Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Near 100% spectral-purity photons from reconfigurable micro-rings*

Pingyu Zhu, Yingwen Liu, Chao Wu, Shichuan Xue, Xinyao Yu, Qilin Zheng, Yang Wang, Xiaogang Qiang, Junjie Wu, Ping Xu

Published Sep 24, 2020• 5 citations
Publisher

Abstract

We propose an on-chip reconfigurable micro-ring to engineer the spectral-purity of photons. The micro-ring resonator is designed to be coupled by one or two asymmetric Mach–Zehnder interferometers and the coupling coefficients hence the quality-factors of the pump and the converted photons can be dynamically changed by the interferometer’s internal phase-shifter. We calculate the joint-spectrum function and obtain the spectral-purity of photons and Schmidt number under different phases. We show that it is a dynamical method to adjust the spectral-purity and can optimize the spectral-purity of photons up to near 100%. The condition for high-spectral-purity photons is ensured by the micro-ring itself, so it overcomes the trade-off between spectral purity and brightness in the traditional post-filtering method. This scheme is robust to fabrication variations and can be successfully applied in different fabrication labs and different materials. Such high-spectral-purity photons will be beneficial for quantum information processing like Boson sampling and other quantum algorithms.

DOI
10.1088/1674-1056/abbb28

Related papers

High-spectral-purity photon generation from a dual-interferometer-coupled silicon microring

Yingwen Liu, Chao Wu, Xiaowen Gu +8 more

We experimentally demonstrate a high-spectral-purity photon source by designing a dual-Mach–Zehnder-interferometer-coupled silicon ring resonator, wherein the linewidths of pump and signal (idler) resonances can be engineered independently. A high spectral purity of 95 % ± 1.5 % is obtained via a time-integrated g ( 2 ) correlation measurement, which exceeds the theoretical 93% bound of a traditional ring’s spontaneous four-wave-mixing photon source. This source also possesses high performance in other metrics including a measured coincidence of 9599 pairs/s and a preparation heralding efficiency of 52.4% at a relatively low pump power of 61 µW as well as high drop-to-through suppression of 20.2 dB. By overcoming the trade-off between spectral purity and brightness in the post-filtering way, such a method guarantees bright pure photons and will pave the way for development of on-chip quantum information processing with improved operation fidelity and efficiency.

Optics Letters•Dec 16, 2019•67 citations

Reconfigurable microring resonators for multipurpose quantum light sources

Yuxing Du, Yingwen Liu, Chao Wu +6 more

Abstract Microring resonators (MRRs) are extensively utilized in photonic chips for generating quantum light sources and enabling high-efficiency nonlinear frequency conversion. However, conventional microrings are typically optimized for a single specific function, limiting their versatility in multifunctional applications. In this work, we propose a reconfigurable microring resonator architecture designed to accommodate diverse application requirements. By integrating a cascaded Mach–Zehnder interferometer (MZI) as the microring coupler, the design enables independent control of the quality factors for pump, signal and idler photons through two tunable phase shifters. This capability allows for dynamic tuning and optimization of critical performance parameters, including photon-pair generation rate (PGR), spectral purity and single photon heralding efficiency (HE). The proposed structure is implemented on a silicon photonic chip, and experimental results exhibit a wide range of tunability for these parameters, with excellent agreement with theoretical predictions. This flexible and multi-functional design offers a promising pathway for high-performance, highly integrated on-chip quantum information processing systems.

Chinese Physics B•Apr 14, 2025•0 citations

Improving the spectral purity of single photons by a single-interferometer-coupled microring

Yang Wang, Pingyu Zhu, Shichuan Xue +4 more

We experimentally engineer a high-spectral-purity single-photon source using a single-interferometer-coupled silicon microring. By the reconfiguration of the interferometer, different coupling conditions can be obtained, corresponding to different quality factors for the pump and signal/idler. The ratio between the quality factor of the pump and signal/idler ranges from 0.29 to 2.57. By constructing the signal–idler joint spectral intensity, we intuitively demonstrate the spectral correlation of the signal and idler. As the ratio between the quality factor of the pump and signal/idler increases, the spectral correlation of the signal and idler decreases, i.e., the spectral purity of the signal/idler photons increases. Furthermore, time-integrated second-order correlation of the signal photons is measured, giving a value up to 94.95 ± 3.46%. Such high-spectral-purity photons will improve the visibility of quantum interference and facilitate the development of on-chip quantum information processing.

Chinese Physics B•Nov 4, 2021•0 citations

Chip-scale high spectral purity micro-ring photon-pair source based on dual-pulse control

Baojie Hou, Donghui Chen, Haoran Ma +10 more

Fully integrated high spectral purity photon-pair sources represent critical core components for scalable photonic quantum information processing systems. While micro-ring resonator based single-photon sources demonstrate superior integration capabilities, their spectral purity typically suffers from a theoretical upper bound below 92% in the absence of narrow-band spectral filtering, rendering it inadequate for advanced quantum applications. This work successfully implements an on-chip dual-pulse controlled photon pair generation architecture on a complementary metal oxide semiconductor (CMOS) compatible silicon photonic platform, achieving high spectral purity exceeding 98% by optimizing the beam splitting ratio and adjusting the relative time delay between the two pulses. Furthermore, to mitigate operating point drift in the micro-ring photon-pair generator induced by micro-heater current variations during testing, we developed a power control algorithm that locks the micro-ring resonance to the corresponding frequency of the shaped optical pulse, significantly improving long-term system stability.

Optics Express•Mar 12, 2026•1 citation

Study on the Performance of a Single Photon Source Based on a Silicon Micro-ring Resonator

Fan Yang

Recently, many researchers focus on the integration of single photon sources on an optical chip toward the realization of large-scale quantum information processing.Identical single photons are required to obtain good interference between photons for quantum information processing, for which high "spectral purity" of single photons is required.An appealing scheme is employing the spontaneous four-wave mixing (SFWM) in a silicon micro-ring resonator (MRR) because it allows us to generate high-purity photons without external spectral filters.However, the purity value is limited to 0.92 due to the dispersion property of an MRR We have developed a new scheme to further increase the spectral purity from an MRR by manipulating the spectral phase distribution of the pump pulse.Via exploring several strategies on the spectral phase modulation, we found that the purity of single photon can be increased up to approximately 0.96 breaking the conventional limitation of 0.92 in a standard MRR.We further explore the experimental feasibility of the scheme toward future implementation.

東北大学電通談話会記録•Mar 4, 2021•0 citations

Integrated photon sources for quantum information science applications

Paul M. Alsing, Dirk Englund, Neville A. Mogent +8 more

Ring resonators are used as photon pair sources by taking advantage of the materials second or third order non- linearities through the processes of spontaneous parametric downconversion and spontaneous four wave mixing respectively. Two materials of interest for these applications are silicon for the infrared and aluminum nitride for the ultraviolet through the infrared. When fabricated into ring type sources they are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of 96% but requiring a factor of ~10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as ~ 97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.

•Oct 5, 2017•1 citation
We propose an on-chip reconfigurable micro-ring to engineer the spectral-purity of photons. The micro-ring resonator is designed to be coupled by one or two asymmetric Mach–Zehnder interferometers and the coupling coefficients hence the quality-factors of the pump and the converted photons can be dynamically changed by the interferometer’s internal phase-shifter. We calculate the joint-spectrum function and obtain the spectral-purity of photons and Schmidt number under different phases. We show that it is a dynamical method to adjust the spectral-purity and can optimize the spectral-purity of photons up to near 100%. The condition for high-spectral-purity photons is ensured by the micro-ring itself, so it overcomes the trade-off between spectral purity and brightness in the traditional post-filtering method. This scheme is robust to fabrication variations and can be successfully applied in different fabrication labs and different materials. Such high-spectral-purity photons will be beneficial for quantum information processing like Boson sampling and other quantum algorithms.
We experimentally demonstrate a high-spectral-purity photon source by designing a dual-Mach–Zehnder-interferometer-coupled silicon ring resonator, wherein the linewidths of pump and signal (idler) resonances can be engineered independently. A high spectral purity of 95 % ± 1.5 % is obtained via a time-integrated g ( 2 ) correlation measurement, which exceeds the theoretical 93% bound of a traditional ring’s spontaneous four-wave-mixing photon source. This source also possesses high performance in other metrics including a measured coincidence of 9599 pairs/s and a preparation heralding efficiency of 52.4% at a relatively low pump power of 61 µW as well as high drop-to-through suppression of 20.2 dB. By overcoming the trade-off between spectral purity and brightness in the post-filtering way, such a method guarantees bright pure photons and will pave the way for development of on-chip quantum information processing with improved operation fidelity and efficiency.
Abstract Microring resonators (MRRs) are extensively utilized in photonic chips for generating quantum light sources and enabling high-efficiency nonlinear frequency conversion. However, conventional microrings are typically optimized for a single specific function, limiting their versatility in multifunctional applications. In this work, we propose a reconfigurable microring resonator architecture designed to accommodate diverse application requirements. By integrating a cascaded Mach–Zehnder interferometer (MZI) as the microring coupler, the design enables independent control of the quality factors for pump, signal and idler photons through two tunable phase shifters. This capability allows for dynamic tuning and optimization of critical performance parameters, including photon-pair generation rate (PGR), spectral purity and single photon heralding efficiency (HE). The proposed structure is implemented on a silicon photonic chip, and experimental results exhibit a wide range of tunability for these parameters, with excellent agreement with theoretical predictions. This flexible and multi-functional design offers a promising pathway for high-performance, highly integrated on-chip quantum information processing systems.
We experimentally engineer a high-spectral-purity single-photon source using a single-interferometer-coupled silicon microring. By the reconfiguration of the interferometer, different coupling conditions can be obtained, corresponding to different quality factors for the pump and signal/idler. The ratio between the quality factor of the pump and signal/idler ranges from 0.29 to 2.57. By constructing the signal–idler joint spectral intensity, we intuitively demonstrate the spectral correlation of the signal and idler. As the ratio between the quality factor of the pump and signal/idler increases, the spectral correlation of the signal and idler decreases, i.e., the spectral purity of the signal/idler photons increases. Furthermore, time-integrated second-order correlation of the signal photons is measured, giving a value up to 94.95 ± 3.46%. Such high-spectral-purity photons will improve the visibility of quantum interference and facilitate the development of on-chip quantum information processing.
Fully integrated high spectral purity photon-pair sources represent critical core components for scalable photonic quantum information processing systems. While micro-ring resonator based single-photon sources demonstrate superior integration capabilities, their spectral purity typically suffers from a theoretical upper bound below 92% in the absence of narrow-band spectral filtering, rendering it inadequate for advanced quantum applications. This work successfully implements an on-chip dual-pulse controlled photon pair generation architecture on a complementary metal oxide semiconductor (CMOS) compatible silicon photonic platform, achieving high spectral purity exceeding 98% by optimizing the beam splitting ratio and adjusting the relative time delay between the two pulses. Furthermore, to mitigate operating point drift in the micro-ring photon-pair generator induced by micro-heater current variations during testing, we developed a power control algorithm that locks the micro-ring resonance to the corresponding frequency of the shaped optical pulse, significantly improving long-term system stability.
Recently, many researchers focus on the integration of single photon sources on an optical chip toward the realization of large-scale quantum information processing.Identical single photons are required to obtain good interference between photons for quantum information processing, for which high "spectral purity" of single photons is required.An appealing scheme is employing the spontaneous four-wave mixing (SFWM) in a silicon micro-ring resonator (MRR) because it allows us to generate high-purity photons without external spectral filters.However, the purity value is limited to 0.92 due to the dispersion property of an MRR We have developed a new scheme to further increase the spectral purity from an MRR by manipulating the spectral phase distribution of the pump pulse.Via exploring several strategies on the spectral phase modulation, we found that the purity of single photon can be increased up to approximately 0.96 breaking the conventional limitation of 0.92 in a standard MRR.We further explore the experimental feasibility of the scheme toward future implementation.
Ring resonators are used as photon pair sources by taking advantage of the materials second or third order non- linearities through the processes of spontaneous parametric downconversion and spontaneous four wave mixing respectively. Two materials of interest for these applications are silicon for the infrared and aluminum nitride for the ultraviolet through the infrared. When fabricated into ring type sources they are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of 96% but requiring a factor of ~10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as ~ 97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.