated engine is shown to support multiple functions required for generating cold atoms including stable generation of low-noise cooling and repump light, frequency control for atom spectroscopy and stabilization, real-time laser monitoring, routing for laser offset locking, optical power modulation, and large-area three-beam delivery of 3 mW to the physics package. Fully electrically controlled, the engine enables sustained 3D-MOT operation, trapping more than 1 million atoms at an average temperature of 350 uK and supporting atom-number and temperature measurements. These results demonstrate the first single-chip integration of light generation, control, and delivery for cold-atom generation, offering a path toward smaller, more robust, and manufacturable cold-atom systems for applications including cold-atom clocks and sensors.
A compact cold atom beam source based on a multistage two-dimensional magneto-optical trap (MOT) has been demonstrated and characterized. The multiple-stage design greatly reduces the overall size of the source apparatus while providing a high flux of atoms. The cold atom beam was used to load a separate MOT in ultrahigh vacuum, and we obtained an actual trap loading rate of 1.5 x 109 atoms/s while using only 20 mW of total laser power for the source. The entire source apparatus, including optics, can fit into a 4 cm x 4 cm x 13 cm volume.
The ongoing drive to transfer quantum technologies from research laboratories to practical, portable devices requires the development of multiple key enabling technologies. The field of cold atoms, which includes high-precision metrology and quantum simulation, has various real-world applications including time-keeping and navigation. A crucial component in these systems is a cold-atom source that generates a flux of low-velocity atoms suitable for subsequent capture. A large flux enables fast repetition rates, high duty cycles, long measurement times, and resistance to long-term performance degradation with a good signal-to-noise ratio, all of which are essential to produce cold-atom devices and technologies that are capable of out-performing the classical alternatives. This thesis presents the design, fabrication and characterisation of a novel cold-atom source using a compact pyramidal magneto-optical trap (MOT) with a unique adjustable-aperture mechanism. This allowed an investigation of the dependence of the flux characteristics on the aperture size, a parameter space that has not previously been explored. The measurements showed a strong dependence of the flux on the aperture size, with a negligible flux below 0.4mm, then an approximately linear increase up to 1.0mm, at which point the relationship showed possible signs of saturation. Using 87Rb, a flux of 1.18×1010 atoms/s was produced using a 1.27mm aperture, for which the mean velocity of the atoms was 21.6(3) m/s with a FWHM of 11.2(2) m/s, and the FWHM divergence of the beam was 86(2) mrad. This is the highest recorded flux from a pyramid or 2D+-MOT source, and amongst the highest reported fluxes from any MOT sources, and avenues for improvement still remain. This work fulfils the aim of demonstrating a compact and robust cold-atom source generating a high flux of laser-cooled atoms for real-world quantum technology applications.
Abstract Cold atoms are important for precision atomic applications including timekeeping and sensing. The 3D magneto-optical trap (3D-MOT), used to produce cold atoms, will benefit from photonic integration to improve reliability and reduce size, weight, and cost. These traps require the delivery of multiple, large area, collimated laser beams to an atomic vacuum cell. Yet, to date, beam delivery using an integrated waveguide approach has remained elusive. Here we report the demonstration of a 87 Rb 3D-MOT using a fiber-coupled photonic integrated circuit to deliver all beams to cool and trap > 1 ×10 6 atoms to near 200 μK. The silicon nitride photonic circuit transforms fiber-coupled 780 nm cooling and repump light via waveguides to three mm-width non-diverging free-space cooling and repump beams directly to the rubidium cell. This planar, CMOS foundry-compatible integrated beam delivery is compatible with other components, such as lasers and modulators, promising system-on-chip solutions for cold atom applications.
In cold atom physics, the complexity of traditional magneto-optical trap system limits the use of their associated instruments for field applications in atomic physics, such as gravity mapping, space navigation and deep space exploration. This study introduces a novel compact MOT design that addresses these issues by simplifying the structure and reducing the size. The height of the unit is 0.7 m, the volume is 6.3×10−2m3 and the mass is 11.32 kg. The new design utilizes a single laser to generate the two different frequencies needed for laser cooling by internally splitting the beam, shifting the frequency and then combining them, effectively controlling both the cooling and repumping beams. The compact vacuum chamber optical path, in conjunction with the magnetic field, facilitates the capture of 87Rb atoms in an ultra-high vacuum environment. Experimental results demonstrate an atom loading rate of up to 1.79×10787Rb atoms per second, confirming the system’s effectiveness in capturing and cooling 87Rb atoms. This design provides a flexible and portable solution, offering valuable insights for the advancement of compact MOT and its applications in cold atom physics.
Magneto-optical traps (MOTs), indispensable to cold-atom-based quantum computing and quantum precision measurement, are increasingly desired in compact and stable form. Particularly, the six-beam 3D-MOT, distinguished by symmetric geometry and superior trapping performance, finds particularly broad applications. Conventional implementations, however, rely on complex and bulky free-space optics, hindering miniaturization, practical assembly, and long-term stability. Here, we demonstrate a compact six-beam 3D-MOT system that employs two multifunctional optical metasurface chips to implement the optical-field functionalities required for cooling and trapping atoms. By combining two metasurface chips and a vacuum cell, a photonic-integrated cell module (PICM) is implemented as the core assembly and the volume is only" 73*73*107 mm^3" . In success, 1.3 * 10^3 Rb atoms are trapped and cooled to the temperature of ~183 μK. It should be noticed that the laser beam is guided to the metasurface through optical fiber, thus such fully fiber-coupled architecture enables straightforward and stable operations. We believe that this work would pave a practical route toward compact and portable 3D-MOT.