This dissertation is devoted to the development of quantum memories for light. Quantum memory is an important part of future long-distance quantum fiber networks and quantum processing. Quantum memory is required to be efficient, multimode, noise free, scalable, and should be able to provide long storage times for practical applications in quantum communications and beyond. Here I concentrate on solving particular problems of different quantum protocols and find ways for extending the performance of memories and adding new capabilities. I theoretically show that an array of whispering-gallery resonators is capable of being an efficient and noise-free optical memory with an adjustable storage time. The potential for on-chip realization at room temperature makes the scheme attractive for easy implementation. The effect of Raman scattering in echo memory was evaluated experimentally and theoretically. The noise performance of gradient echo memory in Λ configuration proves, that the developed theory is in a good agreement with an experiment. I proposed a mechanism for extending the bandwidth of impedance-matched memories via a white-light cavity effect. The introduced additional dispersion compensates a bandwidth decrease induced by the cavity and hence increases the spectral zone of impedance matching. Theoretically the scheme allows to increase the bandwidth of high efficient storage (>90%) several times without adding extra noise. Finally, I have proposed an architecture of quantum random-access memory for time-bin photons. The architecture consists from a memory unit and a strongly coupled three-level atom. Both of them are placed in their own cavities, which are coupled to each other. The protocol allows to achieve quantum addressing of quantum information stored in the memory with only a single control unit. This is useful for numerous tasks in quantum machine learning.
This dissertation is devoted to the development of quantum memories for light. Quantum memory is an important part of future long-distance quantum fiber networks and quantum processing. Quantum memory is required to be efficient, multimode, noise free, scalable, and should be able to provide long storage times for practical applications in quantum communications and beyond. Here I concentrate on solving particular problems of different quantum protocols and find ways for extending the performance of memories and adding new capabilities. I theoretically show that an array of whispering-gallery resonators is capable of being an efficient and noise-free optical memory with an adjustable storage time. The potential for on-chip realization at room temperature makes the scheme attractive for easy implementation. The effect of Raman scattering in echo memory was evaluated experimentally and theoretically. The noise performance of gradient echo memory in Λ configuration proves, that the developed theory is in a good agreement with an experiment. I proposed a mechanism for extending the bandwidth of impedance-matched memories via a white-light cavity effect. The introduced additional dispersion compensates a bandwidth decrease induced by the cavity and hence increases the spectral zone of impedance matching. Theoretically the scheme allows to increase the bandwidth of high efficient storage (>90%) several times without adding extra noise. Finally, I have proposed an architecture of quantum random-access memory for time-bin photons. The architecture consists from a memory unit and a strongly coupled three-level atom. Both of them are placed in their own cavities, which are coupled to each other. The protocol allows to achieve quantum addressing of quantum information stored in the memory with only a single control unit. This is useful for numerous tasks in quantum machine learning.
Within any practical proposal for utilising quantum mechanics for information processing whether for the efficient computation of problems intractable by classical methods, or for secure communication; at some stage one must have the means to transfer quantum information between remote nodes of a network. For this, light is the obvious choice. To realise this vision one requires the means to overcome the ``scaling problem'' intrinsic to many photonic-based quantum technologies due to probabilistic operations. It has been identified that optical quantum memories which facilitate the storage and retrieval of quantum states of light are an enabling technology. Another requisite technology to ensure the scalability of a quantum network is the means to interface dissimilar material nodes, which in practice means the translation of quantum light in bandwidth, frequency and temporal shape. The first part of this thesis presents experimental, theoretical and numerical investigations of noise reduction in the Raman memory protocol in thermal caesium vapour, by means of a cavity. To do this, I develop a theoretical description of the cavity memory interaction, along with a model of the atom-cavity system to enable meeting the required resonance conditions. This is followed by a proof-of-concept experimental demonstration, showing suppression of noise in the retrieved state. To conclude this part, I investigate the optimisation of this system and provide a numerical framework for its design, and propose a route towards realising the Raman memory as a practical quantum memory. The second theme is an exploration of the practical application of the Raman memory as an interface for temporal modes of light. I perform a preliminary investigation, and develop characterisation tools, to experimentally verify the modal structure of the memory interaction. This work provides the basis for deploying the Raman memory as a temporal-mode selective device for GHz bandwidth quantum states of light.
Quantum technologies, for example, quantum communication and quantum computation, promise spectacular quantum enhanced advantages beyond what can be done classically. However, quantum states, as the element of quantum technologies, are very fragile and easily get lost to the environment, and meanwhile, their generation and quantum operations are mostly probabilistic. These problems make it exponentially hard to build long-distance quantum channels for quantum communication and large quantum systems for quantum computing. Quantum memory allows quantum states to be stored and retrieved in a programmable fashion, therefore providing an elegant solution to the probabilistic nature and associated limitation by coordinating asynchronous events. In the past decades, enormous advances in quantum memory have been made by developing various storage protocols and their physical implementations, and the quantum memory has gradually evolved from the initial conceptual demonstration to a nearly practical one. Aiming at being practicable for efficient synchronisation and physical scalability, an ideal quantum memory should meet several key features known as high efficiency, low noise level, large time bandwidth product (lifetime divided by pulse duration) and operating at room temperature. Here, we present the research status and development trends of this field by introducing some typical storage protocols. Among these protocols, a room-temperature broadband quantum memory is the most attractive due to its simplicity and practicability. However, at room temperature, noise becomes dominant and is a bottleneck problem that has impeded the realization of a real room-temperature broadband quantum memory in the last decades. Recently, the noise problem has been solved in two memory protocols, i.e. FORD (far off-resonance Duan-Lukin-Cirac-Zoller) protocol and ORCA (off-resonant cascaded absorption) protocol. In this paper, the working principles, the merits and demerits of various quantum memory protocols are illustrated. Furthermore, the approaches to eliminating noise and the applications of quantum memory are summarized.
Photonic quantum information processing is a key element for scalable quantum technologies, and has applications in secure long-distance quantum communication and connecting nodes of a quantum computation network. However, logical photon-photon gates and state-of-the-art single photon sources rely on probabilistic processes. Quantum memories are devices that enable storage and on-demand recall of quantum states of light, and have been highlighted as a vital component in photonic networks to overcome the scaling problem by synchronising probabilistic processes. The Raman memory has a large storage bandwidth and high synchronising capacity, and is an ideal candidate for local synchronisation. However, previous demonstrations of the Raman memory suffer from four-wave mixing noise, which prohibits quantum level operation. In this thesis I investigate methods to increase the signal to noise ratio in the Raman memory. I investigate increasing the light-matter coupling strength to boost the memory efficiency, and then explore two different methods to suppress four-wave mixing noise. I demonstrate that operating the Raman memory in a cavity is successful in reducing four-wave mixing, but it is technically challenging to maintain a high memory efficiency. I investigate a new method of noise suppression by introducing an absorption feature at the frequency of the unwanted noise field. This technically simple method is successful in reducing the noise by an order of magnitude, and will be applicable to many quantum memory protocols. In the final section of this thesis I explore the temporal mode properties of the Raman memory. I demonstrate that the Raman memory is single mode and can be used to separate and manipulate temporal modes of light. This positions the Raman memory as a key device for enabling high-dimensional photonic quantum information processing, and enhancing light-matter interactions. These results pave the way towards an efficient, low-noise, mode-selective quantum memory.
An optical quantum memory, a device which can store and retrieve on demand an arbitrary quantum state at the single photon level, has been identified as a significant cornerstone of photonic quantum technologies. The development of such a memory would allow the creation and development of a large number of quantum technologies. These would range from the ability to synchronise processing steps in an optical quantum computer, to the construction of a quantum repeater which would allow faithful transmission of quantum states over arbitrarily long distances. In this thesis I investigate broadband light storage in a room-temperature Raman memory for purposes of quantum information processing with photons. During the course of this thesis, a novel scheme to suppress four-wave mixing noise is simulated, based on equations derived to describe the physics of the memory interaction. The experimental arrangement to test the suppression method is described and an original method using photon statistics is demonstrated. The results of these experiments prove the ability of the memory to retrieve and maintain the non-classicality of the state, given a single photon input. Following the affirmation that, using this noise suppression technique, the memory can function at the single-photon level, I go on to consider how the temporal-spectral properties of a pulsed mode of light may be manipulated using the memory. There are two primary reasons for this investigation: 1) Increasing the efficiency of the read-in process by carving the optimum mode of the memory 2) Using the memory as a device operating in a high dimensional quantum information basis. The restrictions of such applications are considered and a method to test the efficacy of transformations in this basis is devised and experimentally tested. I also perform demonstrations of light storage using conventional temporal modes using a novel method of velocity selection within warm vapour. Finally I detail further experiments that are achievable with the Raman quantum memory given the progress that has been achieved during my DPhil research. The results show that the Raman memory is a viable candidate for a practical route towards low-noise quantum storage and for manipulation of temporal modes of light.
This thesis is divided into five parts, each with an accompanying publication. In Chapter 1, I motivate the broad scientific pursuit that underlies this thesis: the quest to build universal, fault-tolerant technology that operates on the principles of quantum mechanics and quantum information theory. I motivate the use of single photons as the quantum particles of choice for this task, and I describe the open challenges facing the field of researchers embarking on this quest. This motivation pervades each subsequent chapter of this thesis, which focus in turn on overcoming four distinct technological and scientific hurdles related to these open challenges. The first of these open challenges is to demonstrate experimentally a useful single-photon source. This source of single photons ought to release just one photon at a time, in an on-demand fashion, with high-rate, low-latency, and high quantum-state purity and indistinguishability, in a single spatial mode, at the right wavelengths for a given application, and ought to satisfy certain practical constraints on size, weight, power, and sensitivity to environmental noise and perturbation. This is a long list of performance metrics, some of which are orthogonal, some not, and non-trivial tradeoffs often exist between metrics. While in this thesis we do not present a solution to this general open problem, we modestly expand scientific knowledge of one of the fundamental mechanisms behind single-photon generation. In particular, we present a new formalism for describing the quantum properties of spontaneous Stokes scattering in the Raman interaction, and we probe its effects on the quantum state purity of resulting Stokes photons both experimentally and theoretically. This is the focus of Chapter 2. Another open challenge to universal, fault-tolerant photonic quantum processing is the experimental demonstration of a useful photonic quantum memory—a device that is capable of storing and releasing single photons in a quantum-information-conserving manner, and which possesses sufficiently high performance across, again, a large set of non-orthogonal metrics. On this challenge, we have made several substantial contributions. Chapter 3 describes a novel approach to optimizing the efficiency of photonic quantum memories in atomic ensembles possessing a three-level Lambda-type energy level structure, in an experimentally friendly fashion. Chapter 4 discusses the practical side of implementing robust quantum memory in these atomic systems, where we carefully consider the theoretical sensitivity of these systems to experimental noise and perturbation. These two Chapters lead up to the experimental work described in Chapter 5, where we experimentally demonstrate a state-of-the-art and best-in-class photonic quantum memory in neutral barium vapor that possesses simultaneously high efficiency, broad bandwidth, and low noise. Our experimental demonstration features >95% storage efficiency, at roughly 3 orders of magnitude larger bandwidth (higher speed) than the previous state of the art, as well as record-low noise for Lambda-type atomic memories. The noise is so low, and the bandwidth so large, that we are able to perform a novel characterization experiment to extract the temporal amplitude and phase of the photons retrieved from our memory, based on spectral interferometry with a known reference. This is the most demanding possible characterization of one of these memories, and has direct implications for using this type of memory in quantum processing tasks that require temporally indistinguishable photons. In Chapter 6 I do the requisite summing up of the thesis, and discuss ongoing and future work on the memory project. In the various and sundry appendices I include information that will chiefly be useful for my successors in the lab, but may be of passing interest to other readers.
Optical quantum memories are devices that store and recall quantum light and are vital to the realization of future photonic quantum networks. To date, much effort has been put into improving storage times and efficiencies of such devices to enable long-distance communications. However, less attention has been devoted to building quantum memories which add zero noise to the output. Even small additional noise can render the memory classical by destroying the fragile quantum signatures of the stored light. Therefore, noise performance is a critical parameter for all quantum memories. Here we introduce an intrinsically noise-free quantum memory protocol based on two-photon off-resonant cascaded absorption (ORCA). We demonstrate successful storage of GHz-bandwidth heralded single photons in a warm atomic vapor with no added noise, confirmed by the unaltered photon-number statistics upon recall. Our ORCA memory meets the stringent noise requirements for quantum memories while combining high-speed and room-temperature operation with technical simplicity, and therefore is immediately applicable to low-latency quantum networks.